Atdec AWM-ADTC Handleiding

Bekijk gratis de handleiding van Atdec AWM-ADTC (5 pagina’s), behorend tot de categorie Flat panel steun. Deze gids werd als nuttig beoordeeld door 2 mensen en kreeg gemiddeld 4.1 sterren uit 4 reviews. Heb je een vraag over Atdec AWM-ADTC of wil je andere gebruikers van dit product iets vragen? Stel een vraag

AWM-ADTC Page 1 of 5

Installation Guide

AWM-ADTC

AWM Dynamic Arm for Post

E

Screw

M4x10mm

(x4)

F

Security

screw

(x1)

G

4mm

Hex Key

(x1)

D

Post Clamp

(x1)

C

VESA Head

(x1)

A

Dynamic Link

(x1)

B

Lower Link

(x1)

COMPONENT CHECKLIST

REQUIRED TOOLS

CAPACITY

Flat Monitors

2 - 8kg

(4.4 - 17.6lbs)

Curved Monitors

2 - 8kg

(4.4 - 17.6lbs)

Curved monitors with an overall depth

up to 140mm (5.5”).

Monitor weight should be within the

weight range of all modular elements

that make up the complete monitor

mounting solution.

• Phillips Head Screwdriver

IMPORTANT INFORMATION

! Please ensure this product is installed as per these installation instructions.

! Do not remove or throw away the plastic sleeve on the arm link and channel clamp.

! The manufacturer accepts no responsibility for incorrect installation.

! This product is compatible with Atdec AWM Series Posts and Wall Channels

! This product is not suitable for outdoor use or mobile applications

! Do not over-tighten screws and adjustment points on product.

! Periodic adjustment to counterbalance and tilt tension may be required.

! VESA mounted accessories (such as mini PC brackets and mounts), offset VESA locations, and unevenly weighted monitors

(relative to the center of the VESA mounting interface) exert additional leverage that can exceed the capacity of the mount

even though the monitor weight may be within the stated range. Please contact Atdec if you would like further information.

Product specificaties