CyberPower MP1045SW Handleiding

CyberPower Niet gecategoriseerd MP1045SW

Lees hieronder de 📖 handleiding in het Nederlandse voor CyberPower MP1045SW (2 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 83 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/2

8-Outlet Surge Protector

(6 AC & 2 USB ports)

P600WSURC1

MP1045SW

Surge Protector + USB

Combo Pack

FEATURES

1. Surge Protected Indicator

Illuminated when the surge protection feature is working properly.

2. Ground Indicator LED

Illuminated when the Ground protection feature is working properly.

3. Six Standard Outlets

4. Pivoting Outlets

Pivoting outlets for ease of use and convenience

5. USB Charging Ports*

Connect and charge up to two (2) USB devices using the surge protected USB powering ports.

*USB outlets cannot be used as a USB hub. This device does not transfer data.

SPECIFICATIONS

• Model Number: P600WSURC1

• Outlets: 6 Standard Outlets, 2 USB Charger Ports

• Surge Protection: 1200 Joules

• Electrical Rating: 125V/15A/1875W

• USB charger rating: 5V/2.1A total

• UL Clamping Voltage: UL 1449 3rd/400V (H-N, N-G), 500(H-G)

• Maximum Peak Current: 60,000A

• 3 AC Lines Protected: H-N: 30,000A, H-G: 15,000A, N-G: 15,000A;

(The maximum surge possible on household Wiring is 6,000 volts)

• Response Time: Less than 1 nanosecond

• Attenuation: Up to 32dB

• EMI/RFI Filtration: 150 kHz to 100 MHz

TROUBLESHOOTING

If the Grounded indicator does not light when you plug in the surge protector,move the surge

protector to a different grounded three-prong AC outlet. If it still does not light, return the product

to dealer for assistance. If the surge protector proves to be working properly, your outlets may not

be properly grounded and should be inspected by a professional electrician.

If the Grounded indicator turns off after a period of use, the surge protection has been depleted.

Replace your surge protector.

If the Protected indicator does not light, the surge protector’s AC line is no longer protected from

surge. Replace the surge protector. The surge protector may have received a power surge or spike

beyond its specified limits that overloaded the protection circuitry and rendered it inactive. The

surge protector has protected your connected equipment but it will not protect against future

surges and spikes.

User Manual

8-Outlet Surge Protector

(6 AC & 2 USB ports)

P604U

FEATURES

1. ON/OFF Reset Control Switch and Circuit Breaker

Controls power to all outlets. The switch is also a 15A breaker. When an overload occurs, it will

automatically switch off. To resume operation, ensure the overload condition is removed and

reset the surge protector by switching the unit ON.

2.Surge Protected Indicator

Illuminated when the surge protection is working properly.

3. Six Standard Outlets

4. USB Charging Ports*

Connect and charge up to two (2) USB devices using the surge protected USB charging ports.

*USB outlets cannot be used as a USB hub. This device does not transfer data.

SPECIFICATIONS

• Model Number: P604U

• Outlets: 6 Standard Outlets, 2 USB Charger Ports

• Surge Protection: 900 Joules

• Electrical ating: R 125V/15A/1875W

• USB charger rating 5V/2. A total4

• UL Clamping Voltage: UL 1449 3rd/400V(L-N,L-G,N-G)

• Maximum Peak Current: 45,000A

• 3 AC Lines Protected: L-N:15,000A, L-G:15,000A, N-G:15,000A

(The aximum urge ossible n ousehold ring s 000 m s p o h wi i 6,

volts)

• Response Time: Less than 1 nanosecond

• Attenuation: Up to 32dB

• EMI/RFI Filtration: 150 kHz to 100 MHz

• Circuit Breaker: Resettable 15 Amp

TROUBLESHOOTING

If the ON/OFF is switched off, the 15 AMP circuit breaker may have tripped. Examine your

connected equipment and remove the device that is overloading the circuit. Then, turn the ON/OFF

switch back to RESET.

If the Protected indicator does not light, the surge protector’s AC line is no longer protected from

surge. Replace the surge protector. The surge protector may have received a power surge or spike

beyond its specified limits that overloaded the protection circuitry and rendered it inactive. The

surge protector has protected your connected equipment but it will not protect against future

surges and spikes.

CONGRATULATIONS ON YOUR PURCHASE

Thank you for selecting the CyberPower MP1045SW Surge Protector + USB

Combo Pack. The information contained in this brochure explains the features and

operation of the MP1045SW Surge Protector + USB Combo Pack. Please take a

few moments to read this manual.

2.4

2.42.4

AMP

AMPAMP

K01-1101018-00

This device is manufactured using environmentally-

safe procedures in compliance with the Restriction

of Hazardous Substances (RoHS) directive.

Please join CyberPower in caring for the

environment by recycling this manual.

Where can I get more information?

Contact CyberPower at 4241 12th Ave E., STE 400, Shakopee, MN 55379; call us

at (877) 297-6937; or send us an e-mail message at claims@cpsww.com.

PRODUCT REGISTRATION

Prompt product registration assures coverage under the Limited Warranty, and

also allows the opportunity to be notified of product enhancements, upgrades,

and other announcements.

Registration is quick and easy at www. /register. CyberPowerSystems.com

CONTACT NFORMATION I

CyberPower Systems, Inc.

4241 12th Avenue East Suite 400 Shakopee, MN 55379

Toll-free: 1-877-297-6937 | CyberPowerSystems.com

CONFORMANC PROVALSE AP

This device complies with Part 15 of the FCC Rules.

Operation is subject to the following two conditions: 1. This device may not cause

harmful interference, and 2. This device must accept any interference received,

including interference that may cause undesired operation. Changes or modifications

not expressly approved by the party responsible for compliance could void the user’s

authority to operate the equipment. This Class B digital apparatus complies with

Canadian ICES-003.

Note: These limits are designed to provide reasonable protection against harmful

interference in a residential installation. This equipment generates, uses and can

radiate radio frequency energy and, if not installed and used in accordance with the

instructions, may cause harmful interference to radio communications. However, there

is no guarantee that interference will not occur in a particular installation. If this

equipment does cause harmful interference to radio or television reception, which can

be determined by turning the equipment off and on, the user is encouraged to try to

correct the interference by one or more of the following measures: Reorient or relocate

the receiving antenna. Increase the separation between the equipment and receiver.

Connect the equipment into an outlet on a circuit different from that to which the

receiver is connected. Consult the dealer or an experienced radio/TV technician for help.

This device is manufactured using environmentally-safe procedures in compliance with

the Restriction of Hazardous Substances (RoHS) directive.

CAUTION

TO REDUCE THE RISK OF ELECTRIC SHOCK - Use only in dry locations and only

indoors.

DO NOT plug into another relocatable power tap. DO NOT “daisy chain” surge

protectors.

DO NOT use with any aquarium equipment. DO NOT use if properly grounded

outlets are not available. DO NOT install this device if there is not at least 10

meters (30 feet) or more of wire between the electrical outlet and electrical

service panel. This device features an internal protection that will disconnect

the surge protective component at the end of its useful life, but will maintain

power to the load – now unprotected.

TECHNICAL SUPPORT

Please contact our Tech Support department with installation, troubleshoot-

ing, or general product questions.

• Phone: -877-297-6937 1

•Visit: CyberPowerSystems.com/support

• Hours of Operation: Monday – Friday, 7:00am – 6:00pm CST

LIMITED WARRANTY AND CONNECTED EQUIPMENT GUARANTEE

Read the following terms and conditions carefully before using the CyberPower

MP1045SW (the “CPS Product”).

By using the CPS Product, you consent to be bound by the terms and conditions

of this Limited Warranty and Connected Equipment Guarantee (together

referred to as this “Warranty”). IF YOU DO NOT AGREE TO THE TERMS AND

CONDITIONS OF THIS WARRANTY, YOU SHOULD RETURN THE PRODUCT FOR A

FULL REFUND PRIOR TO USING IT.

Who is providing this Warranty, what does it cover?

CyberPower Systems (USA), Inc. (“CyberPower”) provides this Limited

Warranty. It only covers the original purchaser and ends if you no longer own

the CPS Product. This warranty covers defects in materials and workmanship in

the CPS Product under normal use and conditions.

It also covers equipment connected to the CPS Product and

damaged because of the failure of the CPS Product.

This warranty covers the CPS Product and connected equipment for as long as

you own the CPS Product.

What must I do to make a warranty claim?

1. Call (877) 297-6937 or write to CyberPower, 4241 12th Ave. E., STE 400,

Shakopee, MN 55379 or send a message at claims@cpsww.com for

instructions.

2. Identify the Product, the Purchase Date, and the item(s) of Connected

Equipment.

3. Provide a dated Proof-of-Purchase receipt (or other proof of the original

purchase) and provide a description of the defect.

4. Pack and ship the product to CyberPower and, if requested, the item(s) of

Connected Equipment, and all claim forms that CyberPower provides to you.

Show the Claim Number on the shipping label or include it with the product.

You must prepay all shipping costs, you are responsible for packaging and

shipment, and you must pay the cost of the repair estimate.

5. Do each of these within ten days of the occurrence.

What will CyberPower do to correct problems?

CyberPower will inspect and examine the CPS Product. If the CPS Product is

defective in material or workmanship, CyberPower will repair or replace it at

CyberPower’s expense, or CyberPower will refund the full purchase price you

paid for the CPS Product (purchase receipt showing price paid is required). If the

CPS Product failed to protect any equipment plugged into it, we will also send

you forms for making your claim for the connected equipment. We will repair

or replace the equipment that was damaged because of the failure of the CPS

Product or pay you the fair market value (NOT REPLACEMENT COST) of the

equipment at of the time of the damage. We will use Orion Blue Book, another

a third-party valuation guide, eBay, Craigslist, or other source to establish that

amount. Our maximum liability is limited to $50,000 for the P604U and

$75,000 for the P600WSURC1.

Who pays for shipping?

We pay when we send items to you; you pay when you send items to us.

What are some things this Warranty does not cover?

1. THIS WARRANTY DOES NOT COVER ANY SOFTWARE THAT WAS DAMAGED

OR NEEDS TO BE REPLACED DUE TO THE FAILURE OF THE CPS PRODUCT OR

ANY DATA THAT IS LOST AS A

RESULT OF THE FAILURE OR THE RESTORATION OF DATA OR RECORDS, OR

THE REINSTALLATION

OF SOFTWARE.

2. This Warranty does not cover: misuse, modification, operation or storage

outside environmental limits of the CPS Product or the equipment

connected to it, or for damage while in transit or in storage, nor if there has

been improper operation or maintenance, or use with items not designed or

intended for use with the CPS Product, such as laser printers, appliances,

aquariums, medical or life support devices, etc.

What are the other limitations?

The sole and exclusive remedies of the Initial Customer are those provided by

this Warranty.

1. This Warranty does not apply unless the CPS Product and the connected

equipment were connected to properly wired and grounded outlets

(including compliance with electrical and safety codes of the most current

electrical code), without the use of any adapters or other connectors.

2. The CPS Product must have been plugged directly into the power source and

the equipment connected to the CPS Product must be directly connected in

the CPS Product, not “daisy-chained” together in serial fashion with any

extension cords, another Product or device similar to the CPS Product, surge

suppressor, or power tap. Any such installation voids the Warranty.

3. The CPS Product and connected equipment must have been used properly in

a suitable and proper environment, in conformance with any applicable

license, instruction manual, or warnings.

4. The CPS Product must have been used at all times within the limitations on

the CPS Product’s VA capacity.

UL Listed to U.S. and Canadian

Safety Standards UL 1449. This

product is listed to applicable U.S.

and Canadian safety standards by

Underwriters Laboratories Inc.

WARNING: This product can expose you to chemicals including bisphenol A (BPA) and styrene (ABS), which is known to the State

of California to cause reproductive harm and cancer. For more information, go to www.P65Warnings.ca.gov.

All other trademarks are the property of their respective owners.

Product specificaties

Merk:	CyberPower
Categorie:	Niet gecategoriseerd
Model:	MP1045SW

Heb je hulp nodig?

Als je hulp nodig hebt met CyberPower MP1045SW stel dan hieronder een vraag en andere gebruikers zullen je antwoorden

Uw naam*

Jouw email*

Schrijf hier uw vraag

Handleiding Niet gecategoriseerd CyberPower

CyberPower CST150UC-FC Handleiding

12 April 2024

CyberPower P504UC Handleiding

3 April 2024

CyberPower BRG1500AVRLCD2 Handleiding

5 Januari 2024

CyberPower PR1500RTXL2UC Handleiding

5 Januari 2024

CyberPower CP1350AVRLCD3 Handleiding

27 November 2023

CyberPower PR2200RTXL2UC Handleiding

27 November 2023

CyberPower CSN30C12V-E Handleiding

15 Augustus 2023

CyberPower PDU33105 Handleiding

15 Augustus 2023

CyberPower PR3000RT2UC Handleiding

3 Augustus 2023

CyberPower PR3000RTXL2UC Handleiding

3 Augustus 2023

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd

Playtive IAN 327221 Handleiding

1 Mei 2024

Samsung UN32J4001AF Handleiding

1 Mei 2024

Bauknecht KSI 18GF2 P2 Handleiding

27 April 2024

Fakir Artemis TS 150 Handleiding

26 April 2024

Sony UTX-M03 Handleiding

26 April 2024

Sony URX-P03 Handleiding

26 April 2024

Sony WRU-806B Handleiding

26 April 2024

Sony UTX-B03 Handleiding

26 April 2024

Sony UTX-P03 Handleiding

26 April 2024

Sony ODS-L10 Handleiding

26 April 2024