Cotech K-NCF-LN10W Handleiding

Bekijk gratis de handleiding van Cotech K-NCF-LN10W (5 pagina’s), behorend tot de categorie Niet gecategoriseerd. Deze gids werd als nuttig beoordeeld door 13 mensen en kreeg gemiddeld 4.0 sterren uit 8 reviews. Heb je een vraag over Cotech K-NCF-LN10W of wil je andere gebruikers van dit product iets vragen? Stel een vraag

UNITED KINGDOM • CUSTOMER SERVICE

tel 020 8247 9300 e-mail [email protected] internet www.clasohlson.co.uk postal 10 – 13 Market Place, Kingston Upon Thames, Surrey, KT1 1JZ

Ver. 20181101

LED Ceiling Light

Art.no 36-7306-1 Model K-NCF-LN10W

36-7306-2 K-NCF-LN20W

Please read theentire instruction manual before use and

then save it for future reference. Wereserve theright for any

errors in text or images and any necessary changes made

to technicaldata. Intheevent of technical problems or other

queries, please contact our Customer Services.

Safety

The light source of this luminaire is not replaceable: when the

light source reaches its end of life the whole luminaire shall be

replaced.

2. Open theendpiece.

3. Remove theend

piece and take off

theplasticcover.

Responsible disposal

Thelight fitting is Class 1 rated and must therefore be

earthed.

The light source is not suitable for use with a dimmer.

Warning:

• This light fitting is only suitable for permanent installation

and should be installed by aqualified electrician.

• Thelight fitting should be mounted out of thereach.

• Ensure proper footing and balance at all times during

installation.

• Whenever installing any electrical products, basic

safety precautions should always be observed to avoid

therisk of fire, electric shock and personal injury.

Installation

Warning:

1. Before beginning any electrical installation

always disconnect thepower to thecircuit

you are working on, either by turning off

themain circuit breaker or by removing

thefuse from theconsumerunit.

4. Using thelight fitting as atemplate mark out where you

may need to drill/screw.

Warning: Make sure that thewall has no concealed

electrical wiring, gas or water pipes before drilling/

screwing. Useanappropriate fastening method for

thesurface in question.

5. Make ahole in one of thesilicone plugs in theendpiece.

Pullthesupply cable through and connect it to

theterminalblock.

6. Turn thepoweron.

Use thesame installation procedures described above to

connect several light fittings in series (36-7306-1 Max 10, and

36-7306-2 Max 5).

This symbol indicates that this product

should not be disposed of with general

householdwaste. Thisapplies throughout

theentire EU. Inorder to prevent any harm to

theenvironment or health hazards caused by

incorrect waste disposal, theproduct must

be handed in for recycling so that thematerial

can be disposed of in aresponsible manner.

Whenrecycling theproduct, take it to your

local collection facility or contact theplace of

purchase. Theywill ensure that theproduct is

disposed of in anenvironmentally sound manner.

Specifications

36-7306-1

Rated voltage 220–240 V AC, 50/60Hz

Light source LED 13 W

Colour temperature 3000 K

Colour rendition (Ra) > 80

Luminous flux 1000lm

Beamangle 110°

IP rating IP21

Size 600×165×66mm

36-7306-2

Rated voltage 220–240 V AC, 50/60Hz

Light source LED 24 W

Colour temperature 3000 K

Colour rendition (Ra) > 80

Luminous flux 1800lm

Beamangle 110°

IP rating IP21

Size 1200×165×66mm

Product specificaties