CRUX CS-BMW6 Handleiding

Bekijk gratis de handleiding van CRUX CS-BMW6 (12 pagina’s), behorend tot de categorie Achteruitrijcamera. Deze gids werd als nuttig beoordeeld door 29 mensen en kreeg gemiddeld 4.9 sterren uit 9 reviews. Heb je een vraag over CRUX CS-BMW6 of wil je andere gebruikers van dit product iets vragen? Stel een vraag

•With OE type Dynamic Parking Guide Lines

•On-screen display and setup

•2 trigger outputs (+12V max. 1A), separately adjustable switching events (CAN, ACC,

rear-view camera, reverse gear)

•Rear-view camera input

•Front camera input

•Front camera input can also be used as an Auxiliary Video Input

•Automatic switching to rear-view camera input on engagement of reverse gear from all

operation modes

•Forced rear-view camera option (only on vehicles with PDC button)

•Manual return from rear-view and front camera (cancellation of automatic switching)

•Picture-in-picture mode combining after-market rear-view and front camera picture(s)

with factory parking sensor graphics

•Compatible wi all factory video accessories (e.g. rear-view camera, DVD-changer, etc.) th

•Plug & Play installation

•For the F-series BMW with NBT navigation system or radio, 6.5”, 7”, 8.8” or 10.25”

monitor and 4+2pin HSD2 LVDS connector.

•On i3 installations, part# HAR-i3 is required to install the interface. The interface module

is installed/mounted under the rear seat and you will need to run the HAR-i3 towards

the rear seat.

CS-BMW6 Module

CS-BMW6 Harness

4+2 PIN HSD2 LVDS Cable

Power/CAN Harness

1 / 12

rev.060519

Product specificaties