Chapin 84600 Handleiding
Chapin
Niet gecategoriseerd
84600
Bekijk gratis de handleiding van Chapin 84600 (12 pagina’s), behorend tot de categorie Niet gecategoriseerd. Deze gids werd als nuttig beoordeeld door 189 mensen en kreeg gemiddeld 5.0 sterren uit 95 reviews. Heb je een vraag over Chapin 84600 of wil je andere gebruikers van dit product iets vragen? Stel een vraag
Pagina 1/12
DO NOT RETURN THIS BROADCAST HAND SEEDER TO STORE
Call: 800-950-4458 or visit www.chapinmfg.com
WARNING
Please call if you are missing any parts, having trouble 800-950-4458
assembling, or have any questions regarding the safe operation of this
product.
DO NOT RETURN TO THE STORE.
MODEL 84600
Carefully Read These Instructions Before Use 011961 R0713
PROFESSIONAL
BROADCAST HAND SEEDER
1E
WARNING
IMPROPER USE OR FAILURE TO FOLLOW INSTRUCTIONS CAN RESULT IN
PRODUCT FAILURE OR INJURIES. FOR SAFE USE OF THIS PRODUCT YOU MUST
READ AND FOLLOW ALL INSTRUCTIONS BEFORE USING.
ASSEMBLY INSTRUCTIONS
The Chapin 84600 Broadcast hand seeder is preassembled at our factory, leaving only the crank handle for
you to attach. To attach, turn crank handle onto crank shaft in a clockwise motion. There is no need to tighten
the handle, just use your Broadcast hand seeder and it will tighten automatically. This completes the assembly
process. (SEE FIGURE A)
FIGURE A
OPERATING INSTRUCTIONS
1) Identify the appropriate setting for the type of seed you will be spreading using the chart on the following
page (this convenient chart is also located on the underside of your Broadcast Seeder). Line up the Setting
Indicator to the setting required and then use the control lever to lock the setting in place by tightening the
wing nut. (SEE FIGURE B)
2) Make sure the slide Gate is closed before lling seed bag.
3) Fill Broadcaster bag with seed or fertilizer to 1/2 to 3/4 full.
4) Place shoulder strap over shoulder. Place the Broadcast Seeder against hip.
5) Crank the handle maintaining a steady clockwise motion and walk at a consistent pace to spread the seed
evenly. Then open the Slide Gate by pulling back on the setting indicator to the previously adjusted setting.
6) To close the Slide Gate, simply press down on the Control Lever to release.
2E
FIGURE B
Step 1:
Loosen the Wing Nut.
Adjust the Control Lever
to the setting required.
Step 2:
Step 3:
Tighten Wing Nut.
To release, push down
on control Lever.
Setting Indicator
Setting Numbers
Control Lever
Wing Nut
SPREADER SETTINGS:
Model 84600
Material Type
Broadcast Width (ft.) Spreader Setting
Fertilizer
Grass Seed
Granular 8'-10' 3
Pelletized 12'-15' 3.5
Fine 10'-13' 4
Coarse 8'-9' 5
*Debido a las variables implicadas, estos ajustes sirven solo como referencia.
Product specificaties
| Merk: | Chapin |
| Categorie: | Niet gecategoriseerd |
| Model: | 84600 |
Heb je hulp nodig?
Als je hulp nodig hebt met Chapin 84600 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Niet gecategoriseerd Chapin
30 Juni 2025
17 Juni 2025
17 Juni 2025
17 Juni 2025
17 Juni 2025
17 Juni 2025
17 Juni 2025
16 Juni 2025
16 Juni 2025
16 Juni 2025
Handleiding Niet gecategoriseerd
- RCS
- Sera
- Grendel
- Bēm Wireless
- R-Go Tools
- Wabeco
- Revel
- Crest Audio
- Florabest
- Swisson
- Ikelite
- Konig
- Basetech
- Omega
- Ring
Nieuwste handleidingen voor Niet gecategoriseerd
1 Augustus 2025
1 Augustus 2025
1 Augustus 2025
1 Augustus 2025
1 Augustus 2025
1 Augustus 2025
1 Augustus 2025
1 Augustus 2025
1 Augustus 2025
1 Augustus 2025