CyberData Systems SIP-enabled IP V3 Handleiding

Bekijk gratis de handleiding van CyberData Systems SIP-enabled IP V3 (4 pagina’s), behorend tot de categorie Intercomsysteem. Deze gids werd als nuttig beoordeeld door 109 mensen en kreeg gemiddeld 4.2 sterren uit 8 reviews. Heb je een vraag over CyberData Systems SIP-enabled IP V3 of wil je andere gebruikers van dit product iets vragen? Stel een vraag

Quick Start Guide930473A

1.0 Out-of-Box and Prior to Final Installation

1.1. Download the current manual, otherwise known as an Operation Guide,

which is available on the Documentation page at the following website

address:

http://www.cyberdata.net/products/voip/digitalanalog/intercomv3/docs.html

NoteYou can also navigate to the Documentation page by going to

www.CyberData.net

and following the steps that are indicated by

the following figures:

2.0 Select Power Source

PoE SwitchPoE Injector

Set PoE power type to Class 0 = 13WCAT6 cable recommended—

for longer distances

Be sure you are using a non-PoE switch or port

Make sure port is not in trunk mode

Set port to full duplex/ 100mbps

Spanning Tree Protocol (STP) must be disabled or Portfast enabled

1

2

3

VoIP V3 Outdoor Intercom

Quick Start Guide

The IP Endpoint Company

Product specificaties