Cisco Meraki MR53 Handleiding

Cisco Access point Meraki MR53

Lees hieronder de 📖 handleiding in het Nederlandse voor Cisco Meraki MR53 (11 pagina's) in de categorie Access point. Deze handleiding was nuttig voor 22 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/11
White Paper
Layer 7 Visibility and
Control
FEBRUARY 2013
This document highlights the foundation of Meraki’s self-learning
layer 7 trac analytics engine and the rich visibility and intuitive
management that it facilitates.
Copyright
© 2013 Cisco Systems, Inc. All rights reserved
Trademarks
MerakiÂź is a registered trademark of Cisco Systems, Inc.
Table of Contents 1 Introduction 
2 Meraki Trac Shaping Technology 
3 Management & Control 
4 Comparison with typical solutions 
5 Conclusion 
Meraki, Inc. | 660 Alabama St, San Francisco, CA 94110 | (415) 432-1000 | sales@meraki.com
2
1 Introduction
The Value of Application Visibility
An increasing reliance on Internet access for corporate productivity has created an expectation of
high performance and ubiquitous connectivity in the enterprise. In parallel, bring your own device
(BYOD) and cloud computing trends have led to a rapid proliferation in the number of devices and
applications used in enterprise networks. These factors can strain traditional networks and create
issues such as bottlenecks in network performance. It is often considered important to deliver
high performance and application optimization within the context of constrained costs, ïŹnite
bandwidth capacity, and an expectation to deliver a minimum quality of service (QoS) for critical
applications. Meeting these requirements can be challenging for budget and time-constrained IT
departments.
Two factors are critical for addressing these challenges: clear, concise insight into network
performance, and an ability to enforce network policies that optimize the network’s performance.
Network admins must be armed with complete knowledge of network utilization, not only in terms
of bandwidth, but also across all layers, even to the application level. Understanding the devices
and users accessing speciïŹc applications, and the amount of time spent and trac ïŹ‚owing
on each, can provide valuable context to understand user behavior and prompt the design of
eective network policies. Finally, a built-in toolset that allows for the creation and application of
ïŹ‚exible policy sets can ensure that application information can be acted upon by the IT admin to
help deliver optimal network performance.
An emerging use of application visibility is to leverage this data to enhance customer
engagement via interactive campaigns and targeted experiences. Understanding the ïŹ‚ow
of applications, users, and time spent can help the marketing department of a retail outlet or
hotspot provider answer the age-old question: ‘What are my users doing?’ This level of visibility
and the actionable data it provides is yet another reason to require application-layer visibility in
networking infrastructure.
Meraki, Inc. | 660 Alabama St, San Francisco, CA 94110 | (415) 432-1000 | sales@meraki.com
3


Product specificaties

Merk: Cisco
Categorie: Access point
Model: Meraki MR53
Kleur van het product: Wit
Gewicht: 840 g
Breedte: 268.2 mm
Diepte: 162 mm
Hoogte: 38.8 mm
Plaatsing: Ceiling, Table, Wall
Montage gereedschap: Ja
Frequentieband: 2.412 - 5.825 GHz
Aantal Ethernet LAN (RJ-45)-poorten: 2
Bevestigingsmogelijkheid voor kabelslot: Ja
Kabelslot sleuf type: Kensington
Vermogensverbruik (max): 21 W
Aansluiting voor netstroomadapter: Ja
Modulatie: 256-QAM
Ethernet LAN, data-overdrachtsnelheden: 10,100,1000 Mbit/s
Netwerkstandaard: IEEE 802.11a, IEEE 802.11ac, IEEE 802.11b, IEEE 802.11e, IEEE 802.11g, IEEE 802.11h, IEEE 802.11i, IEEE 802.11k, IEEE 802.11n
Ondersteunde beveiligingsalgoritmen: AES, IPSEC, TKIP
Intern: Ja
Web-gebaseerd management: Ja
Maximale overdrachtssnelheid van gegevens: 2500 Mbit/s
2,4 GHz: Ja
5 GHz: Ja
Quality of Service (QoS): Ja
VLAN=ondersteuning: Ja
Virtuele LAN-functies: Tagged VLAN
Power over Ethernet (PoE): Ja
Antennefuncties: Ingebouwde antenne
Switch type: Managed
WAN-poort: Ethernet (RJ-45)
AC-ingangsspanning: 12 V
Bedrijfstemperatuur (T-T): 0 - 40 °C
Relatieve vochtigheid in bedrijf (V-V): 5 - 95 procent
Code geharmoniseerd systeem (HS): 85176990
Type antennerichting: Omni-directioneel

Heb je hulp nodig?

Als je hulp nodig hebt met Cisco Meraki MR53 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Access point Cisco

Handleiding Access point

Nieuwste handleidingen voor Access point