Chief Medium FUSION Handleiding
Chief
Flat panel steun
Medium FUSION
Bekijk gratis de handleiding van Chief Medium FUSION (24 pagina’s), behorend tot de categorie Flat panel steun. Deze gids werd als nuttig beoordeeld door 34 mensen en kreeg gemiddeld 4.8 sterren uit 17.5 reviews. Heb je een vraag over Chief Medium FUSION of wil je andere gebruikers van dit product iets vragen? Stel een vraag
Pagina 1/24

I N S T A L L A T I O N I N S T R U C T I O N S
И Н С Т Р У К Ц И И П О У С Т А Н О В К Е
Instrucciones de instalación
Installationsanleitung
Istruzioni di installazione
Installatie-instructies
MSA MTA
FUSION MEDIUM FLAT PANEL MOUNTS
MSA/MTA Series

MSA/MTA Series Installation Instructions
2
DISCLAIMER
Milestone AV Technologies, and its affiliated corporations and
subsidiaries (collectively "Milestone"), intend to make this
manual accurate and complete. However, Milestone makes no
claim that the information contained herein covers all details,
conditions or variations, nor does it provide for every possible
contingency in connection with the installation or use of this
product. The information contained in this document is subject
to change without notice or obligation of any kind. Milestone
makes no representation of warranty, expressed or implied,
regarding the information contained herein. Milestone assumes
no responsibility for accuracy, completeness or sufficiency of
the information contained in this document.
Chief® is a registered trademark of Milestone AV Technologies.
All rights reserved.
IMPORTANT WARNINGS AND
CAUTIONS!
WARNING: A WARNING alerts you to the possibility of
serious injury or death if you do not follow the instructions.
CAUTION: A CAUTION alerts you to the possibility of
damage or destruction of equipment if you do not follow the
corresponding instructions.
WARNING: Failure to read, thoroughly understand, and
follow all instructions can result in serious personal injury,
damage to equipment, or voiding of factory warranty! It is the
installer’s responsibility to make sure all components are
properly assembled and installed using the instructions
provided.
WARNING: Failure to provide adequate structural strength
for this component can result in serious personal injury or
damage to equipment! It is the installer’s responsibility to
make sure the structure to which this component is attached
can support five times the combined weight of all equipment.
Reinforce the structure as required before installing the
component. The wall to which the mount is being attached
may have a maximum drywall thickness of 5/8" (1.6cm).
WARNING: Exceeding the weight capacity can result in
serious personal injury or damage to equipment! It is the
installer’s responsibility to make sure the combined weight of
all components located between the MSA/MTA up to (and
including) the display does not exceed 125 lbs (56.7 kg) for
dual stud attachment and concrete, and 75 lbs (34.0 kg) for
single stud attachment.

Installation Instructions MSA/MTA Series
3
DIMENSIONS
12.00 304.8
9.58 243.4
.75 19.1
1.50 38.1
25.57 649.5
18.75 476.2
1.50 38.1
.34 8.6
11.00 279.4
16.00 406.4
8.00 203.2
13.50 342.9
4.83 122.6
12°
1.40 35.5
1.06 27
.32
8.1
.38
9.5
16.50
419.1
0
.45 11.5
1.97 50
2.42 61.5
3.94 100
4.39
111.5
5.91 150
6.36
161.5
7.87 200
.45 11.5
1.97 50
2.42 61.5
3.94
NOTES:
MAX MOUNTING PATTERN IS 22"[558.8mm] WITHOUT REVERSING UPRIGHTS.
1. MAX MOUNTING PATTERN IS 26.5"[673.1mm] WITH REVERSING UPRIGHTS.2. FOR RECESSED APPLICATIONS, MINIMUM VERTICAL LIFT FOR HOOK3. ENGAGEMENT IS .56"[14.2mm].
MOUNT RAILS CAN BE SLID LEFT OR RIGHT FOR OFFSET APPLICATIONS.4. MOUNT IS 1.99"[50.5mm] DEEP WHEN FLAT TO WALL.
MTA
DIMENSIONS: [MILLIMETERS]
INCHES
25.57 649.5
18.75 476.2
.75 19.1
1.50 38.1
1.50 38.1
.34 8.6
9.58 243.4
11.00 279.4 13.50 342.9
16.00 406.4
8.00 203.2
1.96 49.8
13.50 342.9
16.78 426.1
.32
8.1
.38
9.6
.65
16.5
.98 25
0
.49
12.5
1.97
50
2.46
62.5
3.94
100
4.43
112.5
5.91 150
6.40
162.5
7.87 200
.49 12.5
1.97 50
2.46 62.5
3.94
NOTES:
MAX MOUNTING PATTERN IS 22.9"[581.6mm] WITHOUT REVERSING UPRIGHTS.
1. MAX MOUNTING PATTERN IS 25.5"[647.7mm] WITH REVERSING UPRIGHTS.2. FOR RECESSED APPLICATIONS, MINIMUM VERTICAL LIFT FOR HOOK3. ENGAGEMENT IS .56"[14.2mm].
MOUNT RAILS CAN BE SLID LEFT OR RIGHT FOR OFFSET APPLICATIONS.4. MOUNT IS 1.96"[49.8mm] DEEP WHEN FLAT TO WALL.
DIMENSIONS: [MILLIMETERS]
INCHES
MSA
Product specificaties
Merk: | Chief |
Categorie: | Flat panel steun |
Model: | Medium FUSION |
Kleur van het product: | Zwart |
Breedte: | 646 mm |
Diepte: | 51 mm |
Hoogte: | 420 mm |
Montagewijze: | Muur |
Maximale gewichtscapaciteit: | 56.7 kg |
Maximale schermgrootte: | 47 " |
Minimale schermgrootte: | 26 " |
Heb je hulp nodig?
Als je hulp nodig hebt met Chief Medium FUSION stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Flat panel steun Chief
7 Mei 2025
2 April 2025
2 April 2025
2 April 2025
2 April 2025
9 Maart 2025
5 Februari 2025
30 Januari 2025
30 Januari 2025
15 Januari 2025
Handleiding Flat panel steun
- Iiyama
- BenQ
- Zaor
- LTN Technologies
- Gembird
- Akai
- SMS Smart Media Solutions
- Anthro
- Atdec
- Pioneer
- V7
- Dataflex
- Speaka
- Blaupunkt
- Samsung
Nieuwste handleidingen voor Flat panel steun
17 Juni 2025
17 Juni 2025
17 Juni 2025
16 Juni 2025
16 Juni 2025
16 Juni 2025
16 Juni 2025
16 Juni 2025
16 Juni 2025
16 Juni 2025