Citronic C-SUB-12 Handleiding

Citronic Subwoofer C-SUB-12

Lees hieronder de 📖 handleiding in het Nederlandse voor Citronic C-SUB-12 (1 pagina's) in de categorie Subwoofer. Deze handleiding was nuttig voor 17 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/1

C-SUB Series User Manual

C-S Series Subwoofer UB

C-SUB- 12

178.661 UK

C-SUB- a 12

178.662 UK

User Manual

Caution: Please read this manual carefully before operating

Damage caused by misuse is not covered by the warranty

Introducti on

Thank you for choosing a C-SUB series subwoofer as part of your sound reinforcement system. This unit has been designed for long

reliable operation, delivering powerful low frequencies. Please read and keep this manual to get the best results from your equipment.

Setting up

Position the C-SUB cabinet on a stable surface capable of supporting the weight and vibrations from the unit.

For the best results, please the cabinet on the floor, against a wall, ideally in a corner to enhance the bass output.

A speaker pole may be inserted to the top socket for mounting a mid-top or full-range cabinet. 35mm

For the passive model C-SUB- , connect to the amplifier ou ut via the SPK input connector, ensuring that the 12 tp

amplifier is capable of a minimum load of at least 4 . A mid-top cabinet may be connected to the SPK output Ω

connector for full-range output (maintaining overall 4 impedance). Do not connect further Subwoofers to this an Ω

output.

For the active model C-SUB- a connect a line level audio source to the 12 ,

combo R/jack input and further active cabinets may be connected from XL

the XLR output. t the Level and High Cut controls to minimum and Se

connect the mains using the supplied IEC power lead, checking that the to

supply voltage is correct for the C-SUB active cabinet. Power may be daisy-

chained from the IEC output to further active cabinets for convenience.

Switch power on to the unit and ensure that the audio source is playing

whilst gradually increasing the Volume control.

Rotating the High Cut control clockwise introduces higher bass frequencies to the cabinet and increases the output.

When the correct balance of bass frequencies is achieved, set the Volume control to the required output level.

For situations where 2 or more oofers are used together, it is possible for low frequencies to cancel each other out. subw

If the bass from 2 subwoofers is sounding less effective than expected, try pushing in the INV button on one u t. ni

This button reverses the phase of the speaker and ca fix bass cancellation issues or even help to avoid feedback. n

Use whichever setting of this switch gives the best result or leave it out if there is no benefit.

Before powering down, turn the Volume control fully down to avoid loud pops or bangs through e speaker. th

Disposal: that the product is classed as Electrical or The “Crossed Wheelie Bin” symbol on the product means

Electronic equipment and should not be disposed with other household or commercial waste

at the end of its useful life. The ods must be disposed of according to your local council guidelines. go

AVSL Group Ltd. Unit 2-4 Bridgewater Park, Taylor Rd. Manchester. M41 7JQ

AVSL (EUROPE) Ltd, Unit 3D North Point House, North Point Business Park, New Mallow Road, Cork, Ireland.

Product specificaties

Merk:	Citronic
Categorie:	Subwoofer
Model:	C-SUB-12
Kleur van het product:	Zwart
Gebruikershandleiding:	Ja
Impedantie:	4 Ohm
Gemiddeld vermogen subwoofer:	300 W
Diameter driver subwoofer (imperiaal):	12 "
Subwoofertype:	Passieve subwoofer
Frequentiebereik subwoofer:	40 - 300 Hz
Breedte van de subwoofer:	460 mm
Hoogte van de subwoofer:	370 mm
Diepte van de subwoofer:	452 mm
Gewicht subwoofer:	17000 g
Subwoofer sensitiviteit:	92 dB
Aantal subwoofers:	1
Diameter driver subwoofer:	300 mm
Subwoofer maximale vermogen:	1200 W