CyberPower OR2200PFCRT2UA Handleiding

CyberPower UPS OR2200PFCRT2UA

Lees hieronder de 📖 handleiding in het Nederlandse voor CyberPower OR2200PFCRT2UA (13 pagina's) in de categorie UPS. Deze handleiding was nuttig voor 28 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/13

User’s Manual

OR1500PFCRT2U / OR2200PFCRT2U / OR2200PFCRT2Ua

K01-0000206-00

(SAVE THESE INSTRUCTIONS)

This manual contains important safety instructions. Please read and follow all instructions carefully during

installation and operation of the unit. Read this manual thoroughly before attempting to unpack, install, or

operate your UPS.

CAUTION! To prevent the risk of fire or electric shock, install in a temperature and humidity controlled indoor

area free of conductive contaminants. (Please see specifications for acceptable temperature and humidity

range).

CAUTION! To reduce the risk of electric shock, do not remove the cover except to service the battery. Ensure

the input power is removed before servicing the batteries. There are no user serviceable parts inside except for

the battery.

CAUTION! Hazardous live parts inside can be energized by the battery even when the AC input power is

disconnected.

CAUTION! The UPS must be connected to an AC power outlet with fuse or circuit breaker protection. Do

not plug into an outlet that is not grounded. If you need to de-energize this equipment, turn off and unplug the

unit.

CAUTION! To avoid electric shock, turn off the unit and unplug it from the AC power source before servicing

the battery or installing a computer component.

CAUTION! To reduce the risk of fire, connect only to a circuit provided with 20 (OR1500PFCRT2U and

OR2200PFCRT2U) or 30 (OR2200PFCRT2Ua) amperes maximum branch circuit over current protection in

accordance with the National Electric Code, ANSI/NFPA 70.

CAUTION! The UPS is suitable for use in a computer room as defined in the Standard for the Protection of

Electronic Computer/Data Processing Equipment, ANSI/NFPA 75.

DO NOT USE FOR MEDICAL OR LIFE SUPPORT EQUIPMENT! CyberPower Systems does not sell

products for life support or medical applications. use in any circumstance that would affect the DO NOT

operation and safety of life support equipment, medical applications, or patient care.

DO NOT USE WITH OR NEAR AQUARIUMS! To reduce the risk of fire or electric shock, do not use with or

near an aquarium. Condensation from the aquarium can cause the unit to short out.

INTRODUCTION

Thank you for selecting a CyberPower Systems UPS product. This UPS is designed to provide unsurpassed

power protection, operation and performance during the lifetime of the product.

UNPACKING

Inspect the UPS upon receipt. The box should contain the following:

(a) UPS unit x 1 (b) User’s manual x 1 (c) Rack mount brackets x 2 (d) Vertical stands x 2 (e) Telephone cable x

1 (f) Emergency Power Off cable (gray) x 1 (g) PowerPanel

Business Edition software CD x 1 (h) Serial cable

x 1 (i) USB A+B type cable x 1 (j) Warranty registration card x 1

IMPORTANT SAFETY INSTRUCTIONS

INSTALLING YOUR UPS SYSTEM

SUPPORTS PFC POWER SUPPLIES

This CyberPower UPS system supports High Efficiency power supplies with Power Factor Correction (PFC).

PFC is used to improve the efficiency of power delivery. The current US Energy Star

Program Requirements

for Computers (version 5.0) mandates PFC for all power supplies over 100 watts. Additionally, programs such

as 80 Plus

are often used to identify high efficiency power supplies with PFC.

WHAT IS AVR

The OR1500PFCRT2U/OR2200PFCRT2U/OR2200PFCRT2Ua provides

complete power protection from utility power that is not always consistent.

The OR1500PFCRT2U features 1840 Joules of surge protection and the

OR2200PFCRT2U/OR2200PFCRT2Ua features 2060 Joules of surge

protection. Both units provide long lasting battery backup during power

outages with maintenance free batteries. The OR1500PFCRT2U /

OR2200PFCRT2U / OR2200PFCRT2Ua ensures consistent power to your

computer system and includes software that will automatically save your

open files and shutdown your computer system during a utility power loss.

AUTOMATIC VOLTAGE REGULATOR

The OR1500PFCRT2U/OR2200PFCRT2U/OR2200PFCRT2Ua stabilizes inconsistent utility power voltage to

nominal levels that are safe for equipment. Inconsistent incoming utility power may be damaging to important

data files and hardware, but with Automatic Voltage Regulation (AVR), damaging voltage levels are corrected

to safe levels. AVR automatically increases low utility power and decreases high utility power to a consistent

and safe 110/120 volts. If incoming utility voltage drops below 90 volts, or exceeds 140 volts the units

automatically switch to battery back-up power.

HOW TO DETERMINE THE POWER REQUIREMENTS OF YOUR EQUIPMENT

1. Ensure that the equipment plugged into the outlet does not exceed the UPS unit’s rated capacity

(1500VA/900W for OR1500PFCRT2U, 2000VA/1320W for OR2200PFCRT2U, and 2200VA/1320W for

OR2200PFCRT2Ua). If the rated capacities of the unit are exceeded, an overload condition may occur and

cause the UPS unit to shut down or the circuit breaker to trip.

2. There are many factors that can affect the amount of power that your computer system will require. It is

suggested that the load placed on the battery outlets not exceed 80% of the unit’s capacity.

HARDWARE INSTALLATION GUIDE

1. Your new UPS may be used immediately upon receipt. However,

recharging the battery for at least 8 hours is highly recommended

to ensure that the battery’s maximum charge capacity is achieved.

A loss of charge may occur during shipping and storage. To recharge

the battery, simply leave the unit plugged into an AC outlet.

2. With the UPS unit turned off and unplugged, connect your computer,

monitor, and any other peripherals requiring battery backup into the

battery power supplied outlets. For pluggable equipment, the socket-outlet

shall be installed near the equipment and shall be easily accessible.

DO NOT plug a laser printer, paper shredder, copier, space heater, vacuum,

sump pump or other large electrical devices into the UPS. The power demands

of these devices may overload and damage the unit.

3. To protect a fax, phone or modem, connect a telephone cable or network cable from

the wall jack outlet to the IN jack of the UPS. Connect a telephone cable or network

cable from the OUT jack of the UPS to a fax machine, telephone, modem, or network

devices.

4. Plug the UPS into a 2 pole, 3 wire grounded receptacle (wall outlet). Make sure the

wall branch outlet is protected by a fuse or circuit breaker and does not service equipment

with large electrical demands (e.g. air conditioner, copier, etc…). The warranty prohibits

the use of extension cords, outlet strips, and surge strips.

Product specificaties

Merk:	CyberPower
Categorie:	UPS
Model:	OR2200PFCRT2UA
Kleur van het product:	Zwart
Gewicht:	27200 g
Snoerlengte:	3 m
Aantal USB 2.0-poorten:	1
Aantal Ethernet LAN (RJ-45)-poorten:	1
Certificering:	UL1778, cUL 107.3, FCC DOC B, RoHS
Geluidsalarm(en):	Ja
Responstijd:	4 ms
Meegeleverde software:	PowerPanel Business Edition
Uitgangsvermogen:	1320 W
Accu/Batterij oplaadtijd:	8 uur
Frequentie:	47/63 Hz
Gewicht (imperiaal):	60 lbs
Bedrijfstemperatuur, bereik:	32 - 95 °F
Afmetingen (B x D x H):	431.8 x 88.9 x 388.62 mm
Seriële poort(en):	2
Modem (RJ-11) poort:	1
Bedrijfstemperatuur (T-T):	0 - 35 °C
Relatieve vochtigheid in bedrijf (V-V):	0 - 90 procent
Batterijtechnologie:	Sealed Lead Acid (VRLA)
Afmetingen (B x D x H) (Brits):	17 x 3.5 x 15.3 "
Type beeldscherm:	LCD
Type batterij:	12V/9AH
Surge energy rating:	2060 J
Output power capacity:	2.2 kVA
UPS-topologie:	Line-interactive
Typische backup tijd op halve lading:	20 min
Typische backup tijd op volledige lading:	8 min
Emergency Power Off (EPO):	Ja
Vervangings-batterij cartridge:	HR9-12/NPW45-12FR