Crestron HZA-CONV-THSTAT-2WIRE Handleiding

Crestron Thermostaat HZA-CONV-THSTAT-2WIRE

Lees hieronder de đź“– handleiding in het Nederlandse voor Crestron HZA-CONV-THSTAT-2WIRE (5 pagina's) in de categorie Thermostaat. Deze handleiding was nuttig voor 22 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/5
The Crestron® HZA-CONV-THSTAT-2WIRE is an adapter for the
Horizon® Wireless Thermostat (sold separately) that HZ-THSTAT
eliminates the need to add a common wire in retrofit applications. The
adapter allows the HZ-THSTAT to power itself and perform an HVAC
call, with as few as two wires, without stealing power from the HVAC
call relay connections. The adapter can also be used to add an additional
wire for a system upgrade if a common wire is already present.
The HZA-CONV-THSTAT-2WIRE is installed near the HVAC equipment
and can be mounted with either mounting screws (included) or double-
sided tape (included). HZA-CONV-THSTAT-2WIRE
HZA-CONV-THSTAT-2WIRE
HZA-CONV-THSTAT-2WIRE
HZA-CONV-THSTAT-2WIREHZA-CONV-THSTAT-2WIRE
In the
In the
In the
In the In the Box
Box
Box
BoxBox
1HZA-CONV-THSTAT-2WIRE, Common Wire Adapter for
HZ-THSTAT
 
Additional Items
Additional Items
Additional Items
Additional Items Additional Items
2 Screw, 6-20 BSD, #2 PT, Self Drill, 1/2 in. Hex, Steel
(2056229)
2 Tape, 1.5 in. x 0.75 in., Double Sided (2048130)
HZA-CONV-THSTAT-2WIRE
HZA-CONV-THSTAT-2WIRE
HZA-CONV-THSTAT-2WIRE
HZA-CONV-THSTAT-2WIREHZA-CONV-THSTAT-2WIRE QuickStart
Common
Common
Common
CommonCommon Wire
Wire
Wire
WireWireAdapter
Adapter
Adapter
AdapterAdapter for
for
for
forforHZ-THSTAT
HZ-THSTAT
HZ-THSTAT
HZ-THSTATHZ-THSTAT
1
1
1
11
Install the
Install the
Install the
Install the Install the Device
Device
Device
DeviceDevice
Install the HZA-CONV-THSTAT-2WIRE near the HVAC equipment. It can
be mounted to most flat surfaces with self-drill mounting screws
(included) or double-sided tape (included).
Mounting with
Mounting with
Mounting with
Mounting with Mounting with Double-Sided Tape
Double-Sided Tape
Double-Sided Tape
Double-Sided Tape Double-Sided Tape
Two pieces of double-sided tape are provided. The illustration below
depicts the recommended placement for the double-sided tape on the
HZA-CONV-THSTAT-2WIRE. Make sure the HZA-CONV-THSTAT-2WIRE
and the mounting surface are both clean before attaching the tape.
Mounting with
Mounting with
Mounting with
Mounting with Mounting with Included Screws
Included Screws
Included Screws
Included ScrewsIncluded Screws
Before mounting the HZA-CONV-THSTAT-2WIRE, prepare the
mounting surface. A power drill is required for the installation.
1. Place the HZA-CONV-THSTAT-2WIRE on the mounting surface.
2. Make a center mark through both of the HZA-CONV-THSTAT-2WIRE
mounting holes.
3. Partially screw one of the included screws to the mounting surface.
4. Align the HZA-CONV-THSTAT-2WIRE with the screw, and continue
tightening the screw.
2
2
2
22
HZA-CONV-THSTAT-2WIRE
HZA-CONV-THSTAT-2WIRE
HZA-CONV-THSTAT-2WIRE
HZA-CONV-THSTAT-2WIREHZA-CONV-THSTAT-2WIRE QuickStart
Common
Common
Common
CommonCommon Wire
Wire
Wire
WireWire Adapter
Adapter
Adapter
AdapterAdapter for
for
for
forfor HZ-THSTAT
HZ-THSTAT
HZ-THSTAT
HZ-THSTATHZ-THSTAT
5. With one side fastened, use the second included screw to secure the
other side of the HZA-CONV-THSTAT-2WIRE to the mounting
surface. Wire the
Wire the
Wire the
Wire the Wire the Device
Device
Device
DeviceDevice
Turn the HVAC system power off, and make the necessary connections
as called out in the illustrations that follow. Apply power after all
connections have been made.
NOTES:
NOTES:
NOTES:
NOTES:NOTES:
 Always wire the HZA-CONV-THSTAT-2WIRE to the R/RC and C lconnections on the HZ-THSTAT.
Keep the R CONNECTIONS switch set to R/RC ONLY.
 The W/Y connection on the HZA-CONV-THSTAT-2WIRE always lreplaces the Y connection when there is a Y connection for the
system type selected.
For Heat only systems, the W/Y connection will replace the W
connection.
For Radiant Floor only systems, the W/Y connection will replace the
W2 connection.
3
3
3
33
HZA-CONV-THSTAT-2WIRE
HZA-CONV-THSTAT-2WIRE
HZA-CONV-THSTAT-2WIRE
HZA-CONV-THSTAT-2WIREHZA-CONV-THSTAT-2WIRE QuickStart
Common
Common
Common
CommonCommon Wire
Wire
Wire
WireWireAdapter
Adapter
Adapter
AdapterAdapter for
for
for
forforHZ-THSTAT
HZ-THSTAT
HZ-THSTAT
HZ-THSTATHZ-THSTAT

Product specificaties

Merk: Crestron
Categorie: Thermostaat
Model: HZA-CONV-THSTAT-2WIRE

Heb je hulp nodig?

Als je hulp nodig hebt met Crestron HZA-CONV-THSTAT-2WIRE stel dan hieronder een vraag en andere gebruikers zullen je antwoorden


Handleiding Thermostaat Crestron

Crestron

Crestron HZA-CONV-THSTAT-2WIRE Handleiding

8 Juli 2023
Crestron

Crestron CHV-RTS Handleiding

7 Juli 2023
Crestron

Crestron DIN-THSTAT Handleiding

5 Juli 2023
Crestron

Crestron CHV-TSTAT-FCU-PIR-10 Handleiding

5 Juli 2023
Crestron

Crestron CHV-TSTATEX Handleiding

4 Juli 2023
Crestron

Crestron DIN-1TSTAT8 Handleiding

4 Juli 2023
Crestron

Crestron CHV-TSTAT-FCU Handleiding

3 Juli 2023
Crestron

Crestron DIN-TSTAT-FCU Handleiding

2 Juli 2023

Handleiding Thermostaat

Nieuwste handleidingen voor Thermostaat

Otio

Otio 840225 Handleiding

20 April 2024
Rose LM

Rose LM STH-FH100 Handleiding

16 April 2024
EMOS

EMOS P5640S Handleiding

13 April 2024
Siemens

Siemens Landis & Staefa REV22RF Handleiding

8 April 2024
Tylö

Tylö CC300 Handleiding

20 Maart 2024
Tylö

Tylö CC200 Handleiding

20 Maart 2024
Tylö

Tylö CC300T Handleiding

20 Maart 2024
Siemens

Siemens RDG160T Handleiding

17 Maart 2024
Nobo

Nobo NTB-2T Handleiding

14 Maart 2024
Elektrobock

Elektrobock BT730 Handleiding

12 Maart 2024