Chief LTM1U Handleiding

Chief Flat panel steun LTM1U

Bekijk gratis de handleiding van Chief LTM1U (16 pagina’s), behorend tot de categorie Flat panel steun. Deze gids werd als nuttig beoordeeld door 4 mensen en kreeg gemiddeld 4.9 sterren uit 2.5 reviews. Heb je een vraag over Chief LTM1U of wil je andere gebruikers van dit product iets vragen? Stel een vraag

Download PDF

Pagina 1/16

I N S T A L L A T I O N I N S T R U C T I O N S

LSM1U

LTM1U

MSM1U

MTM1U

FUSION HEIGHT ADJUST

FLAT PANEL MOUNTS

Spanish Product Description

German Product Description

Portuguese Product Description

Italian Product Description

MSM1U / MTM1U /

LSM1U / LTM1U

MSM1U / MTM1U / LSM1U / LTM1U Installation Instructions

DISCLAIMER

Legrand AV and its affiliated corporations and subsidiaries |

(collectively “Legrand AV”), intend to make this manual |

accurate and complete. However, Legrand AV makes no claim |

that the information contained herein covers all details,

conditions or variations, nor does it provide for every possible

contingency in connection with the installation or use of this

product. The information contained in this document is subject

to change without notice or obligation of any kind. Legrand AV |

makes no representation of warranty, expressed or implied,

regarding the information contained herein. Legrand AV |

assumes no responsibility for accuracy, completeness or

sufficiency of the information contained in this document.

Chief® is a registered trademark of Legrand AV Inc.

DEFINITIONS

MOUNTING SYSTEM: A MOUNTING SYSTEM is the

primary Chief product to which an accessory and/or component

is attached.

ACCESSORY: AN ACCESSORY is the secondary Chief

product which is attached to a primary Chief product, and may

have a component attached or setting on it.

COMPONENT: A COMPONENT is an audiovisual item

designed to be attached or resting on an accessory or mounting

system such as a video camera, CPU, screen, display,

projector, etc.

WARNING: A WARNING alerts you to the possibility of

serious injury or death if you do not follow the instructions.

CAUTION: A CAUTION alerts you to the possibility of

damage or destruction of equipment if you do not follow the

corresponding instructions.

IMPORTANT SAFETY INSTRUCTIONS

WARNING: Failure to read, thoroughly understand, and

follow all instructions can result in serious personal injury,

damage to equipment, or voiding of factory warranty! It is the

installer’s responsibility to make sure all mounting systems

are properly assembled and installed using the instructions

provided.

WARNING: Failure to provide adequate structural strength

for this mounting system can result in serious personal injury

or damage to equipment! It is the installer’s responsibility to

make sure the structure to which this mounting system is

attached can support five times the combined weight of all

equipment. Reinforce the structure as required before

installing the mounting system.

WARNING: Exceeding the weight capacity can result in

serious personal injury or damage to equipment! It is the

installer’s responsibility to make sure the combined weight of

all components and accessories attached to the

MSM1U/

MTM1U/LSM1U/LTM1U does not exceed:

• MSM1U/MTM1U

• 16" wood studs:

125 lbs (56.7 kg)

• 16" steel studs:

125 lbs (56.7 kg)

• Bare concrete/block:

125 lbs (56.7 kg)

• LSM1U/LTM1U

• 16" / 24" wood studs:

200 lbs (90.7 kg)

• 16" / 24" steel studs:

175 lbs (79.4 kg)

• Bare concrete/block:

200 lbs (90.7 kg)

WARNING: Use this mounting system only for its intended

use as described in these instructions. Do not use

attachments not recommended by the manufacturer.

WARNING: Never operate this mounting system if it is

damaged. Return the mounting system to a service center for

examination and repair.

WARNING: Do not use this mounting system outdoors.

IMPORTANT ! :

The MSM1U/MTM1U/LSM1U/LTM1U mounts

are designed to be mounted to:

• a bare 8" concrete or 8"x8"x16" concrete block wall, or

• a 2" x 4" wood studs wall covered by drywall with

maximum thickness of 5/8":

• 2" x 4"-25ga minimum steel studs wall.

• Wood/steel studs must be 16" MSM1U/MTM1U:

on center;

• Wood/steel studs may be 16" or LSM1U/LTM1U:

24" on center.

NOTE: The

MSM1U/MTM1U/LSM1U/LTM1U

Fusion height-

adjust mounts may be used with the UL Listed

FCAV1U Fusion pull-out accessory.

--SAVE THESE INSTRUCTIONS--

Installation Instructions MSM1U / MTM1U / LSM1U / LTM1U

DIMENSIONS

6.00

152.4

RAILS CAN BE SLID LEFT OR RIGHT

FOR OFFSET

1. MAXIMUM MOUNTING PATTERN IS 22.25" (565 mm) WITHOUT REVERSING UPRIGHTS

2. MAXIMUM MOUNTING PATTERN IS 25.6" (650 mm) WITH REVERSING UPRIGHTS

3. FOR RECESSED APPLICATIONS, MINIMUM VERTICAL LIFT FOR HOOK

ENGAGEMENT IS .75" (19 mm)

MTM1U

DIMENSIONS: INCHES

[MILLIMETERS]

DIMENSIONS: INCHES

MSM1U

[MILLIMETERS]

6.00

15 2.4

RAILS CAN BE SLID LEFT O R RIGHT

FOR OFFSET

1. MA XIMUM MO UN TI NG PA TTERN IS 22 .7 " (576 mm) WITHOUT REVERSIN G UPRIGHTS

2. MA XIMUM MO UN TI NG PA TTERN IS 25 .3 " (642 mm) WITH REVERSING UPR IGHTS

3. FO R RE CESSED APPLICATIO NS, MINIMUM VERTICA L LIFT FO R HOOK

ENG AGEMENT IS .75" (1 9) mm )

Product specificaties

Merk:	Chief
Categorie:	Flat panel steun
Model:	LTM1U
Kleur van het product:	Zwart
Gewicht:	9980 g
Breedte:	882 mm
Diepte:	51 mm
Hoogte:	432 mm
Gewicht verpakking:	10000 g
Materiaal behuizing:	Staal
In hoogte verstelbaar:	Ja
Montage gereedschap:	Ja
Montagewijze:	Muur
Maximale gewichtscapaciteit:	90.7 kg
Certificering:	UL
Paneelmontage-interface:	200 x 200,300 x 300,400 x 200,400 x 400,600 x 400,700 x 400,800 x 400 mm
Montage interface compatibiliteit (min):	200 x 200 mm
Montage interface compatibiliteit (max):	800 x 400 mm
Aantal displays ondersteund:	1
Verbeterd kabelbeheer:	Ja
Bereik kantelhoek:	-2 - 12 °
Maximale schermgrootte:	65 "
Code geharmoniseerd systeem (HS):	85299097
Minimale schermgrootte:	37 "
Geschikt voor computerscherm:	Ja
Afstand tot de muur (min):	51 mm
Afstand tot de muur (max.):	51 mm
Maximum afstand tot plafond:	51 mm
Maximale afstand tot vloer:	51 mm