Chauvet Ovation FD-105WW Handleiding

Chauvet Spiegelreflexcamera Ovation FD-105WW

Lees hieronder de 📖 handleiding in het Nederlandse voor Chauvet Ovation FD-105WW (20 pagina's) in de categorie Spiegelreflexcamera. Deze handleiding was nuttig voor 33 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/20
Quick Reference Guide
English EN
Español ES
Français FR
Nederlands NL
1
EN
QUICK REFERENCE GUIDE
Ovation FD-105WW QRG Rev. 1
About This Guide
The Ovation FD-105WW Quick Reference Guide (QRG) has basic product information such as connection, mounting,
menu options, and DMX values. Download the User Manual from www.chauvetprofessional.com for more details.
Disclaimer
The information and specifications contained in this QRG are subject to change without notice.
Safety Notes
• DO NOT open this product. It contains no user-serviceable parts.
• To eliminate unnecessary wear and improve its lifespan, during periods of non-use completely disconnect the
product from power via breaker or by unplugging it.
• DO NOT look at the light source when the product is on.
• CAUTION: This product’s housing may be hot when lights are operating.
• Mount this product in a location with adequate ventilation, at least 20 in (50 cm) from adjacent surfaces.
• DO NOT operate this product outdoors or in any location where dust, excessive heat, water, or humidity may affect
it. (IP20)
• DO NOT leave any flammable material within 50 cm of this product while operating or connected to power.
• CAUTION: When transferring product from extreme temperature environments, (e.g., cold truck to warm humid
ballroom) condensation may form on the internal electronics of the product. To avoid causing a failure, allow
product to fully acclimate to the surrounding environment before connecting it to power.
• USE a safety cable when mounting this product overhead.
• DO NOT operate this product if the housing, lenses, or cables appear damaged.
• ONLY connect this product to a grounded and protected circuit.
• ONLY use the hanging/mounting bracket to carry this product.
• In the event of a serious operating problem, stop using immediately.
• The maximum ambient temperature is 113 °F (45 °C). Do not operate this product at higher temperatures.
Contact
Outside the U.S., United Kingdom, Ireland, Mexico, or Benelux, contact your distributor to request support or return a
product. From inside the U.S., UK, Ireland, Mexico, or Benelux, use the information in Contact Us at the end of this QRG.
What is Included
• Ovation FD-105WW
• Neutrik® powerCON® power cord
• Gel Frame (6.25 in/159mm accessories)
• Warranty Card
• Quick Reference Guide
AC Power
This product has a switchable power supply that can work with an input voltage range of 100–240 VAC, 50/60 Hz.
Power Linking
You can link up to 14 Ovation FD-105WW products at 120 VAC or 25 at 230 VAC. Never exceed this number. Power
linking cords can be purchased separately.
Dimmer Control
The Ovation FD-105WW may be plugged into and controlled using a regular dimmer. In this mode, the product reacts
exactly like an incandescent product. See the User Manual to configure Dimmer Control operation.
AC Plug
Replacing The Fuse
1. Disconnect this product from power.
2. Using a Phillips #2 head screwdriver, unscrew the fuse holder cap from the housing.
3. Remove blown fuse and replace with a good fuse of the same type and rating.
4. Screw the fuse holder cap back in place and reconnect power.
Connection Wire (U.S.) Wire (Europe) Screw Color
AC Live Black Brown Yellow/Brass
AC Neutral White Blue Silver
AC Ground Green/Yellow Green/Yellow Green
• To eliminate unnecessary wear and improve its lifespan, during periods of non-use
completely disconnect the product from power via breaker or by unplugging it.
!
EN
2
Ovation FD-105WW QRG Rev. 1
QUICK REFERENCE GUIDE
DMX Linking
The Ovation FD-105WW will work with a DMX controller using a 3-pin or 5-pin DMX serial connection. A DMX Primer is
available from www.chauvetprofessional.com.
DMX Connection
The Ovation FD-105WW uses a 3-pin or 5-pin DMX for its DMX personalities: 1: UNO, 2: DOS, or 3:STD.P. See the User
Manual for information about connecting and configuring the product for DMX operation.
Master/Slave Connection
The Ovation FD-105WW uses the DMX data connection for its Master/Slave mode. See the User Manual for information
about how to connect and configure the product for master/slave operation.
RDM (Remote Device Management)
Remote Device Management, or RDM, is a standard for allowing DMX-enabled devices to communicate bi-directionally
along existing DMX cabling. The Ovation FD-105WW supports RDM protocol that allows feedback to monitor
temperature and changes to DMX Address, , DMX Personality Dimmer Mode, and LED Frequency menu options.
Download the User Manual from www.chauvetprofessional.com for more details.
Dimmer Control
The Ovation FD-105WW may be plugged into and controlled using a regular dimmer. In this mode, the product reacts
exactly like an incandescent product. See the User Manual to configure Dimmer Control operation.
Mounting
Before mounting this product, read the Safety Notes. Use at least one mounting point per product. Make sure the
mounting clamps are capable of supporting the weight of the product. For our Chauvet line of mounting clamps, go to
http://trusst.com/productcategory/truss-clamps/
Product Mounting Diagram
Passcode
After being prompted, enter the following passcode: < >, < >, < >, <UP DOWN UP>, <DOWN ENTER>. This
passcode cannot be changed and must be used whenever prompted.
Mounting Clamp
Overhead Mounting
Safety Cable
Mounting Bracket


Product specificaties

Merk: Chauvet
Categorie: Spiegelreflexcamera
Model: Ovation FD-105WW

Heb je hulp nodig?

Als je hulp nodig hebt met Chauvet Ovation FD-105WW stel dan hieronder een vraag en andere gebruikers zullen je antwoorden