CRUX RVCMB-78V Handleiding

Bekijk gratis de handleiding van CRUX RVCMB-78V (1 pagina’s), behorend tot de categorie Achteruitrijcamera. Deze gids werd als nuttig beoordeeld door 44 mensen en kreeg gemiddeld 5.0 sterren uit 9 reviews. Heb je een vraag over CRUX RVCMB-78V of wil je andere gebruikers van dit product iets vragen? Stel een vraag

MERCEDES BENZ

2016 Metris

2014 – Up Sprinter (W906)

- Acvates the Rear View Camera funcon of the Audio15 radio.

- Mercedes Benz Audio15 Navigaon radio with or without Map Pilot

-78V OBD Coder MB

FAK-RCAF

Connect the video RCA of the aermarket rear-view camera to the female RCA connector of the FAK-RCAF cable.

Connect the Fakra plug of the FAK-RCAF cable the green Fakra socket of the Audio15 radio. to

1.Locate OBD-port and remove cover (commonly located under the dashboard on the driver side).

2.Turn ignion switch to ACC.

3.Turn on radio and wait unl the navigaon has booted.

4.Plug coder into OBD-port.

5.Leave the MB-78V coder plugged in the OBD port for about 30 seconds.

6.When the navigaon startup-screen shows, remove coder from OBD-port.

NOTE: If the radio does not power up aer 2 minutes, turn the key OFF, remove the key, open door and close

and wait another 2 minutes or unl the car has powered down. Insert the key and turn to the ON posion, the

radio and RVC should now work. Disconnect the OBDII coder and have the customer keep it in a safe place.

7.Your radio’s rear view camera feature is now enabled.

To remove the Rear--6. Aer the rst use on a View camera feature from the navigaon’s menu repeat steps 1

vehicle, the RVCMB-78V coder is personalized to this vehicle. On this vehicle the enabling and removing of the

Rear-View camera feature can be repeated without limit.

1

2

FAK-RCAF

1

rev.050417

Product specificaties