D-Link DIS-100G-8SW Handleiding

Bekijk gratis de handleiding van D-Link DIS-100G-8SW (4 pagina’s), behorend tot de categorie Niet gecategoriseerd. Deze gids werd als nuttig beoordeeld door 22 mensen en kreeg gemiddeld 4.5 sterren uit 4 reviews. Heb je een vraag over D-Link DIS-100G-8SW of wil je andere gebruikers van dit product iets vragen? Stel een vraag

1

DIS-100G Series Unmanaged

Industrial Gigabit Ethernet

Switch

Quick Installation Guide

Overview

The DIS-100G unmanaged Industrial Gigabit Ethernet

Switch solutions are designed for supporting standard

industrial applications without complex setup to makethe

network truly plug-and-play.

If the equipment is used in a manner not specified by the

manufacturer, the protection provided by the equipment

may be impaired.

Package Checklist

Please verify that the box contains the following items:

Item Quantity

Unmanaged switch1

Wall-mount plates2

DIN-Rail kit1

M4 Screws

(for thewall mount plates & DIN Rail kit)

4

DC power terminal block1

Quick Installation Guide1

Safety Instructions

When a connector is removed during installation, testing, or

servicing, or when an energized fiber is broken, a risk of

ocular exposure to optical energy that may be potentially

hazardous occurs, depending on the laser output power.

The primary hazards of exposure to laser radiation from an

optical-fiber communication system are:

Damage to the eye by accidental exposure to a beam

emitted by a laser source.

Damage to the eye from viewing a connector attached

to a broken fiber or an energized fiber.

Documentation Conventions

The following conventions are used in this quick installation

guideto emphasize information that will be of interest to the

reader.

Danger — The described activity or situation might or

will cause personal injury.

Warning — The described activity or situation might or

will cause equipment damage.

Caution — The described activity or situation might or

will cause service interruption.

Note — The information supplements the text or

highlights important points.

DIN-Rail Mounting

Mounting step:

1.Screw the DIN-Rail bracket on with the bracket and

screws in the accessory kit.

2.Hook the unit over the DIN rail.

3.Push the bottom of the unit towards the DIN Rail until it

snaps into place.

Wall Mounting (unit: mm)

Mounting step:

1.Screw on the wall-mount plate on with the plate and

M4 screws in the accessory kit.

2

3

Product specificaties