Cisco SPA 500S Handleiding

Bekijk gratis de handleiding van Cisco SPA 500S (2 pagina’s), behorend tot de categorie Niet gecategoriseerd. Deze gids werd als nuttig beoordeeld door 15 mensen en kreeg gemiddeld 4.5 sterren uit 7 reviews. Heb je een vraag over Cisco SPA 500S of wil je andere gebruikers van dit product iets vragen? Stel een vraag

Quick Start Guide

Cisco Small Business

SPA 500S 32-Button Attendant Console for Cisco

Small Business SPA 500 Series IP Phones

Package Contents

•SPA 500S 32-Button Attendant Console for Cisco Small Business SPA

500 Series IP Phones

•Quick Start Guide

•Attachment Arm

•Attachment Arm Screws (2)

•Auxiliary Interconnect Cable

•Stand

Connecting the Equipment

The following procedure describes how to attach the Cisco SPA 500S to a

Cisco SPA 500 Series IP Phone.

S 1TEP Turn both the Cisco SPA 500 Series IP Phone and the Cisco SPA 500S

face down.

S 2TEP Align the screw hole in the Cisco SPA 500 Series IP Phone with one of

the holes on the attachment arm.

S 3TEP Insert the pegs on the attachment arm into the peg holes as shown

below on the Cisco SPA 500 Series IP Phone.

1

S 4TEP Using an attachment arm screw, secure the attachment arm to the

Cisco SPA 500 Series IP Phone.

S 5TEP Align the right screw hole in the Cisco SPA 500S with the unused hole

on the attachment arm.

S 6TEP Insert the pegs on the attachment arm into the peg holes on the Cisco

SPA 500S.

S 7TEP Using an attachment arm screw, secure the attachment arm to the

Cisco SPA 500S.

CAUTION Do not plug a telephone line cord into the AUX port. Use only the

auxiliary cable provided with the Cisco SPA 500S.

S 8TEP Locate the AUX IN port on the back of the Cisco SPA 500S. Connect

one end of the auxiliary cable to this port.

S 9TEP Locate the AUX port on the back of the Cisco SPA 500 Series IP Phone.

Connect the other end of the auxiliary cable to this port. The Cisco SPA

500S is powered by the auxiliary cable with the Cisco SPA 500 Series

IP Phone; no additional power source is required.

STEP10 Route the auxiliary cable inside the cable slot of the Cisco SPA 500S.

STEP11 Attach the appropriate desktop stand to each unit.

Product specificaties