Chuango PIR-926 Handleiding

Chuango Bewegingsdetector PIR-926

Lees hieronder de 📖 handleiding in het Nederlandse voor Chuango PIR-926 (29 pagina's) in de categorie Bewegingsdetector. Deze handleiding was nuttig voor 35 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/29

MULTILINGUAL

USER MANUAL

EN DE ESFR PTNL IT

Printed in China

Ver: PIR-926-UM-ML-V1.0

PIR-926

Solar-Powered Dual-Tech

Motion Detector

EN EN

Introduction

PIR-926 is a solar-powered motion detector utilizing a single

passive infrared element and microwave technology. It consists of

digital dual-core fuzzy logic infrared control chip and intelligent

analysis which could effectively identify interference signals from

body movement signals so as to reduce false alarms. The detector

is battery powered and kept re-charging by the solar panel to

save energy. Unique housing material and structure improve its

waterproof level for outdoor use. Only after being connected

successfully with alarm system, the detector can work normally.

Features

1. Accurate detection

■It has microwave and infrared dual detections to prevent false

alarms.

■It consists of digital dual-core fuzzy logic infrared control chip and

intelligent analysis which could effectively identify interference

signals from body movement signals.

■With automatic temperature compensation and anti-air turbulence

technology, it easily adapts to environmental changes.

2. Outdoor use

It adopts ABS and anti-UV materials for outdoor use with IP65

rating.

3. Energy saving

■Rechargeable by solar power.

■Energy saving mode to reduce battery charging times, and

extending battery life.

Product Overview

Solar Panel

LED Indicator

Detection Lens

Detector Installation Bracket

Base

Fixing Screw

LED Indication

LED Status Meaning

Red and orange LEDs ash

continuously for 1 min Self-testing

Red LED ashes once Infrared is triggered

Orange LED ashes once Microwave is triggered

Red and orange LEDs ash once

at the same time

Both infrared and microwave

are triggered, the detector

sends alarm signal.

Red LED ash 3 times every

12 seconds

Low battery. Please install on

place with sufcient sunlight

EN EN

PCB Layout

① LED On/Off

② Working Mode

Setting

⑤ Tamper Switch

③ Battery

⑥ Zone Mode Setting

④ Microwave Sensitive Adjustment

3.7 V 18650

1. LED options: ON/OFF (default setting is ON).

2. Working mode options: 10S=Test mode, 5MIN=Power saving mode

(default setting is test mode).

3. Battery: One piece of 18650 rechargeable lithium battery.

4. Microwave sensitivity adjustment options: HIGH, MEDIUM, LOW.

(default setting is medium).

5. Tamper switch: In working state, if the housing is opened, detector

will send alarm signal.

6. Zone mode options: Normal zone (Arm Zone), home zone, 24-H

zone (default setting is normal zone).

You can change the zone mode of this detector as follows:

Open the rear cover of the detector, change the array of jumpers to

the corresponding position as below:

Normal zone (Arm Zone): In arm or home arm state, the detector

set at normal zone will trigger an alarm once intrusion is detected.

Home zone: In home arm state, the detector set at home zone is

disarmed.

24-H zone: The detector set at 24-H zone will trigger an alarm once

intrusion is detected, no matter the system is armed or disarmed.

Detection Scope

Top view

Side view

2m 4m 6m 8

11 0 °

Working Mode Selection

After the battery is loaded, the detector enters into 1 min self-

testing with the red and orange LEDs ashing continuously, and

then it starts to work according to the pre-set working mode.

5 MIN

10 S

5 MIN

10 S

Testing Mode Power Saving Mode

(Arm Zone)

Product specificaties

Merk:	Chuango
Categorie:	Bewegingsdetector
Model:	PIR-926
Kleur van het product:	Wit
Connectiviteitstechnologie:	Draadloos
Alarm functie:	Ja
Type beeldsensor:	Passieve infraroodsensor (PIR)
Ingangsspanning:	3.7 V
Maximumbereik:	80 m
Frequentie:	315 MHz
Afmetingen (B x D x H):	186 x 200 x 125 mm
Bedrijfstemperatuur (T-T):	-10 - 55 °C
Batterijtechnologie:	Lithium
Detectie hoek:	110 °
Lichtgevoeligheid:	2000 Lux
Stroom in standby:	0.35 mA