Chief NS1S2023 Handleiding

Chief Niet gecategoriseerd NS1S2023

Bekijk gratis de handleiding van Chief NS1S2023 (1 pagina’s), behorend tot de categorie Niet gecategoriseerd. Deze gids werd als nuttig beoordeeld door 43 mensen en kreeg gemiddeld 4.7 sterren uit 22 reviews. Heb je een vraag over Chief NS1S2023 of wil je andere gebruikers van dit product iets vragen? Stel een vraag

Download PDF

Pagina 1/1

I N S T A L L A T I O N I N S T R U C T I O N S

Milestone AV Technologies, and its affiliated corporations and subsidiaries (collectively, "Milestone"), intend to make this manual accurate and complete. However, Milestone makes

no claim that the information contained herein covers all details, conditions or variations, nor does it provide for every possible contingency in connection with the installation or use

of this product. The information contained in this document is subject to change without notice or obligation of any kind. Milestone makes no representation of warranty, expressed or

implied, regarding the information contained herein. Milestone assumes no responsibility for accuracy, completeness or sufficiency of the information contained in this document.

Chief, a products division of Milestone AV Technologies

6436 City West Parkway, Eden Prairie, MN 55344

• P: 800.582.6480 / 952.225.6000 • F:877.894.6918 / 952.894.6918

8800-002919 Rev00

www.milestone.com

12/16

NS1S12/20/28/36/41 Side Panels

The NS1S side panels are designed for use with Chief® S1 Series racks. See the specific installation instructions provided with the rack for

additional installation information.

TOOLS REQUIRED / PARTS INCLUDED

WARNING: FAILURE TO READ, THOROUGHLY UNDERSTAND, AND FOLLOW ALL INSTRUCTIONS CAN RESULT IN SERIOUS

PERSONAL INJURY, DAMAGE TO EQUIPMENT, OR VOIDING OF FACTORY WARRANTY! It is the installer’s responsibility to make

sure all components are properly assembled and installed using the instructions provided.

IMPORTANT ! : If installing doors (not included) and side panels on an S1 rack, the doors must be installed before installing

the side panels.

A (1)

[Side panel]

B (4)

5/32" [security]

(included)

1/4-20 x 1-1/4"

C (1)

5/32"

[security]

NS1S Side Panels Installation

1. Align two bottom tabs in side panel (A) with slots in S1 rack. (See

Figure 1)

Figure 1

2. Attach side panel (A) to S1 rack with four 1/4-20 x 1-1/4" security

buttonhead cap screws (B). (See Figure 2)

Figure 2

3. Tighten four screws (B) using the 5/32" security hex wrench (C).

4. Attach additional side panels as required.

(A)

S1 rack

(NS1S1223 rack shown)

(A)

(B) x 4

(NS1S1223 rack shown)

Product specificaties

Merk:	Chief
Categorie:	Niet gecategoriseerd
Model:	NS1S2023
Kleur van het product:	Zwart
Gewicht verpakking:	16780 g
Breedte verpakking:	806.45 mm
Diepte verpakking:	127 mm
Hoogte verpakking:	1188.72 mm
Materiaal behuizing:	Staal
Certificering:	TAA
Aantal per verpakking:	1 stuk(s)
Compatibiliteit:	S1
Rackcapaciteit:	20U