Chief PG1AW Handleiding

Chief Projector accessoire PG1AW

Lees hieronder de 📖 handleiding in het Nederlandse voor Chief PG1AW (12 pagina's) in de categorie Projector accessoire. Deze handleiding was nuttig voor 19 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/12

I N S T A L L A T I O N I N S T R U C T I O N S

Projector Guard Security Cage

PG1A, PG2A

PG1A, PG2A Installation Instructions

DISCLAIMER

CSAV, Inc., and its affiliated corporations and subsidiaries

(collectively, "CSAV"), intend to make this manual accurate and

complete. However, CSAV makes no claim that the information

contained herein covers all details, conditions or variations, nor

does it provide for every possible contingency in connection

with the installation or use of this product. The information

contained in this document is subject to change without notice

or obligation of any kind. CSAV makes no representation of

warranty, expressed or implied, regarding the information

contained herein. CSAV assumes no responsibility for

accuracy, completeness or sufficiency of the information

contained in this document.

IMPORTANT WARNINGS AND

CAUTIONS!

WARNING: A WARNING alerts you to the possibility of

serious injury or death if you do not follow the instructions.

CAUTION: A CAUTION alerts you to the possibility of

damage or destruction of equipment if you do not follow the

corresponding instructions.

WARNING: Failure to read, thoroughly understand, and

follow all instructions can result in serious personal injury,

damage to equipment, or voiding of factory warranty! It is the

installer’s responsibility to make sure all components are

properly assembled and installed using the instructions

provided.

WARNING: Failure to provide adequate structural strength

for this component can result in serious personal injury or

damage to equipment! It is the installer’s responsibility to

make sure the structure to which this component is attached

can support five times the combined weight of all equipment.

Reinforce the structure as required before installing the

component.

Dimensions Projector Size Limit

Model Height Width Depth Height Width Depth

10.18” 20.52” 20.38” 7.50” 20.375” 20.00”*

PG-1A

258.589mm 521.320mm 517.525mm 19.05 cm 51.75 cm 50.8 cm

10.18” 16.15” 16.38” 7.50” 16.00” 16.00”*

PG-2A

258.589mm 410.195mm 415.925mm 19.05 cm 40.46 cm 40.64 cm

* Height dimension from bottom of RPA to surface of rivets (at bottom of projector guard).

Height dimension does NOT include SLB/SLM interface. You must allow for .25" to .75" less height to

account for the SLB/SLM interface.

RPM series mount reduces maximum height by 1.00".

Maximum height using RPA series mount is 7.25" to 6.75".

Maximum height using RPM series mount is 6.25" to 5.75".

The PG1A weighs 19.95 lbs (9.06 kg)

The PG2A weighs 15.20 lbs (6.88 kg)

PROJECTOR GUARD SPECIFICATIONS

Installation Instructions PG1A, PG2A

PG1A

1.5” NPSM COUPLER WILL

ALLOW FOR 2.50” OF FRONT

TO BACK ADJUSTABLE SHIFT

[89.687]

3.53

[50.800]

2.00

[406.400]

16.00 ID

[258.589]

10.18 OD

[410.195]

16.15 OD

[199.996]

7.87

FROM BOTTOM OF RPA

TO SURFACE OF RIVETS

[404.503]

15.93 ID

NOTES:

1. RPA AND SLB BRACKET SOLD SEPARATELY.

2. HEIGHT DIMENSION DOES NOT INCLUDE SLB/SLM INTERFACE.

YOU MUST ALLOW FOR .25” TO .75” LESS HEIGHT FROM BOTTOM

OF RPA DIMENSION FOR SLB/SLM INTERFACE.

3. RPM SERIES MOUNT REDUCES MAXIMUM HEIGHT BY 1.00”.

4. MAXIMUM HEIGHT USING RPA SERIES MOUNT IS 7.62” TO 7.12”.

5. MAXIMUM HEIGHT USING RPM SERIES MOUNT IS 6.62” TO 6.12”.

[101.600]

4.00

[415.925]

16.38 OD

PG2A

Product specificaties

Merk:	Chief
Categorie:	Projector accessoire
Model:	PG1AW
Kleur van het product:	Wit
Gewicht:	10770 g
Breedte:	521 mm
Diepte:	518 mm
Hoogte:	259 mm
Certificering:	TAA
Merkcompatibiliteit:	Chief
Compatibiliteit:	RPA & RPM Series
Afmetingen (B x D x H):	521 x 518 x 259 mm
Code geharmoniseerd systeem (HS):	85299097