CRUX SWRHN-62A Handleiding
Pagina's 7 Niet gecategoriseerd
Bekijk de handleiding van CRUX SWRHN-62A gratis online of download de PDF. Deze handleiding is 0 keer bekeken. Vraag over dit model? Stel een vraag
PRODUCT FEATURES:
- Retains factory features in select Honda vehicles while functioning with an aftermarket radio.
- Pre-programmed to retain factory Steering Wheel Controls.
- Provides navigational outputs: Reverse, Illumination, Parking Brake, Vehicle Speed Sense
& Lanewatch Camera Outputs.
- Retains factory Multi-Angle Rear View Camera & Lanewatch Camera
- Includes antenna adapter, USB retention cable, & subwoofer output cable.
- EIA color coded wiring for easy installation.
PAGE 2 of 7
NOTES:
1. Supports both Amplified & Non-amplified vehicles.
2. Does not retain Rear Seat Entertainment system (RSE).
3. Includes Crux Video Switcher to Lanewatch and rear view camera retention.
4. Type-C updatable firmware.
PARTS INCLUDED:
Module
Harness
Antenna Adapter 12’
SWC Cable
USB Cable
INSTALLATION DIAGRAM FOR VEHICLES:AMPLIFIED
To Factory Harness
16 PIN Black
Connector
JVC / KENWOOD (Blue/Yellow)
To Aftermarket Radio
Cap or insulate if
not being used
Insulate with tape
If not used
3.5MM SWC CABLES
Plug in the 3.5MM SWC cable to
the 4-pin port on the module.
Make a connection between CRUX wiring
harness and Aftermarket radio harness
[BLUE] Power Antenna 12’
TROUBLESHOOTING
- LED MODULE FEEDBACK
- CAN recognized
- Module providing 12V ACC
- Shows that the steering
wheel control (SWC) signal
is being detected module
is functioning well.
LED LIGHT
Solid Red
Solid Blue
Flashing Green
1 2 3 4 5 6
RADIO | Vehicle
Type-C
Aftermarket
Radio Selector
Not Used
24 PIN Connector
24 PIN Connector
20 PIN Connector
To Rear Camera Output
Video Out
32 PIN Connector (See page 4)
12V Constant [Yellow]
(See page 4) +12V ACC [Red]
Ground [Black]
VSS [Blue/Yellow]
Parking Brake [Brown/White]
Illumination [Orange]
Amp Turn On [Blue/White]
Reverse Gear [Purple/White]
Right Front (+) [Gray]
Right Front (-) [Gray/Black]
Left Front (+) [White]
Left Front (-) [White/Black]
Right Rear (+) [Violet]
Right Rear (-) [Violet/Black]
Left Rear (+) [Green]
Left Rear (-) [Green/Black]
LWC/Rear Camera Output [Yellow RCA]
[White RCA] Subwoofer Output*
NOTE:
*Connect the white subwoofer RCA jack to the subwoofer output on the aftermarket radio.
-If the aftermarket radio has limited RCA outputs, a 1 male to 2 female (1M2F) RCA splitter may be required.
Right Front (+)
Right Front (-)
Left Front (+)
Left Front (-)
Right Rear (+)
Right Rear (-)
Left Rear (+)
Left Rear (-)
Plug in the 3.5MM SWC cable to
the 4-pin port on the module.
Power Antenna 12’
- CAN recognized
- Module providing 12V ACC
- Shows that the steering
wheel control (SWC) signal
is being detected module
is functioning well.
Solid Red
Solid Blue
Flashing Green
12V Constant
(See page 4) +12V ACC
Ground
VSS
Parking Brake
Illumination
Amp Turn On
Reverse Gear
Right Front (+)
Right Front (-)
Left Front (+)
Left Front (-)
Right Rear (+)
Right Rear (-)
Left Rear (+)
Left Rear (-) ]
LWC/Rear Camera Output
Subwoofer Output
Product specificaties
| Merk: | CRUX |
| Categorie: | Niet gecategoriseerd |
| Model: | SWRHN-62A |
Heb je hulp nodig?
Als je hulp nodig hebt met CRUX SWRHN-62A stel dan hieronder een vraag en andere gebruikers zullen je antwoorden