Cotech 1004P Handleiding

Bekijk gratis de handleiding van Cotech 1004P (5 pagina’s), behorend tot de categorie Dimmer. Deze gids werd als nuttig beoordeeld door 11 mensen en kreeg gemiddeld 4.7 sterren uit 3 reviews. Heb je een vraag over Cotech 1004P of wil je andere gebruikers van dit product iets vragen? Stel een vraag

English

UNITED KINGDOM

customer servicetel 020 8247 9300 e-mail [email protected]

internet www.clasohlson.co.uk postal 10 – 13 Market Place, Kingston upon Thames, Surrey, KT1 1JZ

Ver. 20180905

Universal In-Line Dimmer Switch

Art.no 36-6440 Model 1004P

Please read theentire instruction manual before using theproduct and

then save it for future reference. We reserve theright for any errors in

text or images and any necessary changes made to technical data.

If you have any questions concerning technical problems please

contact our Customer Services.

Safety

Any electrical work on existing electrical installations must be performed

by acompetent person in compliance with current wiring regulations.

New electrical installations should only be performed by anauthorised

electrician.

Product description

This in-line dimmer switch is suitable for use with 10–150 W incandescent

and halogen lights, 11–75 W CFL lights or 4–25 W LED lights.

Installation

Warning: Unplug thecable before installing thedimmer switch.

1. Undo thescrews (A).

2. Remove thecover (B) and thepush-button (C).

3. Undo thescrews (D) holding thecable strain relief (E).

4. Cut theelectric cable where you want to install thedimmer switch

and strip theinsulation off theends of theelectric cable and

thetwo wires inside (see fig.).

5. Connect thewires on thepower-in (wall socket) side of theelectric

cable to theL and N screw terminals on thecircuit board (F).

Tighten thescrews of thestrain relief to hold thecable in place

(thestrain relief is reversible to fit different types of cable).

6. Connect thewires on thepower-out side of theswitch to

and N.

Tighten thestrain relief (E).

7. Place thepush-button (C) into thecover (B). Make sure that

thepush-button is sitting correctly in its slot and then fasten

theswitch housing together using thetwo screws (A).

Alist of suitable types of cable:

Operating instructions

On/off press thepush-button (C) quickly (less than one second).

Min/max hold in thepush-button to dim thelight level from light

to dark. Hold thebutton in again to reverse theeffect and increase

thelight.

Thedimmer switch memorises thelatest setting. Thememory is saved

even if theswitch is unplugged.

Note: Electricity will still pass through theswitch even when thedial is

set to Min.

Care and maintenance

Unplug themains lead before cleaning theproduct.

Clean theproduct using asoft, damp cloth. Use amild detergent.

Never use solvents or strong, abrasive cleaning agents.

Responsible disposal

This symbol indicates that this product should not be

disposed of with general household waste. This applies

throughout theentire EU. In order to prevent any

harm to theenvironment or health hazards caused by

incorrect waste disposal, theproduct must be handed

in for recycling so that thematerial can be disposed

of in aresponsible manner. When recycling your

product, take it to your local collection facility or contact

theplace of purchase. They will ensure that theproduct

is disposed of in anenvironmentally sound manner.

Specifications

IP rating IP20

Min/max load10–150 W (incandescent bulbs)

11–75 W CFL (max 4 bulbs)

4–25W LED (max 4 bulbs)

ART. 1004P

H03VVH2-F 2×0.75 mm

2

H03VV-F 2×0.75 mm

2

H03V2V2H2-F 2×0.75 mm

2

H03V2V2-F 2×0.75 mm

2

H03Z1Z1H2/F 2×0.75 mm

2

A

D

B

C

F

E

220–240 V AC 50−60 Hz

Product specificaties