Crestron Saros Sound Bar 200 Handleiding

Bekijk gratis de handleiding van Crestron Saros Sound Bar 200 (2 pagina’s), behorend tot de categorie Soundbar. Deze gids werd als nuttig beoordeeld door 26 mensen en kreeg gemiddeld 4.7 sterren uit 8 reviews. Heb je een vraag over Crestron Saros Sound Bar 200 of wil je andere gebruikers van dit product iets vragen? Stel een vraag

SAROS SB-200-P

Saros

®

Sound Bar 200, Powered

crestron.com

|

800.237.2041

>High-quality, full-range amplified

stereo sound bar

>Delivers enhanced sound quality

and performance for use with any

flat panel display

>Mounts to a wall or sits on a shelf

>Balanced or unbalanced stereo

line-level audio input

[1]

>Unbalanced stereo audio cable included

>Powers on and off automatically

>100 to 240 Volt AC powered

The Saros

®

SB-200-P is a stereo sound bar designed to provide

enhanced audio performance for a flat panel display. Its full-range, front-

firing speakers offer an improvement over the small, rear-facing speakers

typical of many display devices. The bracket included with the sound bar

allows for attachment to a wall surface, or the unit can be placed on a

shelf below or above the display.

Built-in amplification allows for direct connection to the line-level audio

output of the display device, or to the output of an audio preamp, switcher,

mixer, tv tuner, codec, or Crestron DM

®

receiver.

[1]

The amplifier powers on

automatically when an audio input signal is detected, and powers off if no

signal is detected for several minutes.

The SAROS SB-200-P sound bar is ideally suited for use with the

Crestron RL

®

2 Group Collaboration System and other unified

communication and videoconferencing systems. It is equally well-suited

for use in any small to medium sized room or public space in a hotel,

restaurant, museum, medical center, airport, office building, or residence.

SPECIFICATIONS

Features & Performance

Woofers: (2) 3 inch (76 mm) polypropylene cone w/rubber surround

Passive Radiator: (2) 3 x 4-3/8 inch (76 x 112 mm) polypropylene cone

w/rubber surround

Tweeters: (2) 1 inch (25 mm) polyester dome

Amplifier Power: 20 Watts per channel, stereo

Frequency Response: 100 Hz to 20 kHz (±3 dB)

Output Sensitivity: 83 dB SPL @ 1 meter, both channels driven @ 1 Watt

Input Sensitivity: 0.75 Vrms per channel for full rated output

Go To Sleep Time: 20 minutes (±5 minutes) with no signal present

Wake Threshold: 5 mV (±2 mV) typical

Connections

BALANCED AUDIO INPUTS: (1) 5-pin 3.5 mm detachable terminal block;

Balanced stereo line-level audio input

[1]

;

Maximum Input Level: 0.85 Vrms;

Input Impedance: 10k Ohms

UNBALANCED AUDIO INPUTS: (2) RCA connectors, female;

Unbalanced stereo line-level audio input

[1]

;

Maximum Input Level: 0.85 Vrms;

Input Impedance: 10k Ohms;

NOTE: Right-angle plugs may be required for wall mount applications. A

59 inch (150 cm) right-angle RCA to straight RCA stereo cable is included.

100-240V~50/60Hz 50W: (1) IEC 60320 C8 main power inlet;

Mates with removable power cord, included

Controls & Indicators

100-240V~50/60Hz 50W: (1) Rocker switch, turns main power on or off

PWR: (1) Blue LED, indicates the main power switch is turned on

Power Requirements

Main Power: 50 Watts (500 mA maximum) @ 100-240 Volts AC, 50/60 Hz

Environmental

Temperature: 41° to 104° F (5° to 40° C)

Humidity: 10% to 90% RH (non-condensing)

Product specificaties