CRUX RVCGM-80C Handleiding
CRUX
Niet gecategoriseerd
RVCGM-80C
Bekijk gratis de handleiding van CRUX RVCGM-80C (8 pagina’s), behorend tot de categorie Niet gecategoriseerd. Deze gids werd als nuttig beoordeeld door 24 mensen en kreeg gemiddeld 4.9 sterren uit 12.5 reviews. Heb je een vraag over CRUX RVCGM-80C of wil je andere gebruikers van dit product iets vragen? Stel een vraag
Pagina 1/8
RVCGM-80C
Rear View Integration Interface for Select
GM Vehicles with CUE, Intellilink and MyLink Systems
R
INTERFACING SOLUTIONS
Sightline
Multi View Integration
Crux Interfacing Solutions • 6860 Canby Ave., Suite 116, Reseda, CA 91335
phone: (818) 609-9299 • fax: (818) 996-8188 • www.cruxinterfacing.com
rev.082718
1 of 8
- Automacally switches to rear-view when vehicle is put in reverse gear.
- Provides reverse camera input.
- Adds 3 Audio/Video inputs.
- Plug and play installaon.
PRODUCT FEATURES:
PARTS INCLUDED:
RVCGM-80C
Module
Remote Control Power Harness
IR Extension Cable LVDS Cable A/V Cable
Camera Power Harness Push Buon Switch
Crux Interfacing Solutions • 6860 Canby Ave., Suite 116, Reseda, CA 91335
phone: (818) 609-9299 • fax: (818) 996-8188 • www.cruxinterfacing.com
rev.082718
2 of 8
R
INTERFACING SOLUTIONS
Sightline
Multi View Integration
RVCGM-80C
Rear View Integration Interface for Select
GM Vehicles with CUE, Intellilink and MyLink Systems
INSTALLATION DIAGRAM:
AV1
AV2
LVDS
Output
AV3
AV OUT
+12V ACC
GROUND
Fuse Box
Connect to Blue
Mini USB Plug from
HMI Module
Plug to HMI
Module
RGB CABLE
IR REMOTE CABLE
PUSH BUTTON SWITCH
CAMERA POWER
+12V GROUND
DIP SWITCHES
Sig tli e
REAR-VIEW INTEGRATION
RVCGM-80C
24-PIN
POWER PLUGSTATUS LED
24-Pin
Audio/Video
IN/OUT
GM-80C LVDS
T-HARNESS
Crux Interfacing Solutions • 6860 Canby Ave., Suite 116, Reseda, CA 91335
phone: (818) 609-9299 • fax: (818) 996-8188 • www.cruxinterfacing.com
rev.082718
3 of 8
R
INTERFACING SOLUTIONS
Sightline
Multi View Integration
RVCGM-80C
Follow these steps to properly install the interface module. Note that this interface connects to the HMI Module.
Rear View Integration Interface for Select
GM Vehicles with CUE, Intellilink and MyLink Systems
INSTALLATION INSTRUCTIONS:
1. Remove the GLOVE BOX to gain access to the factory HMI module. The HMI module is located in dierent areas
depending on the vehicle model. Below is a list of vehicles and where the HMI module can be located:
Cadillac ATS/CTS = below the glove box
Cadillac SRX = below or behind the glove box
Corvee = driver side kick panel
Once you have located the HMI module, unplug the BLUE LVDS connector. You will need to plug this to the
RVCGM-80C Main Interface Module.
Factory LVDS
Connector
2. Using the provided 24-Pin Power Harness, connect the loose wires on the 24-Pin as menoned below. You can
tap Accessory power from the cigaree lighter (+12V switched) posion.
NOT ALL LOOSE WIRES ON THE
24-PIN CONNECTOR ARE USED Factory Mini USB (LVDS)
connecons are mostly
located on the MyLink
System box.
RED = Accessory
BLACK = Ground
BLUE = Parking
GRAY = Reverse Input
3. Aer making the connecons on the 24-Pin harness, insert the 24-Pin into the Main Interface module. Make
sure that the connector is properly seated into the module.
Product specificaties
| Merk: | CRUX |
| Categorie: | Niet gecategoriseerd |
| Model: | RVCGM-80C |
Heb je hulp nodig?
Als je hulp nodig hebt met CRUX RVCGM-80C stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Niet gecategoriseerd CRUX
10 Maart 2025
10 Maart 2025
10 Maart 2025
10 Maart 2025
9 Maart 2025
9 Maart 2025
9 Maart 2025
9 Maart 2025
9 Maart 2025
9 Maart 2025
Handleiding Niet gecategoriseerd
- Kernau
- ISi
- Garden Place
- Venom
- Ergotools Pattfield
- Laser
- Vileda
- Autotek
- Stages
- Emeril Lagasse
- Vonroc
- CyberPower
- PCTV Systems
- Nowsonic
- ProUser
Nieuwste handleidingen voor Niet gecategoriseerd
17 Juni 2025
17 Juni 2025
17 Juni 2025
17 Juni 2025
17 Juni 2025
17 Juni 2025
17 Juni 2025
17 Juni 2025
17 Juni 2025
17 Juni 2025