Cisco Aironet 1800S Handleiding

Cisco Access point Aironet 1800S

Lees hieronder de 📖 handleiding in het Nederlandse voor Cisco Aironet 1800S (54 pagina's) in de categorie Access point. Deze handleiding was nuttig voor 46 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/54
G ETTING S GTARTED UIDE
Cisco Aironet 1800s Active Sensor
First Published: February 12, 2018
Last Updated: July 23, 2018
2
1About this Guide
2About the Network Sensor
3Safety Instructions
4Unpacking the 1800s Network Sensor
5Ports and Connectors on the 1800s
6Installation Overview
7Mounting and Powering the Network Sensor
8Configuring the Network Sensor for Wireless Service Assurance
10 Provisioning the Network Sensor via Cisco PnP
11 Upgrading the Network Sensor Software via Cisco DNA Center
12 Troubleshooting and Resetting the Network Sensor
13 Related Documentation
14 Declarations of Conformity and Regulatory Information
15 Obtain Documentation and Submit a Service Request
3
1 About this Guide
This guide provides instructions on how to install and configure your Cisco Aironet 1800s Active
Sensor. This guide also provides mounting instructions and limited troubleshooting procedures.
The Cisco Aironet 1800s Active Sensor is referred to as the network sensor, or sensor in this document.
2 About the Network Sensor
The wireless Cisco Aironet 1800s Active Sensor is
a part of Cisco's Wire
less Service Assurance
solution. The Wireless Service Assurance platform has three components, namely, Wireless
Performance Analytics, Real-time Client Troubleshooting, and Proactive Health Assessment.
The Cisco Aironet 1800s Active Sensor is an 802.11 a/b/g/n/ac (Wave 2) sensor, with internal antennas
and an Ethernet backhaul. The network sensor can be mounted, in a vertical orientation, on a wall or
a desk and supports 2x2:2 SS MU-MIMO applications. The sensor is capable of joining an
infrastructure access point as a client. The sensor can be used to monitor, measure, and troubleshoot
overall wireless network performance.
The 1800s wireless network sensor is available as a base unit with the following power modules which
can be plugged into the base unit:
• USB adapter module (AIR-MOD-USB-xx)
• AC adapter module (AIR-MOD-AC)
• PoE/Ethernet module (AIR-MOD-POE)
Network Sensor Model Numbers and Regulatory Domains
The Cisco Aironet 1800s Active Sensor model has the model number format AIR-AP1800S-x-K9,
where the ‘x’ placeholder represents the regulatory domain. The ‘x’ can be any one of the supported
regulatory domains as listed at:
http://www.cisco.com/go/aironet/compliance


Product specificaties

Merk: Cisco
Categorie: Access point
Model: Aironet 1800S

Heb je hulp nodig?

Als je hulp nodig hebt met Cisco Aironet 1800S stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Access point Cisco

Handleiding Access point

Nieuwste handleidingen voor Access point