CyberPower B604BK Handleiding

Bekijk gratis de handleiding van CyberPower B604BK (1 pagina’s), behorend tot de categorie Stopcontact. Deze gids werd als nuttig beoordeeld door 14 mensen en kreeg gemiddeld 5.0 sterren uit 6 reviews. Heb je een vraag over CyberPower B604BK of wil je andere gebruikers van dit product iets vragen? Stel een vraag

FEATURES

protection that will disconnect the surge protective component at the end of its

useful life, but it will maintain unprotected power to the load.

CAUTION

TO REDUCE THE RISK OF ELECTRIC SHOCK:

Use only in dry locations and only indoors.

DO NOT plug into another relocatable power tap.

DO NOT “daisy chain” surge protectors.

DO NOT use with any aquarium equipment.

DO NOT use if properly grounded outlets are not available.

DO NOT install this device if there is less than 10 meters (30 feet) of wire between

the electrical outlet and electrical service panel.

DO NOT use for medical or life support equipment. This device features an internal

TROUBLESHOOTING

YOUR ULTIMATE ALLY IN POWER

Cyber Per Systems (USA), Inc. ow

4241 12th Avenue East, Suite 400 | Shakopee, MN 55379

CyberPerSystems.com ow

SPECIFICATIONS

K01-E000120-00

1. ON/OFF Reset Control Switch and Circuit Breaker

Controls power to all outlets. The switch is also a

15A breaker. When an overload occurs, it will

automatically switch o˜. To resume operation,

ensure the overload condition is removed and reset

the surge protector by switching the unit ON.

2. Protected LED Indicator

Illuminated when the surge protection feature is

working properly.

3. Standard Grounded Outlets (6)

4. Power Cord

Model Number: B6032PK/B604/B604BK/

B608/B6012

Outlets: Standard Grounded Outlets (6),

Per Cord Length: B6032PK: 3 ft ow

B604/B604BK: 4ft

B608: 8 ft

B6012: 12 ft

Surge Protection: 600 Joules

Electrical Rating: 125V/15A/1875W

UL Clamping Voltage: UL1449 4th/800V(L-N)

Maximum Peak Current: L-N 15,000 A

Response Time: Less than 1 nanosecond

Circuit Breaker: Resettable 15 Amp

6-OUTLET

SURGE PROTECTOR

B6032PK/B604/B604BK/B608/B6012

FOR MORE INFORMATION

Visit CyberPerSystems.com for more information regarding: ow

• Product information and certifications

• Product warranty

• Connected equipment guarantee

TECHNICAL SUPPORT

Visit: CyberPerSystems.com/support ow

Toll-Free: 1-877-297-37 69

© 2025 Cyber Power Systems (USA), Inc. All rights reserved.

CyberPower and the CyberPower logo are trademarks of Cyber Power

Systems, Inc., and/or aliates, which are registered in many countries and

regions. All other trademarks are the property of their respective owners.

If the ON/OFF Reset Control switches to the OFF position, the 15-amp circuit

breaker may have been tripped. Examine your connected equipment and

remove the device overloading the circuit, causing the trip. Then, turn the

ON/OFF Reset Control back to RESET.

If the PROTECTED indicator does not light, the surge protector’s outlets are no

longer protected from power surges or spikes. The surge protector may have

received a power surge or spike beyond its specified limits that have

overloaded the protection circuitry and rendered it inactive. The surge

protector has protected your connected equipment as designed, but it will not

protect against future surges and spikes. It should be replaced.

1

4

2

3

i WARNING: This product can expose you to chemicals including vinyl chloride

and bisphenol A (BPA), which is known to the State of California to cause cancer

and birth defects or other reproductive harm. For more information go to www.

P65Warnings.ca.gov.

Product specificaties