Chief MCD6301 Handleiding

Chief Flat panel steun MCD6301

Lees hieronder de 📖 handleiding in het Nederlandse voor Chief MCD6301 (4 pagina's) in de categorie Flat panel steun. Deze handleiding was nuttig voor 23 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/4

I N S T A L L A T I O N I N S T R U C T I O N S

Medium Flat Panel Interface Bracket

Spanish Product Description

German Product Description

Portuguese Product Description

Italian Product Description

Dutch Product Description

French Product Description

MSB-6301

MSB-6301 Installation Instructions

DISCLAIMER

Milestone AV Technologies and its affiliated corporations and

subsidiaries (collectively "Milestone"), intend to make this

manual accurate and complete. However, Milestone makes no

claim that the information contained herein covers all details,

conditions or variations, nor does it provide for every possible

contingency in connection with the installation or use of this

product. The information contained in this document is subject

to change without notice or obligation of any kind. Milestone

makes no representation of warranty, expressed or implied,

regarding the information contained herein. Milestone assumes

no responsibility for accuracy, completeness or sufficiency of

the information contained in this document.

Chief® is a registered trademark of Milestone AV Technologies.

IMPORTANT WARNINGS AND

CAUTIONS!

WARNING: A WARNING alerts you to the possibility of

serious injury or death if you do not follow the instructions.

CAUTION: A CAUTION alerts you to the possibility of

damage or destruction of equipment if you do not follow the

corresponding instructions.

WARNING: Failure to read, thoroughly understand, and

follow all instructions can result in serious personal injury,

damage to equipment, or voiding of factory warranty! It is the

installer’s responsibility to make sure all components are

properly assembled and installed using the instructions

provided.

WARNING: Failure to provide adequate structural strength

for this component can result in serious personal injury or

damage to equipment! It is the installer’s responsibility to

make sure the structure to which this component is attached

can support five times the combined weight of all equipment.

Reinforce the structure as required before installing the

component. The wall to which the mount is being attached

may have a maximum drywall thickness of 5/8" (1.6cm).

WARNING: Exceeding the weight capacity can result in

serious personal injury or damage to equipment! It is the

installer’s responsibility to make sure the maximum weight

installed on the interface bracket doesn’t exceed 125 lbs

(56.7 kg).

DIMENSIONS

Installation Instructions MSB-6301

TOOLS / PARTS FOR INSTALLATION

ASSEMBLY AND INSTALLATION

NOTE: For use with VESA 100mm x 100mm mountable flat

screens.

1. Insert four #10-24 x 1/2" button head cap screws (C)

through holes on back side of bracket and into four

mounting buttons (D) with chamfered hole of mounting

button (larger surface) facing bracket. Tighten until buttons

are fully secured to bracket. (See Figure 1)

Figure 1

2. Attach bracket to back of display by inserting four

M4 x 20mm Phillips head screws (E) through interface

bracket (A), four nylon spacers (F) and holes on back of

display. (See Figure 2)

NOTE: The vertical slots in bracket may be used for any

necessary height adjustment.

Figure 2

3. Complete the installation following the mount installation

instructions.

1/8"

A (1)

[Interface

Bracket]

D (4)

C (4)

[mounting button]

#10-24 x 1/2"

E (4)

F (4)

.50 x .218 x .25

B (1)

1/8" (included)

M4 x 20mm

(D) x 4

(A)

(E) x 4

(F) x 4

(A)

Display

Product specificaties

Merk:	Chief
Categorie:	Flat panel steun
Model:	MCD6301
Kleur van het product:	Zwart
Breedte:	258 mm
Diepte:	202 mm
Hoogte:	280 mm
Montagewijze:	Plafond
Geschikt voor schermmaten:	30 - 55 "
Maximale gewichtscapaciteit:	56.7 kg
Maximale schermgrootte:	55 "
Minimale schermgrootte:	30 "