CTA Digital PAD-PARAPOS Handleiding
Pagina's 1 Niet gecategoriseerd
Bekijk de handleiding van CTA Digital PAD-PARAPOS gratis online of download de PDF. Deze handleiding is 1 keer bekeken. Vraag over dit model? Stel een vraag
3.
1.2.
POS Station with Printer Stand, Magnetic Scanner &
Card Reader Holder w/ Paragon Enclosure
PAD-PARAPOS
INSTRUCTION - MANUAL
CONTENTS:
INSTALLATION:
1. Setting up Enclosure to Body
3. Assembling Arm for Scanner Holder
2. Setting up Magnetic Card Reader Holder
4. Setting up Scanner Holder
1A. Align kiosk body VESA plate holes to Enclosure VESA holes. Then from above,
rotate in screws (I) while holding the hex nuts (J) with your fingers from behind. Rotate
until securely tightened.
2A. Place the magnet side of the card reader holder (L) on the back side of the
enclosure at desired location.
2B. Using the provided tool (G), loosen the screws on the back of the holder to
the match the width of your card reader holder. Once reader is securely in
position in between the edges, tighten the screws on the back until securely
tightened.
3A. Position the scanner holder arm (D) on either the left or right side depending on
preference. Align the holes of the arm with regards to the same two holes on the
kiosk body. Rotate in screws(E) until securely tightened with provided tool(G). Place
the filler component (F) on the side that isn’t using anything as shown above.
4A. With the magnet facing towards the arm, place your scanner holder as shown or
any other preferred position that doesn’t conflict with any other components or
devices.
5. Setting up Device and Enclosure
5A. Lock or unlock your tablet enclosure (K)
with security key as shown
5B. Find the appropriate size foam padding (M) for the
tablet you wish to use. Make sure device is compatible
for the enclosure. Lay in device and connect any
cables/cords as needed.
5C. If needed, lay-in correct included masking insert (M). Close and lock
enclosure afterwards and you’re set
**Tablet shown for
illustration and
NOT INCLUDED.
**Tablet shown for
illustration and
NOT INCLUDED.
**Tablet shown for
illustration and
NOT INCLUDED.
Tilt Adjustability
Tilt front and backwards for preferred angles as needed.
**Tablet shown for
illustration and
NOT INCLUDED.
Static Mount (Optional)
Securely rotate in screws into holes in base for a static
secure station setup
M5 Allen key
M5 x 12
M5 Nut
M5 x 8
Filler
A
B
C
D
E
F
G
H
I
K
L
A
(4) M5 x 12
(4) M5 Nut
I
J
x4
x4
G
L
Foam Adapter &
Sheet Bundle
J
M
K
K
D
E
F
M5 x 8
E
H
K
M
M
(718) 963-9845 www.ctadigital.comsuppo@ctadigital.com36 Taaffe Place Brooklyn, NY 11205(718) 963-9845 www.ctadigital.comsuppo@ctadigital.com36 Taaffe Place Brooklyn, NY 11205
Product specificaties
| Merk: | CTA Digital |
| Categorie: | Niet gecategoriseerd |
| Model: | PAD-PARAPOS |
| Kleur van het product: | Zwart |
| Gewicht: | 3674.1 g |
| Breedte: | 190.5 mm |
| Diepte: | 167.64 mm |
| Hoogte: | 307.34 mm |
| Montagewijze: | Bureau |
| Materiaal: | Staal |
| Aantal per verpakking: | 1 stuk(s) |
| Merkcompatibiliteit: | Universeel |
| Maximale schermgrootte: | 11 " |
| Minimale schermgrootte: | 9 " |
Heb je hulp nodig?
Als je hulp nodig hebt met CTA Digital PAD-PARAPOS stel dan hieronder een vraag en andere gebruikers zullen je antwoorden