Da-Lite Touch Interactive 29590 Handleiding

Da-Lite Projector accessoire Touch Interactive 29590

Lees hieronder de đź“– handleiding in het Nederlandse voor Da-Lite Touch Interactive 29590 (2 pagina's) in de categorie Projector accessoire. Deze handleiding was nuttig voor 14 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/2
INSTRUCTIONS FOR
Touch Interactive Bracket Kits (Small and Large)
Tools Required for Installation Installation
1. Using the provided #4 x ½” screws and #4 nuts, attach the
touch module base plate to the bracket.
NOTE: Some touch modules will attach to the bracket with
magnets. If the touch module allows attachment using
hardware or magnets, hardware attachment is
recommended.
2. Remove the cover from the touch module. Using the screws
provided with the projection system, attach the touch
module to the touch module base plate.
3. Position the bracket with touch module along the top of the
IDEA Screen or IDEA Panoramic according to the projector
manufacturer’s instructions. Using the two provided #8 x ½”
screws, attach the bracket and touch module to the IDEA
frame with the touch module facing towards the audience.
NOTE: If the projector instructions do not specify a position,
center the bracket relative to the projected image. The lat
vertical surface of the touch interactive bracket should be
lush to the face of the IDEA frame.
4. Follow manufacturer’s instructions for aligning the IR curtain.
Required Hardware - Provided
Figure 1
Small Bracket Installation
Phillips Screwdriver
(2) #8 x ½” Screws(2) #4 x ½” Screws (2) #4 Nuts
NOTE: Interactive module terminology may vary from manufacturer to manufacturer.
#8 x ½" Screws
#4 x 1/2”
Screws
#4 Nuts
Screws Supplied with
Touch Module
Touch Module
Base Plate
Touch Module
1/4” Wrench
10812
Installation
1. Remove the cover from the touch module. Using the
provided M4 x 30mm screws and M4 nuts, attach the touch
module to the touch interactive bracket as shown.
NOTE: Some touch modules will attach to the bracket with
magnets. If the touch module allows attachment using
hardware or magnets, hardware attachment is
recommended.
2. Position the bracket with touch module along the top of the
IDEA Screen or IDEA Panoramic according to the projector
manufacturer’s instructions. Using the two provided #8 x ½”
screws, attach the bracket and touch module to the IDEA
frame with the touch module facing towards the audience.
NOTE: If the projector instructions do not specify a position,
center the bracket relative to the projected image. The lat
vertical surface of the touch interactive bracket should be
lush to the face of the IDEA frame.
3. Follow manufacturer’s instructions for aligning the IR curtain.
Figure 2
Large Bracket Installation
Tools Required for Installation
Required Hardware - Provided
Phillips Screwdriver
(2) #8 x ½” Screws(2) M4 x 30mm
Screws
(2) M4 Nuts
NOTE: Interactive module terminology may vary from manufacturer to manufacturer.
#8 x ½" Screws
M4 x 30mm
Screws
M4 Nuts
Touch Module
7mm Wrench
A BRAND OF MILESTONE AV TECHNOLOGIES | www.milestone.com
P 800.622.3737 / 574.267.8101 877.325.4832 / 574.267.7804 F
E info@da-lite.com
In British Columbia, Milestone AV Technologies ULC carries on business as MAVT
Milestone AV Technologies ULC.
©2017 Milestone AV Technologies. DL0712 (Rev. 2) 06.17.
Da-Lite is a registered trademarks of Milestone AV Technologies. All other brand names or
marks are used for identiication purposes and are trademarks of their respective owners.
All patents are protected under existing designations. Other patents pending.


Product specificaties

Merk: Da-Lite
Categorie: Projector accessoire
Model: Touch Interactive 29590

Heb je hulp nodig?

Als je hulp nodig hebt met Da-Lite Touch Interactive 29590 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Projector accessoire Da-Lite

Handleiding Projector accessoire

Nieuwste handleidingen voor Projector accessoire