Chief PDR2644B Handleiding

Chief Flat panel steun PDR2644B

Bekijk gratis de handleiding van Chief PDR2644B (4 pagina’s), behorend tot de categorie Flat panel steun. Deze gids werd als nuttig beoordeeld door 45 mensen en kreeg gemiddeld 4.7 sterren uit 23 reviews. Heb je een vraag over Chief PDR2644B of wil je andere gebruikers van dit product iets vragen? Stel een vraag

Download PDF

Pagina 1/4

I N S T A L L A T I O N I N S T R U C T I O N S

Instrucciones de instalación

Installationsanleitung

Instruções de Instalação

Istruzioni di installazione

Installatie-instructies

Instructions d´installation

Large Flat Panel Interface Bracket

Spanish Product Description

German Product Description

Portuguese Product Description

Italian Product Description

Dutch Product Description

French Product Description

PSB-2644

PSB-2644 Installation Instructions

DISCLAIMER

Milestone AV Technologies and its affiliated corporations and

subsidiaries (collectively "Milestone"), intend to make this

manual accurate and complete. However, Milestone makes no

claim that the information contained herein covers all details,

conditions or variations, nor does it provide for every possible

contingency in connection with the installation or use of this

product. The information contained in this document is subject

to change without notice or obligation of any kind. Milestone

makes no representation of warranty, expressed or implied,

regarding the information contained herein. Milestone assumes

no responsibility for accuracy, completeness or sufficiency of

the information contained in this document.

Chief® is a registered trademark of Milestone AV Technologies.

IMPORTANT WARNINGS AND

CAUTIONS!

WARNING: A WARNING alerts you to the possibility of

serious injury or death if you do not follow the instructions.

CAUTION: A CAUTION alerts you to the possibility of

damage or destruction of equipment if you do not follow the

corresponding instructions.

WARNING: Failure to read, thoroughly understand, and

follow all instructions can result in serious personal injury,

damage to equipment, or voiding of factory warranty! It is the

installer’s responsibility to make sure all components are

properly assembled and installed using the instructions

provided.

WARNING: Failure to provide adequate structural strength

for this component can result in serious personal injury or

damage to equipment! It is the installer’s responsibility to

make sure the structure to which this component is attached

can support five times the combined weight of all equipment.

Reinforce the structure as required before installing the

component. The wall to which the mount is being attached

may have a maximum drywall thickness of 5/8" (1.6cm).

WARNING: Exceeding the weight capacity can result in

serious personal injury or damage to equipment! It is the

installer’s responsibility to make sure the maximum weight

installed on the interface bracket doesn’t exceed 175 lbs

(79.4 kg).

DIMENSIONS

17.11

434.6

20.75

527.1

6.49

164.9

13.20

335.3

11.02

279.9

7.40

188

3.06

77.8

1.45

36.9

.50

12.7

2.55

64.7

6.31

160.4

8.19

208

.58

14.7

3.56

90.5

4.52

114.7

.67

17.1

.35

BRACKET WORKS WITH 400MM x 300MM AND

300MM x 300MM MOUNTING PATTERNS

Installation Instructions PSB-2644

TOOLS / PARTS FOR INSTALLATION

ASSEMBLY AND INSTALLATION

NOTE: Brackets will work with 400x300mm or 300x300mm

mounting patterns.

1. Attach mounting buttons (C) to interface brackets (A and B)

using four #10-24 x 1/2" button head cap screws (D) and a

1/8" hex key (G). (See Figure 1)

NOTE: Mounting buttons (C) may be installed to lower holes if

more space is needed below display. (See Figure 1)

Figure 1

2. Attach the interface brackets (A and B) to the back of the

display using four M6x20mm Phillips pan machine screws

(E), four spacers (F) and a #2 screwdriver. (See Figure 2)

CAUTION: Using screws of improper length or diameter

may damage your display! Only use screws provided with

interface bracket!

NOTE: Use the inside holes for 300x300mm mounting

patterns. (See Figure 2)

Figure 2

3. Complete the installation following the mount installation

instructions.

1/8"

(Included)

A (1)

[right interface

bracket] B (1)

[left interface

C (4)

[mounting

button]

G (1)

1/8"

bracket]

D (4)

#10-24 x 1/2

E (4)

M6x20mm

F (4)

.75x.25x.25

(D) x 4

(A)

(B)

lower button

holes

(A)

(E) x 4

(400mmx300mm

mounting pattern shown)

300x300mm

mounting pattern

(B)

(F) x 4

Product specificaties

Merk:	Chief
Categorie:	Flat panel steun
Model:	PDR2644B
Kleur van het product:	Zwart
Breedte:	1003 mm
Diepte:	86 mm
Hoogte:	560 mm
Materiaal behuizing:	Metaal
Montagewijze:	Muur
Geschikt voor schermmaten:	42 - 71 "
Maximale gewichtscapaciteit:	90.7 kg
Compatibiliteit:	Vlakke paneel
Montage interface compatibiliteit (min):	200 x 200 mm
Montage interface compatibiliteit (max):	200 x 200 mm
Bereik kantelhoek:	-15 - 5 °
Maximale schermgrootte:	71 "
Minimale schermgrootte:	42 "
Afstand tot de muur (min):	86.4 mm
Afstand tot de muur (max.):	939.8 mm