Cotech EMP200P Handleiding

Bekijk gratis de handleiding van Cotech EMP200P (4 pagina’s), behorend tot de categorie Niet gecategoriseerd. Deze gids werd als nuttig beoordeeld door 13 mensen en kreeg gemiddeld 4.7 sterren uit 4 reviews. Heb je een vraag over Cotech EMP200P of wil je andere gebruikers van dit product iets vragen? Stel een vraag

GREAT BRITAIN

For consumer contact, please visit www.clasohlson.

co.uk and click on customer service.

ENGLISH

Ver. 200802

“SAFE BOY” Residual Current Device for outdoor use

Art.no: 18-2033 Model: EMP200P-UK

32-8602 EMP200P

Works with different kinds of electrical devices such as

electrical tools, washing machines, and boilers.

If there is an imbalance in the circuit current such as a leakage to earth the RCD auto-

matically disconnects the current, thereby protecting the appliance and the operator

from dangerous electrical shocks.

Connection

Connect the residual current device between the load and the wall socket (main power).

3G 1.5 mm2 exible cable should be used. The residual current device also cuts the

power if over-current would occur.

Function test

(1) Push the TEST button, the residual current device automatically cuts the power.

The indicator is off.

(2) Push the RESET button, the residual current device is in use. The indicator is red.

Note!

If the indicator is off, the residual current device has cut the power (an imbalance in the

current between the phase and neutral conductors has occurred or the residual current

device is in TEST mode).

Warning!

1. Perform a function test (see above) every time the residual current device is to be

used. Contact the manufacturer if the residual current device shuts off repeatedly

when connected to a load, or if it does not shut off when tested (see above).

2. Remember that use of a residual current device is only a safety precaution. Handling

electrical equipment improperly is potentially lethal. The use of the residual current

device should not be seen as a substitute for basic electric safety.

3. Make sure that the plugs are pointed down according to the label.

Technical Data

Max. power: 230 V~, 50Hz, 3680 W

Trip current: 30 mA

Trip time: <30 ms

Operating temperature range: -25°C~40°C

Protection class: IP 44

Product specificaties