Crestron CAEN-CK-4x2 Handleiding

Bekijk gratis de handleiding van Crestron CAEN-CK-4x2 (2 pagina’s), behorend tot de categorie Niet gecategoriseerd. Deze gids werd als nuttig beoordeeld door 34 mensen en kreeg gemiddeld 4.8 sterren uit 6 reviews. Heb je een vraag over Crestron CAEN-CK-4x2 of wil je andere gebruikers van dit product iets vragen? Stel een vraag

CAEN-CK-2x1, 4x1, 4x2

Functional Summary Installation

The cover extension kit should be attached to a Crestron

®

Automation Enclosure in accordance with all national and

local electrical codes. The enclosure cover and screws

must be removed prior to installation. Both must be

retained and used with the supplied screws to complete

the following procedure.

The CAEN-CK-2x1/4x1/4x2 CAEN Cover Extension

Kits are designed to increase the overall depth of the

CAEN-2x1, CAEN-4x1, and CAEN-4x2 automation

enclosures by 1.5 inches. Adding depth to these

enclosures allows the enclosure to accommodate excess

wiring and third-party devices that may not normally fit in

the standard enclosure.

Refer to the following procedure shown in the installation

diagram when installing the CAEN Cover Extension Kit.

CAEN-CK Overall Dimensions (Front and Side Views)

W

H

D

HORIZONTAL

PAN (x2)

VERTICAL

BRACKET (x2)

Installation Diagram

1. As shown in the installation diagram, place a

horizontal pan on the bottom and top of the CAEN

enclosure (edges facing inward). Use a #2 Phillips

tip screwdriver to secure the horizontal pans to the

enclosure using the 8-32 screws.

2. As shown in the installation diagram, place a vertical

bracket on the left and right side of the CAEN

enclosure (edges facing outward). Use a #2 Phillips

tip screwdriver and the 8-32 screws to loosely attach

the vertical brackets to the enclosure.

The following table lists the dimensions (assembled) for

the CAEN-CK-2x1, CAEN-CK-4x1, and CAEN-CK-4x2.

Dimensions of Enclosure Cover Kits

3. Secure the vertical brackets to the secured horizontal

pans with a #2 Phillips tip screwdriver and the 8-32

screws. Tighten the screws holding the vertical

brackets to the CAEN enclosure.

DIMENSION CAEN-

CK-2x1

CAEN-

CK-4x1

CAEN-

CK-4x2

H 23.50 in 38.90 in 38.90 in

D 1.50 in 1.50 in 1.50 in

W 15.35 in 15.35 in 26.50 in

4. After installing the required devices, use the

remaining screws to install the CAEN cover.

Crestron Electronics, Inc.

Installation Guide – DOC. 6336

15 Volvo Drive Rockleigh, NJ 0764712.04

Tel: 888.CRESTRON

Fax: 201.767.7576Specifications subject to

www.crestron.comchange without notice.

Product specificaties