CRUX SOOGM-22N Handleiding

Bekijk gratis de handleiding van CRUX SOOGM-22N (5 pagina’s), behorend tot de categorie Niet gecategoriseerd. Deze gids werd als nuttig beoordeeld door 7 mensen en kreeg gemiddeld 4.0 sterren uit 2 reviews. Heb je een vraag over CRUX SOOGM-22N of wil je andere gebruikers van dit product iets vragen? Stel een vraag

RADIO REPLACEMENT

SWC RETENTION

+

R

INTERFACING SOLUTIONS

SOOGM-22N

OnStar Radio Replacement Interface with Steering Wheel Control

and CGI Screen Retention (Monochrome & Color)

for select GM LAN Bus Vehicles 2010–2017

PRODUCT FEATURES:

Retains factory features in select GM LAN Bus vehicles while funconing with an aermarket radio.

Retains factory monochrome screen and display buon funconality in select applicaons

Retains backlight for the factory color display and buon funconality

Retains factory OnStar and all warning chime funconality.

Retains RAP(Retained Accessory Power) and is compable with amplified and non-amplified audio systems.

Navigaonal output: Amp-Turn On, Illuminaon, Parking Brake, Reverse gear and VSS.

Retains factory backup camera and the 3.5 Auxiliary input, includes antenna adapter.

NOTE: Do not connect the amplifier turn-on lead from the aermarket radio. The interface supplies the

necessary amplifier acvaon.

PARTS INCLUDED:

SOOGM-22N Module

SOOGM-22N Harness

Harness

INSTALLATION DIAGRAM:

Antenna Adapter

(Included)

TROUBLESHOOTING

AFTERMARKET

RADIO

Reverse Purple/White

Parking Brake Brown/White

TO FACTORY

HARNESS

Cap 3.5 plug or insulate wire

if not being used

3.5MM SWC CABLE

Plug in the 3.5MM SWC cable to the 4-pin port

on the module. See “DIP SWITCH SETTINGS” section.

16-Pin

Connector

8-Pin

Connector

NON

BOSE

BOSE

10-Pin

Connector

Chime Volume

Adjustment

JVC/Kenwood (Blue / Yellow)

44-PIN

CONNECTOR

To Aftermarket

Radio Rear

Camera Input

retain the

3.5 AUX-IN jack

in the console.

To OEM Camera

Harness

Gray 16-Pin

Connector

SWC DIP SWC CGI

1 2 3 4

ON

(Pink)

1 2 3

ON

VR Activation for OnStar &

CGI Button retention (see page 3)

LED

LIGHT

LED MODULE FEEDBACK

Solid blue

CAN recognized

Flashing blue CAN not recognized

Solid red Module providing 12V ACC

Red off 12V ACC OFF

To aftermarket

radio SWC port

or wire

1 of 5

rev.100125

A 91311

.cruxinterfacing.com

Product specificaties