Citronic CASA-10BA Handleiding

Citronic Subwoofer CASA-10BA

Lees hieronder de 📖 handleiding in het Nederlandse voor Citronic CASA-10BA (4 pagina's) in de categorie Subwoofer. Deze handleiding was nuttig voor 35 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/4

CASA

Active Subwoofer Cabinets

Item ref: CASA-10BA 178.120UK

CASA-12BA 178.122UK

CASA-15BA 178.125UK

CASA-18BA 178.128UK

User Manual

Version 1.1

Caution: Please read this manual carefully before operating

Damage caused by misuse is not covered by the warranty

CASA active subwoofers User Manual

Introduction

Thank you for choosing a CASA active subwoofer as part of your sound system.

This product is designed to enhance a full-range sound system with powerful sub-frequencies and transients.

Please read this manua to achieve optimum performance from your s cabinet and avoid damage through misuse. l ub

Package Contents

• CASA- ries active subwoofer se

• Mains lead(s)

• User manual

If you find any part is missing or the product has arrived with any problems, please contact your retailer at once.

This product contains no user-serviceable parts, so make no attempt to try to fix or modify this item yourself as this will

invalidate the warranty. We recommend you keep the original package and proof of purchase for any possible

replacement or return issues.

Warning

To prevent the risk of fire or electric shock, do not expose any of the components to rain or moisture.

Avoid impact to any of the components.

No user serviceable parts inside - refer servicing to qualified service personnel.

Safety

• Please observe the following warning conventions

CAUTION: RISK OF ELECTRIC SHOCK

DO NOT OPEN

This symbol indicates that dangerous voltage constituting a risk of electric shock

is present within this unit

This symbol indicates that there are important operating and maintenance

instructions in the literature accompanying this unit.

• Ensure that the correct mains lead is used with adequate current rating and mains voltage is as stated on the un it

• Avoid ingress of water or particles into any part of the housing If liquids are spilled on the cabinet, stop using .

immediately, allow the unit to dry out and have checked by qualified personnel before further use

Warning: this unit must be earthed

Placement

• Keep the electronic parts out of direct sunlight and away from heat sources.

• Position the cabinet on a stable surface that is adequate to support the weight of the product.

• Allow adequate space for cooling and access to controls and connections at the rear of the cabine t.

• Keep the cabinet away from damp or dusty environments.

Cleaning

• Use a soft dry or slightly damp cloth clean surfaces of the cabinet to

• A soft brush can be used to clear debris from controls and connections without damaging them

• To avoid damage, not use solvents to clean any parts of the cabinet. do

CASA active subwoofers User Manual

Rear panel layout

Setting up

Position your CASA active subwoofer( on a stable surface capable of supporting the load and vibrations from the s)

cabinet. For maximum sound delivery, position with the back close to a solid wall or in a corner of the room.

Aim the cabinet towards the audience or listeners and not in direct line of sight with any microphones that are connected

to the sound system. This is t void feedback (howling or booming caused by the microphone hearingo a “ ” itse amplifielf d).

Also, keep microphone stands away from the subwoofer to avoid vibrations being transferred to the microphones.

If a single CA active subwoofer is to be used with a stereo pair of active full-range speakers, connect both Left and SA

Right outputs from the mixer into the Left + Right inputs of the CASA active subwoofer (1) .

For maximum efficiency, Connect the Left Right OUTPUT XLRs (3) to each full range speaker, which removes the +

lowest frequencies that are being delivered by the subwoofer, freeing up the power of the full-range top cabinets to

produce upper frequencies more efficiently.

Select 80Hz or 125Hz (8 depending upon the size of cabinet. Larger cabinets ca usually produce lower frequencies, so ) n

80Hz would be a good choice for 15 top cabinets and maybe 125Hz for 8 top cabinets, depending also upon the type of ” ”

program material being played through the system. Experimentation is recommended. an unfiltered, full-range output If

is needed, connect the Left + Right LINK XLR outputs (2) to the full-range active speakers or amplifier. so, use these Al

outputs to feed to further active sub-woofers if necessary.

If there are Left + Right CASA active subwoofers in the sound system, use either Left or Right inputs and link ju st th is

one side to full-range or top cabinets (either LINK or OUTPUT).

When all signal connections are made, connect the power lead provided (or equivalent) from the mains power supply to

the IEC inlet on the CASA s ubwoofer (9). Ensure that the mains voltage is as indicated on the rear panel of the CASA

active subwoofer.

Operation

With the MASTER output level control turned fully down (7), switch on power to the CASA subwoofer (4)

Ensure that a signal is playing to the input(s) and gradually increase the MASTER to the required level. The ON LED (6)

stays lit to show that the unit is powered up but the SIGNAL LIMIT LED (6) should only light briefly on the loudes t parts

of audio (usually beats of a kick drum or other loud transients). If this LED lights for longer periods, it is advised to

reduce the output level to avoid overload.

Where 2 or more subwoofers are used un the same space, if they are facing each other, the signals ca n cancel each

other out, in this case, one of the subwoofers would need to be phase-reversed by switching the PHASE butto (5) to “ ” n

the oppo setting to the other subwoofer. This phase switch can also be used to help to mitigate feedback or lostsite “ ” sub

output in a room through experimenting with either setting.

Turn dow n the MASTER level before powering down the CASA active subwoofer to avoid loud noises and disconnect from

the mai supply if not being used for long periods. ns

L+R LINE inputs combo Jack/XLR

L+R full range LINE LINK outputs combo Jack/XLR

L+R filtered LINE TPUTs combo Jack/XLR OU

Power on/off switch

Phase switch 0°/ 180°

SIGNAL LIMIT & ON LEDs

MASTER o put level control ut

Filtered LINE out cutoff frequency switch 80/125Hz

IEC mains inlet & fuse holder

Product specificaties

Merk:	Citronic
Categorie:	Subwoofer
Model:	CASA-10BA
Kleur van het product:	Zwart
Gewicht verpakking:	18200 g
Breedte verpakking:	410 mm
Diepte verpakking:	515 mm
Hoogte verpakking:	505 mm
Type verpakking:	Doos
Materiaal:	MDF
Uitgangsvermogen:	500 W
Gemiddeld vermogen subwoofer:	300 W
Diameter driver subwoofer (imperiaal):	10 "
Lijnuitgang:	Ja
Lijningang:	Ja
Subwoofertype:	Actieve subwoofer
Frequentiebereik subwoofer:	60 - 150 Hz
Breedte van de subwoofer:	407 mm
Hoogte van de subwoofer:	431 mm
Diepte van de subwoofer:	338 mm
Gewicht subwoofer:	16230 g
XLR in:	Ja
Diameter driver subwoofer:	250 mm
Subwoofer maximale vermogen:	1000 W