Crestron CAEN-CK-2X1 Handleiding

Bekijk gratis de handleiding van Crestron CAEN-CK-2X1 (2 pagina’s), behorend tot de categorie Niet gecategoriseerd. Deze gids werd als nuttig beoordeeld door 14 mensen en kreeg gemiddeld 4.5 sterren uit 6 reviews. Heb je een vraag over Crestron CAEN-CK-2X1 of wil je andere gebruikers van dit product iets vragen? Stel een vraag

CAEN-CK-7x1, 7x2

Functional Summary

The CAEN-CK-7x1 & 7x2 CAEN Cover Extension Kits

are designed to increase the overall depth of the CAEN-

7x1 and CAEN-7x2 automation enclosures by 1.5 inches.

Adding depth to these enclosures allows the enclosure to

accommodate excess wiring and third-party devices that

may not normally fit in the standard enclosure.

CAEN-CK Overall Dimensions (Front and Side Views)

HORIZONTAL

PAN (x2)

W

D

H

VERTICAL

BRACKET (x4)

The following table lists the dimensions for the

CAEN-CK-7x1 and CAEN-CK-7x2.

Dimensions of Enclosure Cover Kits

DIMENSION CAEN-CK-7x1 CAEN-CK-7x2

H 62.00 in 62.00 in

D 1.50 in 1.50 in

W 15.35 in 26.50 in

Installation

The cover extension kit should be attached to a Crestron

®

Automation Enclosure in accordance with all national and

local electrical codes. The enclosure cover and screws

must be removed prior to installation. Both must be

retained and used with the supplied screws to complete

the following procedure.

Refer to the following procedure shown in the installation

diagram when installing the CAEN Cover Extension Kit.

Installation Diagram

1. As shown in the installation diagram, place a

horizontal pan on the bottom and top of the CAEN

enclosure (edges facing inward). Use a #2 Phillips

tip screwdriver to secure the horizontal pans to the

enclosure using the 8-32 screws.

Crestron Electronics, Inc.Installation Guide – DOC. 6337

15 Volvo Drive Rockleigh, NJ 0764712.04

Tel: 888.CRESTRON

Fax: 201.767.7576Specifications subject to

www.crestron.comchange without notice.

Product specificaties