CRUX SWRHN-62O Handleiding
Pagina's 7 Niet gecategoriseerd
Bekijk de handleiding van CRUX SWRHN-62O gratis online of download de PDF. Deze handleiding is 0 keer bekeken. Vraag over dit model? Stel een vraag
PRODUCT FEATURES:
- Retains factory features in select Honda vehicles while functioning with an aftermarket radio.
- Pre-programmed to retain factory Steering Wheel Controls.
- Provides navigational outputs: Reverse, Illumination, Parking Brake, & Lanewatch Camera Outputs.
- Retains factory Multi-Angle Rear View Camera & Lanewatch Camera
- Includes antenna adapter, USB retention cable, & subwoofer output cable.
- Includes antenna adapter.
- EIA color coded wiring for easy installation.
PAGE 2 of 7
NOTES:
1. Supports Amplified and Non-Amplified Systems.
2. Does not retain Rear Seat Entertainment system (RSE).
3. On premium trims equipped with both RVC and LaneWatch, the OEM radio outputs these video signals via a GVIF connection.
These signals cannot be retained on the top monitor after radio replacement.
4. The factory 8” upper display i-mid screen is not retained.
5. Type-C updatable firmware.
PARTS INCLUDED:
Module
Harness
Antenna Adapter 12’
SWC Cable
USB Cable
12V Constant [Yellow]
(See page 4) +12V ACC [Red]
Ground [Black]
Parking Brake [Brown/White]
Illumination [Orange]
Amp Turn On [Blue/White]
RVC/LWC Trigger Output [Purple/White]
Right Front (+) [Gray]
Right Front (-) [Gray/Black]
Left Front (+) [White]
Left Front (-) [White/Black]
Right Rear (+) [Violet]
Right Rear (-) [Violet/Black]
Left Rear (+) [Green]
Left Rear (-) [Green/Black]
To retain factory Aux input [Red/White RCA]
LWC/Rear Camera Output [Yellow RCA]
Video Switcher Ground [Black]
**Center Channel [Black RCA]
*Subwoofer [White RCA]
INSTALLATION DIAGRAM FOR VEHICLES:AMPLIFIED
To Factory Harness
16 PIN Black
Connector
JVC / KENWOOD (Blue/Yellow)
To Aftermarket Radio
Cap or insulate if
not being used
Insulate with tape
If not used
3.5MM SWC CABLES
Plug in the 3.5MM SWC cable to
the 4-pin port on the module.
Make a connection between CRUX wiring
harness and Aftermarket radio harness
[BLUE] Power Antenna (12’)
NOTE:
*Connect the white subwoofer RCA jack to the subwoofer output on the aftermarket radio. If the vehicle is equipped with a center channel
speaker (located on the dashboard), connect the red center channel RCA jack to the center channel output of the aftermarket radio.
**Center channel can be connected to one of the front RCA outputs of aftermarket radio. RCA splitter 1M2F will be required to have all speakers working.
TROUBLESHOOTING
- LED MODULE FEEDBACK
- CAN recognized
- Module providing 12V ACC
- Shows that the steering
wheel control (SWC) signal
is being detected module
is functioning well.
LED LIGHT
Solid Red
Solid Blue
Flashing Green
1 2 3 4 5 6
RADIO | Vehicle
Type-C
Aftermarket
Radio Selector
Not Used
24 PIN Connector
24 PIN Latch Connector
20 PIN Connector
To Rear Camera Output
Video Out
32 PIN Connector (see page 5)
8 PIN Connector
Right Front (+)
Right Front (-)
Left Front (+)
Left Front (-)
Right Rear (+)
Right Rear (-)
Left Rear (+)
Left Rear (-)
12V Constant
(See page 4) +12V ACC
Ground
Parking Brake
Illumination
Amp Turn On
RVC/LWC Trigger Output
Right Front (+)
Right Front (-)
Left Front (+)
Left Front (-)
Right Rear (+)
Right Rear (-)
Left Rear (+)
Left Rear (-) ]
To retain factory Aux input
LWC/Rear Camera Output
Video Switcher Ground
**Center Channel
*Subwoofer
Plug in the 3.5MM SWC cable to
the 4-pin port on the module.
Power Antenna (12’)
- CAN recognized
- Module providing 12V ACC
- Shows that the steering
wheel control (SWC) signal
is being detected module
is functioning well.
Solid Red
Solid Blue
Flashing Green
Product specificaties
| Merk: | CRUX |
| Categorie: | Niet gecategoriseerd |
| Model: | SWRHN-62O |
Heb je hulp nodig?
Als je hulp nodig hebt met CRUX SWRHN-62O stel dan hieronder een vraag en andere gebruikers zullen je antwoorden