Chief Pan-1 Handleiding


Lees hieronder de đź“– handleiding in het Nederlandse voor Chief Pan-1 (8 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 181 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/8
CHIEF MANUFACTURING INC. 8802-000178 (Rev. A)
1-800-582-6480 952-894-6280 FAX 952-894-6918 2005 Chief Manufacturing
8401 EAGLE CREEK PARKWAY, SUITE 700 www.chiefmfg.com
SAVAGE, MINNESOTA 55378 USA 02/05
I N S T A L L A T I O N I N S T R U C T I O N S
PAN-1 Lens Support
The PAN-1 Lens Support is compatible with any RPA
projector mount.
PAN-1 LENS SUPPORT
BEFORE YOU BEGIN
• CAUTION: To prevent damage to the mount, which could affect or void the Factory warranty, thoroughly
study all instructions and illustrations before you begin to install the mount brackets. Pay particular atten-
tion to the “Important Warnings and Cautions” on Page 2.
• If you have any questions about this installation, contact Chief Manufacturing at 1-800-582-6480 or 952-582-6480.
Instruction Instructions PAN-1
2
IMPORTANT WARNINGS and CAUTIONS!
WARNING A WARNING alerts you to the possibility of serious injury or death if you do not follow
the instructions.
CAUTION A CAUTION alerts you to the possibility of damage or destruction of equipment if you do not
follow the corresponding instructions.
• WARNING Improper installation can result in serious personal injury! Make sure that the
mounting surface can support a redundant weight factor five times the total weight of
the equipment: if not, reinforce the structure before installing the PAN-1 on the
projector.
• WARNING Be aware of the potential for personal injury or damage to the unit if it is not
adequately mounted.
• CAUTION Inspect the unit for shipping damage.
CONTENTS
TOOLS REQUIRED FOR INSTALLATION................... 2
INSPECT PARTS BEFORE ASSEMBLY ..................... 3
Remove and Inspect the PAN-1................................ 3
PAN-1 INSTALLATION PROCEDURES....................... 4
Removing Projector from Ceiling Mount.................... 4
Attaching PAN-1 to RPA............................................ 5
Installing and Adjusting Lens..................................... 6
Adjusting PAN-1 to Projector Lens............................ 7
Pitch Adjustment ................................................... 7
Extension Adjustment ........................................... 7
Lateral Shift Adjustment ........................................ 7
Height Adjustment................................................. 7
Adjustment Notes.................................................. 7
TOOLS REQUIRED FOR
INSTALLATION
• Phillips screwdriver
• 9/64” Allen wrench or Hex wrench
NOTE: Other tools may be required depending on the
method of installation.
Instruction Instructions PAN-1
3
INSPECT PARTS BEFORE ASSEMBLY
Remove and Inspect the PAN-1
1. Open the shipping container and remove the PAN-1
from the container.
2. Carefully inspect the PAN-1 for shipping damage. If
any damage is apparent, call your carrier claims
agent and do not continue with the assembly
procedure until the carrier has reviewed the damage.
NOTE: Read all assembly instructions before
starting assembly.
3. Carefully inspect all components for damage. See
Table 1, Figure 1, and Figure 2 for details.
Figure 1. PAN-1 Lens Support
Table 1. PAN-1 Parts
ITEM PART NAME QTY
10 MAIN PLATE 1
20 FRONT ADJUSTABLE PLATE 1
30 SEMS SCREW, , , PAN SELF-TAPPING PHILLIPS 4
40 FRONT PLATE 1
50 1/4-20 X 3/4” CARRIAGE BOLT 1
60 KNOB 1
70 10-24 X 1-1/4” PHILLIPS HEAD MACHINE
SCREW BZ
2
80 10-24 X 5/8” PHILLIPS HEAD MACHINE
SCREW BZ (NOT SHOWN)
4
90 #10 SAE FLAT WASHER BZ 4
100 NYLON SPACER 2
Figure 2. PAN-1 Lens Support (Top View)
20
60
40
30
and
90
70
10
50


Product specificaties

Merk: Chief
Categorie: Niet gecategoriseerd
Model: Pan-1

Heb je hulp nodig?

Als je hulp nodig hebt met Chief Pan-1 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Niet gecategoriseerd Chief

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd