Cotech HD2200 Handleiding

Bekijk gratis de handleiding van Cotech HD2200 (5 pagina’s), behorend tot de categorie Dimmer. Deze gids werd als nuttig beoordeeld door 80 mensen en kreeg gemiddeld 4.2 sterren uit 4 reviews. Heb je een vraag over Cotech HD2200 of wil je andere gebruikers van dit product iets vragen? Stel een vraag

GREAT BRITAINCUSTOMER SERVICE•

tel020 8247 9300 customerservice@clasohlson.co.uk www.clasohlson.co.uk 10 – 13 Market Place, Kingston Upon Thames, Surrey, KT1 1JZe-mailinternet postal

Ver. 20170614

Wall Box Dimmer Module

Art.no 36-6592 Model Hytronik HD2200

Please read theentire instruction manual before using

theproduct and then save it for future reference.

Wereserve theright for any errors in text or images

and any necessary changes made to technicaldata.

Intheevent of technical problems or other queries,

please contact our Customer Services.

Installation

Note:

• This product must only be installed by aqualified

electrician.

• Push-button switch spring sold separately.

Wiring diagram

• If theconnected light was switched on when

thepower was cut, thelight will come back on at

thesame light level as before.

• If theconnected light was switched off when

thepower was cut, thelight will remain off when

thepower is restored.

Responsible disposal

This symbol indicates that this product

should not be disposed of with general

householdwaste. Thisapplies throughout

theentire EU. Inorder to prevent any harm

to theenvironment or health hazards caused

by incorrect waste disposal, theproduct

must be handed in for recycling so that

thematerial can be disposed of in aresponsible

manner. Whenrecycling your product, take it to your

local collection facility or contact theplace of purchase.

Theywill ensure that theproduct is disposed of in

anenvironmentally sound manner.

Specifications

Rated voltage 230V AC, 50/60 Hz

Load halogen/LED 1–200W/1–150W

Power factor ≥ 0.97

Operating temperature −20 to 45 °C

Fuse Automaticreset

Overheating protection Automaticreset

IP rating IP20

Size (mm)

Installation with aspring-

loaded on/off switch

Thanks to their built-in synchronisation feature, multiple

(up to 50) wall box dimmers can be controlled by thesame

spring-loaded on/off switch without theneed for separate

synchronisation between thewall box dimmers.

Synchronisation

1. Press and hold in theon/off switch for at least

1second and then release it, then quick-press (for

less than 1 second) theswitchagain. Alldimmer

modules will be switchedoff.

2. Press in theswitch again, hold in for at least

1second and then release. Theswitch modules will

now be synchronised.

Potentiometer

Installation with multiple

dimmers and spring-loaded

on/off switch

Potentiometer for adjusting

thelowest dimmer level

depending on theload.

Operating instructions

• Switch light on/off: quick-press theswitch. Thelight

will come on with thesame intensity as when it was

lastused.

• Stepless dimming: hold theswitchin. Everytime

theswitch is held in, thedimmer changes function

and alternates between raising and lowering

thelightlevel.

Memory

Thedimmer remembers thelatest dimmer level setting

after aloss of power (power cut or blown fuse):

Product specificaties