Curtis GEM-120A Handleiding

Bekijk gratis de handleiding van Curtis GEM-120A (18 pagina’s), behorend tot de categorie Koffiezetapparaat. Deze gids werd als nuttig beoordeeld door 9 mensen en kreeg gemiddeld 4.1 sterren uit 9 reviews. Heb je een vraag over Curtis GEM-120A of wil je andere gebruikers van dit product iets vragen? Stel een vraag

1

This Curtis Generation 4 Unit is Factory Pre-Set and Ready to Go Right from the Box.

Following are the Factory Settings for your G4 Coffee Brewing System:

• Brew Temperature = 200°F • Water Bypass = On for LARGE & MEDIUM Brew Only

• Brew Volume = Set to Vessel Requirement.

System Requirements:

• Water Source 20 – 90 PSI (Minimum Flow Rate of 1 GPM)

• Electrical: See attached schematic for standard model or visit www.wilburcurtis.com for your model.

Model

G4GEMS

CAUTION: DO NOT

connect this brewer to hot

water. The inlet valve is

not rated for hot water.

CAUTION: Please use

this setup procedure

before attempting to use

this brewer. Failure to follow the

instructions can result in injury or the

voiding of the warranty.

IMPORTANT: Equipment

to be installed to comply

with applicable govern-

mental plumbing/electrical codes

having jurisdiction.

ISO 9001:2008 REGISTERED

WILBUR CURTIS CO., INC.

6913 West Acco Street

Montebello, CA 90640-5403

For the latest information go to

www.wilburcurtis.com

Tel: 800-421-6150

Fax: 323-837-2410

For the latest specications and information go to www.wilburcurtis.com

This equipment is designed for commercial use. Any servicing other than cleaning and routine maintenance

should be performed by an authorized Wilbur Curtis Company Service Technician.

•DONOTimmersetheunitinwateroranyotherliquid

•Toreducetheriskofreorelectricshock,DONOTopenservicepanels.Therearenouserserviceable

parts inside.

•Keephandsandotheritemsawayfromhotareasoftheunitduringoperation.

•Nevercleanwithscouringpowdersorharshchemicals.

Important Safeguards/Symbols

Service Manual – G4 Gem Single Head Brewer

Wilbur Curtis Company, inC.

Symbols:

WARNINGS – To help avoid personal injury

Important Notes/Cautions – from the factory

Sanitation Requirements

NSF International requires the following water connection:

1. A quick disconnect or additional coiled tubing (at least 2x the depth of the unit) is required so

that the unit can be moved for cleaning.

2. This unit must be installed with adequate backow protection to comply with applicable federal,

state and local codes.

3. Water pipe connections and xtures directly connected to a portable water supply shall be sized,

installed and maintained in accordance with federal, state, and local codes.

3. Connect the unit to an electrical outlet with appropriate amperage rating (see serial tag on machine).

4.Oncepowerhasbeensuppliedtotheunit,ipthetoggleswitchtothe‘ON’position(locatedontherearof

theunit),thewatertankwillbegintoll.Whenthewaterlevelinthetankreachestheprobe,theheating

element(s) will turn on.

5.Waterintheheatingtankwillrequireapproximatelyahalfhourbeforereachingoperatingtemperature

(factorysettingof200°F).Whereapplicable,turnontheUniversalControlModule(UCM).Whentheunit

reachesoperatingtemperature,itwilldisplay“READYTOBREW”.

NOTE:Awaterltrationsystemmustbeusedtohelpmaintaintrouble-freeoperation.Air must be

purged from the cartridge prior to connection to equipment.Inareaswithextremelyhardwater,

wehighlyrecommendtheuseofaCurtisapprovedwaterlter.Forourfulllineoflters,pleaselog

on to www.wilburcurtis.com.

SETUP STEPS

1.Theunitshouldbelevel(lefttoright-fronttoback),onasecuresurface.

2.Connectthewaterlinetothewaterinletttingontherearoftheunit.Watervolumeowtothemachine

shouldbeconsistent.Usetubingsizedsufcientlytoprovideaminimumowrateofonegallonperminute.

Product specificaties