Chief TPK1 Handleiding
Chief
Flat panel steun
TPK1
Bekijk gratis de handleiding van Chief TPK1 (4 pagina’s), behorend tot de categorie Flat panel steun. Deze gids werd als nuttig beoordeeld door 20 mensen en kreeg gemiddeld 5.0 sterren uit 10.5 reviews. Heb je een vraag over Chief TPK1 of wil je andere gebruikers van dit product iets vragen? Stel een vraag
Pagina 1/4
I N S T A L L A T I O N I N S T R U C T I O N S
Truss/Pole Kit
TPK-1
TPK-1 Installation Instructions
2
DISCLAIMER
Milestone AV Technologies and its affiliated corporations and
subsidiaries (collectively "Milestone"), intend to make this
manual accurate and complete. However, Milestone makes no
claim that the information contained herein covers all details,
conditions or variations, nor does it provide for every possible
contingency in connection with the installation or use of this
product. The information contained in this document is subject
to change without notice or obligation of any kind. Milestone
makes no representation of warranty, expressed or implied,
regarding the information contained herein. Milestone assumes
no responsibility for accuracy, completeness or sufficiency of
the information contained in this document.
Chief® is a registered trademark of Milestone AV Technologies.
All rights reserved.
IMPORTANT WARNINGS AND
CAUTIONS!
WARNING: A WARNING alerts you to the possibility of
serious injury or death if you do not follow the instructions.
CAUTION: A CAUTION alerts you to the possibility of
damage or destruction of equipment if you do not follow the
corresponding instructions.
WARNING: Failure to read, thoroughly understand, and
follow all instructions can result in serious personal injury,
damage to equipment, or voiding of factory warranty! It is the
installer’s responsibility to make sure all components are
properly assembled and installed using the instructions
provided.
WARNING: Failure to provide adequate structural strength
for this component can result in serious personal injury or
damage to equipment! It is the installer’s responsibility to
make sure the structure to which this component is attached
can support five times the combined weight of all equipment.
Reinforce the structure as required before installing the
component.
WARNING: Exceeding the weight capacity can result in
serious personal injury or damage to equipment! It is the
installer’s responsibility to make sure the combined weight of
all components does not exceed 150 lbs (68.04 kg) or the
maximum weight capacity of the mount to which this
accessory is being installed. This product is NOT designed
for use with articulating wall mounts.
TOOLS/PARTS FOR INSTALLATION
A(2)
[truss clamp]
B(4) 3/8-16 x 2"
C(4)
3/8"
Installation Instructions TPK-1
3
Assembly And Installation
1. Place clamp on truss or pole. (See Figure 1)
Figure 1
2. Using two 3/8-16 x 2" hex head bolts and 3/8" washers,
secure clamp to device being mounted.
3. Repeat Steps 1-2 for the second clamp.
(A) x 2
(C) x 4
(B) x 4
mounting device (typical)
2
1
Product specificaties
| Merk: | Chief |
| Categorie: | Flat panel steun |
| Model: | TPK1 |
Heb je hulp nodig?
Als je hulp nodig hebt met Chief TPK1 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Flat panel steun Chief
7 Mei 2025
2 April 2025
2 April 2025
2 April 2025
2 April 2025
9 Maart 2025
5 Februari 2025
30 Januari 2025
30 Januari 2025
15 Januari 2025
Handleiding Flat panel steun
- Atdec
- Reflecta
- Ematic
- SmartMetals
- Wentronic
- Icy Box
- Speaka
- Newstar
- Sanus
- Dataflex
- DQ
- Unicol
- Samsung
- Konig & Meyer
- 3M
Nieuwste handleidingen voor Flat panel steun
17 Juni 2025
17 Juni 2025
17 Juni 2025
16 Juni 2025
16 Juni 2025
16 Juni 2025
16 Juni 2025
16 Juni 2025
16 Juni 2025
16 Juni 2025