Chief RMC1 Handleiding

Chief Flat panel steun RMC1

Bekijk gratis de handleiding van Chief RMC1 (12 pagina’s), behorend tot de categorie Flat panel steun. Deze gids werd als nuttig beoordeeld door 76 mensen en kreeg gemiddeld 4.2 sterren uit 38.5 reviews. Heb je een vraag over Chief RMC1 of wil je andere gebruikers van dit product iets vragen? Stel een vraag

Download PDF

Pagina 1/12

I N S T A L L A T I O N I N S T R U C T I O N S

RMC1 RLC1

(Shown installed to

1-1/2" NPT column

(Shown installed to

UL Listed Chief CPA column

as example only) as example only)

Single Flat Panel Ceiling Mounts

Spanish Product Description

German Product Description

Portuguese Product Description

Italian Product Description

Dutch Product Description

French Product Description

RMC1 / RLC1

RMC1 / RLC1 Installation Instructions

DISCLAIMER

Milestone AV Technologies and its affiliated corporations and

subsidiaries (collectively "Milestone"), intend to make this

manual accurate and complete. However, Milestone makes no

claim that the information contained herein covers all details,

conditions or variations, nor does it provide for every possible

contingency in connection with the installation or use of this

product. The information contained in this document is subject

to change without notice or obligation of any kind. Milestone

makes no representation of warranty, expressed or implied,

regarding the information contained herein. Milestone assumes

no responsibility for accuracy, completeness or sufficiency of

the information contained in this document.

Chief® is a registered trademark of Milestone AV Technologies.

IMPORTANT SAFETY INSTRUCTIONS

WARNING: A WARNING alerts you to the possibility of

serious injury or death if you do not follow the instructions.

CAUTION: A CAUTION alerts you to the possibility of

damage or destruction of equipment if you do not follow the

corresponding instructions.

WARNING: Failure to read, thoroughly understand, and

follow all instructions can result in serious personal injury,

damage to equipment, or voiding of factory warranty! It is the

installer’s responsibility to make sure all components are

properly assembled and installed using the instructions

provided.

WARNING: Failure to provide adequate structural strength

for this component can result in serious personal injury or

damage to equipment! It is the installer’s responsibility to

make sure the structure to which this component is attached

can support five times the combined weight of all equipment.

Reinforce the structure as required before installing the

component.

WARNING: Exceeding the weight capacity can result in

serious personal injury or damage to equipment! It is the

installer’s responsibility to make sure the combined weight of

all components located between the mount up to (and

including) the display does not exceed 125 lbs (56.7 kg).

WARNING: Use this mounting system only for its intended

use as described in these instructions. Do not use

attachments not recommended by the manufacturer.

WARNING: Never operate this mounting system if it is

damaged. Return the mounting system to a service center for

examination and repair.

WARNING: Do not use this product outdoors.

IMPORTANT ! : The RMC1 and RLC1

mounts are

designed to be mounted to a 1-1/2" NPT or NPSM

following ANSI/ASME B1.20.1 (Schedule 40, 0.154"

minimum thickness steel or aluminum-ASTM B221)

threaded extension column (not included);

a UL

Listed Chief CPA extension column (not included).

--SAVE THESE INSTRUCTIONS--

Installation Instructions RMC1 / RLC1

DIMENSIONS

18.00

457.2

MAX MOUNTING PATTERN

7.87

[200]

MIN MOUNTING PATTERN

RMC1

24.00

609.6

MAX MOUNTING PATTERN

7.87

[200]

MIN MOUNTING PATTERN

15.75

400.0

MAX MOUNTING

PATTERN

RLC1

Product specificaties

Merk:	Chief
Categorie:	Flat panel steun
Model:	RMC1
Kleur van het product:	Zwart
Gewicht:	8000 g
Materiaal behuizing:	Metaal
Montagewijze:	Plafond
Maximale gewichtscapaciteit:	56700 kg
Montage interface compatibiliteit (min):	457 x 400 mm
Montage interface compatibiliteit (max):	457 x 400 mm
Aantal displays ondersteund:	1
Bereik kantelhoek:	-20 - 5 °