Ctek MXS 7.0 Handleiding

Ctek Batterij-oplader MXS 7.0

Lees hieronder de 📖 handleiding in het Nederlandse voor Ctek MXS 7.0 (6 pagina's) in de categorie Batterij-oplader. Deze handleiding was nuttig voor 60 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/6

EN • 3

ABSORPTION, READY TO USE

ANALYSE

RECOND

MODE

12V/7A

MXS 7.0

SUPPLY

NORMAL

AGM

CONGRATULATIONS

to the purchase of your new professional switch mode battery charger.

This charger is included in a series of professional chargers from CTEK AB and SWEDEN

represents the latest technology in battery charging.

CTEK COMFORT CONNECT – eyelet M8

CTEK COMFORT CONNECT

MAINS CABLE

CTEK COMFORT CONNECT – clamp

CHARGE CABLE

SUPPLY PLUG*

*Supply plugs may dif fer to suit your wall socket.

NORMAL

BATTERY

PROGRAM

ERROR LAMP

AGM

BATTERY

PROGRAM

RECOND

PROGRAM

SUPPLY

PROGRAM

POWER

LAMP

CHARGING

1. Connect the charger to the battery.

2. Connect the charger to the wall socket. The power lamp will indicate that the mains

cable is connected to the wall socket. The error lamp will indicate if the battery clamps

are incorrectly connected. The reverse polarity protection will ensure that the battery

or charger will not be damaged.

3. Press the MODE-button to select charging program.

4. Follow the indication lamps through the charging process.

The battery is ready to start the engine when is lit.

The battery is fully charged when is lit.

5. Stop charging at any time by disconnecting the mains cable from the wall socket.

MODE-

BUT TON

MANUAL

DESULPHATION

SOFT START BULK FLOAT, FULLY CHARGED

PULSE, MAINTENANCE CHARGING

20015462E MXS 7.0, Manual EU, Print ﬁle 002.indd 3 2011-10-11 07:58:00

4 • EN

BATTERY SIZE (Ah) TIME TO 80% CHARGED

20Ah 2h

50Ah 6h

100Ah 12h

150Ah 17h

READY TO USE

The table shows the estimated time for empty battery to 80% charge

CHARGING PROGRAMS

Settings are made by pressing the MODE-button. After about two seconds the charger

activates the selected program. The selected program will be restarted next time the

charger is connected.

The table explains the diﬀerent Charging Programs:

Program Battery

Size (Ah) Explanation Temp range

NORMAL 14–225Ah

Normal battery program

14.4V/7A. Use for WET batteries,

Ca/Ca, MF and for most GEL batteries

+5°C–+50°C

(41ºF–122ºF)

AGM

14–225Ah

AGM battery program 14.7V/7A

Use for AGM batteries.

-20°C–+5°C

(-4ºF–41ºF)

RECOND 14–225Ah

Recond program 15.8V/1.5A

Use to return energy to the empty

WET and Ca/Ca batteries. Recond

your battery once per year and after

deep dischare to maximise lifetime and

capacity. The Recond program adds the

Recond step to the normal battery

program. Frequent use of the Recond

program may cause water loss in the

batteries and reduce service life of

electronics. Contact your vehicle and

battery supplier for advice.

-20°C–+50°C

(-4ºF–122ºF)

14–225Ah

Supply program 13.6V/7A

Use as 12V power supply or use for

ﬂoat maintenance charging when 100%

capacity of the battery is required.

Supply program activates Float step

without time or voltage limitation.

-20°C–+50°C

(-4ºF–122ºF)

ERROR LAMP

If the error lamp is lit, check the following:

1. Is the chargers positive lead connected to the

batterys positive pole?

2. Is the charger connected to a 12V battery?

3. The clamps are short circuited?

4. Has charging been interrupted in or ?

Restart the charger by pressing the MODE-button. If charging is

still being interrupted, the battery...

...is seriosly sulphated and may need to be replaced.

...can not accept charge and may need to be replaced.

...can not keep charge and may need to be replaced.

WARNING!

The spark protection on the battery charger

is disabled during SUPPLY program.

20015462E MXS 7.0, Manual EU, Print ﬁle 002.indd 4 2011-10-11 07:58:02

EN • 5

STEP 1 DESULPHATION

Detects sulphated batteries. Pulsing current and voltage, removes sulphate from the lead

plates of the battery restoring the battery capacity.

STEP 2 SOFT START

Tests if the battery can accept charge. This step prevents that charging proceeds with a

defect battery.

STEP 3 BULK

Charging with maximum current until approximately 80% battery capacity.

STEP 4 ABSORPTION

Charging with declining current to maximize up to 100% battery capacity.

STEP 5 ANALYSE

Tests if the battery can hold charge. Batteries that can not hold charge may need to be replaced.

STEP 6 RECOND

Choose the Recond program to add the Recond step to the charging process. During the Recond step

voltage increases to create controlled gasing in the battery. Gasing mixes the battery acid and gives

back energy to the battery.

STEP 7 FLOAT

Maintaining the battery voltage at maximum level by providing a constant voltage charge.

STEP 8 PULSE

Maintaining the battery at 95–100% capacity. The charger monitors the battery voltage and gives a

pulse when necessary to keep the battery fully charged.

VOLTAGE (V)CURRENT (A)

ANALYSE RECOND PULSE

DESULPHATION SOFT START BULK ABSORPTION

14.4V

Increasing voltage

to 14.7V @ 25°C

7A until 12.6V Increasing voltage

to 14.4V @ 25°C

1 7

Limit: Max 20h Max 10h 3 minutes 30 min or 4h

depending on

battery voltage

10 days

Charge cycle restarts

if voltage drops*

Charge cycle restarts

if voltage drops

Max 8h

14.7V

14.4V 7A until 12.6V

7A until 12.6V

Increasing voltage

to 14.4V @ 25°C

14.4V @ 25°C

Declining current

14.7V @ 25°C

Declining current

14.4V @ 25°C

Declining current

Checks if voltage

drops to 12V

Checks if voltage

drops to 12V

Checks if voltage

drops to 12V

Max 13.6V

13.6V

12.9V‒14.4V

7‒2A

12.9V‒14.7V

7‒2A

12.9V‒14.4V

7‒2A

Max 8h

2 3 4 5

FLOAT

6 8

RECOND

SUPPLY

AGM

NORMAL

Max 15.8V

1.5A

CHARGING PROGRAM

*Supply program is not time or voltage limited.

20015462E MXS 7.0, Manual EU, Print ﬁle 002.indd 5 2011-10-11 07:58:03

Product specificaties

Merk:	Ctek
Categorie:	Batterij-oplader
Model:	MXS 7.0
Kleur van het product:	Zwart, zilver
Gewicht:	800 g
Breedte:	89 mm
Diepte:	191 mm
Hoogte:	48 mm
Accu/Batterij voltage:	2 V
Ingangsspanning:	220-240 V
Kleur kabel:	Black, Red
Frequentie:	50/60 Hz
Bedrijfstemperatuur (T-T):	-20 - 50 °C