Cobra JumPack Mini CPP 8500 Handleiding

Cobra Niet gecategoriseerd JumPack Mini CPP 8500

Lees hieronder de 📖 handleiding in het Nederlandse voor Cobra JumPack Mini CPP 8500 (2 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 24 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/2

CPP8500 mini

User Manual

Portable Power - Anytime, Anywhere!

Thank you for purchasing the Cobra JumPack® mini

CPP8500 jump starter portable power pack. Before using

this product, please read these instructions carefully to

learn about the features and capabilities of the JumPack

and how you can get the best out of it.

Note: Please charge your JumPack mini completely prior

to using it for the ﬁrst time.

IMPORTANT SAFETY INSTRUCTIONS

Product:

Battery Status Indicator Light Bar

Jump Starter Cable Input

5V / 9V Charge Input

Wireless

Charge Pad

Recharging the JumPack:

The CPP8500 can be quickly recharged with the supplied micro USB

to standard USB cable connected to a 5V/9V Quick Charge

™

compatible 2.0 USB source, laptop or USB output AC adaptor (not

included).

When the JumPack is charging, the Battery Status Indicator Light Bar

will show the current battery charge level. The last section of the light

bar that is lit will blink to show that the JumPack is charging. When the

JumPack is fully charged the light bar will turn off automatically.

For best battery performance the JumPack should be fully

recharged every 3 months.

Operation:

Check Battery Capacity:

To check the battery capacity of the JumPack press the

Power/Charge Button on the left side of the unit with no device

connected. The green lightbar will show the remaining

battery capacity.

1st Section on: 10%-40% charge

2nd Section on: 40%-65% charge

3rd Section on: 65%-85% charge

4th Section on: 85%-100% charge

Note: When charging a device the section light may decrease.

The battery capacity indicator cannot accurately measure the

capacity during rapid charging. To conﬁrm the real battery

capacity, disconnect the device being charged and press the

Power/Charge Button.

Battery Status Indicator Light Bar

123 4

Smart Jumper

Cables With

Clamps

Micro USB to

Standard USB

Cable

USB 5V / 9V Output

OUTPU 5V/9T V

INPU 5V/9T V

Starting a Vehicle:

. Make sure the JumPack is fully charged.

2. Turn off all the accessories on the vehicle.

3. Connect the RED clamp to the POSITIVE post of the battery

and the BLACK clamp to the NEGATIVE post of the battery.

Connect the battery cables into the jump cable port.

Be sure that the plug is ﬁrmly pressed into the Jump Starter

Cable Input.

Check the tricolor status LED on the jumper cables. When the

LED is green the JumPack is ready to start the vehicle.

Turn the ignition key to start the vehicle. Do not crank the

ignition for more than 3 SECONDS.

NOTE: If your car does not start after 3 attempts, consult with

a mechanic.

If the engine starts;

7. Disconnect the cables from the JumPack, then from the

battery posts.

8. Leave the engine running for at least twenty minutes to

allow the vehicle battery to recharge.

9. If the vehicle does not start on the ﬁrst try, WAIT FOR

1 MINUTE before trying to start the vehicle again

START

Charging a USB Device:

To charge a USB device, connect the device’s cable to the JumPack’s

USB 5V/9V Output.

The JumPack will turn on and start charging the device automatically.

The green light bar will indicate the device is charging.

Once the device reaches its charge capacity and ceases charging,

the light bar will turn off.

Note: When charging a device the section lit may decrease because the

JumPack cannot accurately measure the capacity during rapid charging.

To conﬁrm the actual battery charge level, disconnect the device being

charged and press the Power/Charge Level Button.

Note: Some smartphones and portable devices use Qualcomm

Quick Charge® technology that allows fast charging. The JumPack is

compatible with Quick Charge devices. The JumPack can be recharged

with a Quick Charge adapter (not included).

Charging a Device with the Wireless Charge Feature:

Power Charge Button

. Make sure the JumPack is fully charged.

2. Press and release the Power Charge Button on the side of

the JumPack. (The LED lightbar will show the capacity of the

JumPack).

3. Place the smartphone on top of the JumPack with the screen

facing up.

4. The smartphone will begin to charge.

5. Once the device is fully charged or removed the JumPack will

stop charging and shut down.

LED Lightbar

(AC adapter not included)

Power/

Charge

Button

Power/

Charge

Button

Precautions when working with the CPP8500:

WARNING: Keep the unit clear of ﬁre and water.

WARNING: Shock Hazard. Keep away from children. Do not insert

ﬁngers or foreign objects into the Jump Start Cable Input, the USB

Output Port, or the Charge Input Jack. Do not submerge this

product in water, expose to rain, snow, condensation, or spray for

long periods. Do not open the JumPack. The battery is self-con-

tained and there are no user replaceable parts inside the JumPack.

Do not use the JumPack if it is damaged or modiﬁed. Damaged or

modiﬁed batteries may exhibit unpredictable behavior resulting in

ﬁre, explosion, or risk of injury.

Do not operate the JumPack or accessories with a damaged cord or

plug. To reduce the risk of damage to cords pull from the connector

rather than the cord when unplugging.

Use of an accessory or an attachment not included with or

recommended for the JumPack may result in a risk of ﬁre, electric

shock, or injury.

WARNING: Explosion Hazard. Do not use this product where there

are ﬂammable fumes or gases, such as an inadequately vented bilge

of a boat or near propane tanks. Do not use this product in an

enclosure containing automotive-type lead-acid batteries.

WARNING: Fire Hazard

Do not crush or puncture.

CAUTION: Operating temperature and environment

Do not expose to temperatures over +113° F (+45° C) or under

-14° F (-10° C). Using at high or low temperatures may reduce the

internal battery capacity and shorten the battery life. Exposure to

ﬁre or temperatures over +265° F (+130° C) may cause explosion.

Exercise care when using in wet conditions.

Note: In extreme cold weather conditions, please store indoors for

best results.

Under abusive conditions, liquid may be ejected from the battery; avoid

contact. Liquid ejected from the battery may cause irritation or burns.

Note: If contact accidentally occurs, ﬂush with water. If liquid contacts

eyes, additionally seek medical help.

The CPP8500 is supplied with a rechargeable Li-Cobalt battery. When

charging the JumPack work in a well ventilated area and do not restrict

ventilation in any way. Proper charging practices will increase the life of the

batteries. The unit and battery must be disposed of properly when it no

longer holds a charge. Proper charging practices will increase the life of the

batteries. For information on battery recycling call toll free 800-822-8837

CAUTION: This device is not intended for use in a commercial repair facility.

Precautions when working with vehicle batteries:

WARNING: Explosion and fire hazard

Follow all instructions published by the battery manufacturer and the

manufacturer of the equipment in which the battery is installed.

2. Make sure the area around the battery is well-ventilated.

3. Never smoke or allow a spark or ﬂame in the vicinity of the engine

or batteries.

4. Be careful not to drop a metal object on the battery or allow a metal

tool to simultaneously touch the positive and negative cable ends

or battery terminals.

5. Remove personal metal items such as rings, bracelets, necklaces,

and watches when working with batteries. Batteries produce a

short-circuit current high enough to weld a ring or other similar

objects to metal, causing a severe burn.

6. If you need to remove a battery, always remove the negative

terminal from the battery ﬁrst. Make sure all accessories are

off to prevent causing a spark.

7. Someone should be within range of your voice, or close enough to

come to your aid when you work near batteries.

Have plenty of fresh water, soap and a supply of baking soda on

hand in the area of the batteries in case of contact with battery acid.

Baking soda neutralizes lead acid battery electrolyte.

Laptop

This device complies with part 15 of the FCC Rules. Operation is subject to

the following two conditions: (1) This device may not cause harmful

interference, and (2) this device must accept any interference received,

including interference that may cause undesired operation.

Note: This equipment has been tested and found to comply with the limits for a

Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are

designed to provide reasonable protection against harmful interference in a

residential installation. This equipment generates uses and can radiate radio

frequency energy and, if not installed and used in accordance with the instructions,

may cause harmful interference to radio communications. However, there is no

guarantee that interference will not occur in a particular installation.

If this equipment does cause harmful interference to radio or television

reception, which can be determined by turning the equipment off and

on, the user is encouraged to try to correct the interference by one or

more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different

from that to which the receiver is connected.

• Consult the dealer or an experienced radio/television technician for help.

WARNING: Any modiﬁcations made to this device that are not expressly

approved by party responsible for compliance could void the user’s authority

to operate this device.

Limited 1-Year Warranty:

For Products Purchased in the U.S.A.

Cobra Electronics Corporation warrants that its Cobra CPP8500 JumPack

USB Charger, and the component parts thereof, will be free of defects in

workmanship and materials for a period of one year from the date of ﬁrst

consumer purchase. This warranty may be enforced by the ﬁrst consumer

purchaser, provided that the product is utilized within the U.S.A.

Cobra will, without charge, repair or replace, at its option, defective USB

charger, products or component parts upon delivery to the Cobra Factory

Service Department, accompanied by proof of the date of ﬁrst consumer

purchase, such as a duplicated copy of a sales receipt.

You must pay any initial shipping charges required to ship the product for

warranty service, but the return charges will be at Cobra’s expense,

if the product is repaired, this warranty gives you speciﬁc rights, and

you may also have other rights which vary from state to state.

Exclusions: This limited warranty does not apply:

1. To any product damaged by accident.

2. In the event of misuse or abuse of the product, or as a result of

unauthorized alterations or repairs.

3. If the serial number has been altered, defaced or removed.

4. If the owner of the product resides outside the U.S.A.

All implied warranties, including warranties of merchantability and ﬁtness

for a particular purpose are limited in duration to the length of this

warranty.

Cobra shall not be liable for any incidental, consequential or other

damages; including, without limitation, damages resulting from loss of

use or cost of installation.

Some states do not allow limitations on how long an implied warranty

lasts and/or do not allow the exclusion or limitation of incidental or

consequential damages, so the above limitations may not apply to you.

For Products Purchased Outside The U.S.A.

Please contact your local dealer for warranty information.

Product Service:

For any questions about operating or installing this new Cobra product,

or if parts are missing…PLEASE CALL COBRA FIRST…do not

return this product to the store. If this product should require factory

service, please call Cobra before sending the product. This will ensure the

fastest turn-around time on any repair. If Cobra asks that the product be

sent to its factory, the following must be furnished to have the product

serviced and returned:

For Warranty Repair include some form of proof-of-purchase, such as

a mechanical reproduction or carbon of a sales receipt. Make sure the

date of purchase and product model number are clearly readable. If the

originals are sent, they cannot be returned;

2. Send the entire product;

3. Enclose a description of what is happening with the product. Include

a typed or clearly printed name and address of where

the product is to be returned, with phone number (required

for shipment);

4. Pack product securely to prevent damage in transit. If possible,

use the original packing material;

Ship prepaid and insured by way of a traceable carrier such as United

Parcel Service (UPS) or Priority Mail with delivery conﬁrmation to avoid

loss in transit to: Cobra Factory Service, Cobra Electronics Corporation,

6500 West Cortland Street, Chicago, Illinois 60707 U.S.A.;

6. If the product is in warranty, upon receipt of the product it will either

be repaired or exchanged depending on the model.

Please allow approximately 3 – 4 weeks before contacting Cobra for

status. If the product is out of warranty, a letter will automatically be

sent with information as to the repair charge or replacement charge.

For any questions, please call 773-889-3087 for assistance or visit us

online at www.cobra.com.

FCC Statement:

Charging a USB Device:

To charge a USB device, connect the device’s cable to the JumPack’s

USB 5V/9V Output.

The JumPack will turn on and start charging the device automatically.

The green light bar will indicate the device is charging.

Once the device reaches its charge capacity and ceases charging,

the light bar will turn off.

Note: When charging a device the section lit may decrease because the

JumPack cannot accurately measure the capacity during rapid charging.

To conﬁrm the actual battery charge level, disconnect the device being

charged and press the Power/Charge Level Button.

Note: Some smartphones and portable devices use Qualcomm

Quick Charge® technology that allows fast charging. The JumPack is

compatible with Quick Charge devices. The JumPack can be recharged

with a Quick Charge adapter (not included).

8 9

Customer Support & Trademarks:

Customer Support

Should there be any problems with this product or further information

needed on its features please visit www.cobra.com for support, frequently

asked questions, Declarations of Conformity, and the electronic manual.

For warranty and customer service information please contact the seller.

WEEE

For European Community Users

Cobra Electronics Corporation complies with Directive 2012/19/EU OF

THE EUROPEAN PARLIAMENT AND OF THE COUNCIL 4 JULY 2012 on

waste electrical and electronic equipment (WEEE ).

Waste Electrical and Electronic Equipment Information

This product has required the extraction and use of natural resources for its

production. It may contain hazardous substances that could impact health and

the environment, if not properly disposed. In order to avoid the dissemination

of those substances in our environment and to diminish the pressure on the

natural resources, we encourage you to use the appropriate take-back systems

for product disposal. Those systems will reuse or recycle most of the materials

of the product you are disposing in a sound way.

The crossed out wheeled bin symbol informs you that the product

should not be disposed of along with municipal waste and invites you

to use the appropriate separate take-back systems for product disposal.

If you need more information on the collection, reuse and recycling

systems, please contact your local or regional waste administration.

You may also contact your supplier for more information on the

environmental performances of this product.

The product label is located on the bottom of the unit.

Trademark Statement

Cobra ® and the snake design are registered trademarks of

Cobra Electronics Corporation, USA.

Cobra Electronics Corporation™ is a trademark of Cobra

Electronics Corporation,USA.

Qualcomm Quick Charge® is a trademark of Qualcomm Incorporated.

Other trademarks and trade names are those of their respective owners.

Charging a Device with the Wireless Charge Feature:

Power Charge Button

. Make sure the JumPack is fully charged.

2. Press and release the Power Charge Button on the side of

the JumPack. (The LED lightbar will show the capacity of the

JumPack).

3. Place the smartphone on top of the JumPack with the screen

facing up.

4. The smartphone will begin to charge.

5. Once the device is fully charged or removed the JumPack will

stop charging and shut down.

LED Lightbar

Troubleshooting: Wireless Charging

PROBLEM SOLUTION

• 360 Amp Peak Current Jump Starter.

• Wireless Device Charging

• Rapidly charge your Quick Charge™ - compatible devices

78% faster.

•

Rechargeable by Quick Charge compatible USB adaptors.

Product Features:

Product Specifications:

• Li-Cobalt rechargeable battery: 11.1V/22.2Wh

• Size: 5.67" L x 3.07" W x 0.94" H

• Weight: 0.63 lbs.

• Recharge times: 2.8 hours with standard USB charger

1.5 hours with a fast charge adaptor

• Starting/Peak Current: 180 Amps / 360 Amps

• USB Output: Works with Quick Charge

compatible-devices

• USB Input: Works with Quick Charge

compatible-devices

Phone does not charge

wirelessly when placed

on top of the JumPack

mini.

a. Conrm your phone is Wireless

Charging-compliant.

b. Ensure that your phone is turned on.

c. Ensure the JumPack mini internal battery is

fully charged.

d. Place your phone on top of the JumPack

mini with front side aligned and centered on

the Cobra snake logo.

e. Push and release the Power Charge Button

on the other side of the JumPack to start the

wireless charge.

PROBLEM SOLUTION

Troubleshooting: USB Charging

Phone does not charge

when connected to the

JumPack USB output.

a. Ensure the JumPack mini internal battery is

fully charged.

b. Ensure the USB cable is in working condition

(try another USB cable if necessary).

If the JumPack mini is too hot, place it in a cool

location and wait for the unit to cool down.

d. Faulty connected device. Test with another USB

device known to be in working condition such as

a smartphone to conrm USB output port is

operating correctly.

PROBLEM SOLUTION

Troubleshooting: Re-charging the JumPack

JumPack mini won’t

re-charge.

a. Conrm the USB power supply and cable are

working by testing with a working smartphone.

PROBLEM SOLUTION

Troubleshooting: Jump Starting

Engine won’t start

when connected to the

JumPack mini.

a. Ensure the JumPack mini internal battery is

fully charged.

b. Poor battery terminal connection. Make sure the

battery connection terminals are in direct contact

with the JumPack mini clamps. Move them

slightly on the same terminal and make sure

there is no corrosion or similar impeding contact.

Vehicle battery is completely discharged. The

JumPack mini does not detect any battery

voltage. Not safe to jump start with the battery

in bad condition.

PROBLEM SOLUTION

Troubleshooting: Jump Starting continued

Engine won’t start

when connected to the

JumPack mini.

d. Engine starts with the JumPack but fails to continue

running. Vehicle battery may be in poor condition. If

the engine fails to run after a second jump start and

there are no other means to jump start the vehicle

then leave the JumPack mini continuously connected

to the battery until the JumPack mini’s internal

battery is completely discharged. Try to start the

vehicle. If the vehicle fails to start or run normally,

consult with a mechanic.

Product specificaties

Merk:	Cobra
Categorie:	Niet gecategoriseerd
Model:	JumPack Mini CPP 8500

Heb je hulp nodig?

Als je hulp nodig hebt met Cobra JumPack Mini CPP 8500 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden

Uw naam*

Jouw email*

Schrijf hier uw vraag

Handleiding Niet gecategoriseerd Cobra

Cobra RX100 Handleiding

8 Mei 2023

Cobra JumPack XL H2O CPP 15000 Handleiding

19 April 2023

Cobra FV-RV1 Handleiding

19 Februari 2023

Cobra HE150 Handleiding

15 Februari 2023

Cobra ACXT1035R FLT Handleiding

26 Januari 2023

Cobra Jump Starter 800A Handleiding

22 Januari 2023

Cobra JumPack Mini CPP 8500 Handleiding

10 Januari 2023

Cobra ACXT645 Handleiding

29 December 2022

Cobra RX680 Handleiding

6 December 2022

Cobra Marine JumPack H2O Handleiding

3 December 2022

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd

Bauknecht KSI 18GF2 P2 Handleiding

27 April 2024

Fakir Artemis TS 150 Handleiding

26 April 2024

Sony UTX-M03 Handleiding

26 April 2024

Sony URX-P03 Handleiding

26 April 2024

Sony WRU-806B Handleiding

26 April 2024

Sony UTX-B03 Handleiding

26 April 2024

Sony UTX-P03 Handleiding

26 April 2024

Sony ODS-L10 Handleiding

26 April 2024

Sony PDW-U4 Handleiding

26 April 2024

Sony NXL-FR318 Handleiding

26 April 2024