Chamberlain CIGBU Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor Chamberlain CIGBU (8 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 35 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/8
1
CHAMBERLAIN® INTERNET GATEWAY USER’S GUIDE
Featuring MyQ® Technology
This User’s Guide will help you get the most from your Chamberlain
® MyQ® enabled
products when using a smartphone, tablet, or computer to monitor and control your garage
door opener, gate operator, light controls, or other MyQ
® enabled products.
1 CONNECT & CREATE
See the “Chamberlain MyQ® Quick Start Guide” for instructions for the connection of
your Chamberlain® Internet Gateway to the Internet. You MUST use a computer for
this step; you cannot create an account from a mobile device. Go to
www.mychamberlain.com to create an account and connect the Internet Gateway.
You must have a valid email address to create a Chamberlain
® MyQ® account. Enter
your information and click submit, an email will be sent to you to con rm your valid
email address. If you do not get a con rming email, check your spam email folder or try
creating the account again, being careful to spell the email address correctly.
When the Chamberlain® Internet Gateway powers up, the GREEN LED and BLUE LED
will blink four times to indicate a correct power connection and reset of the Internet
Gateway. After power up, the LEDs will indicate the status of the Chamberlain
® Internet
Gateway. Refer to the “tips” section for details regarding the LED indicators.
If the GREEN LED is off after connecting the Chamberlain
® Internet Gateway to your
router, check the Ethernet cable connection to your router. It must be in the LAN port,
(normally numbered 1 – 4). If the GREEN
LED is still off, try another port on your
router. If you still cannot get a solid GREEN
LED, contact Chamberlain
® Technical
Support at
technical.support@chamberlain.com or at
1-800-528-9131.
If you have additional questions or problems after reviewing
this User’s Guide, please contact Chamberlain® Technical Support
at: technical.support@chamberlain.com or at 1-800-528-9131.
Green LED
Blue LED
2
2
REGISTER CHAMBERLAIN
®
INTERNET
GATEWAY & ADD DEVICES
Once you have successfully created your Chamberlain
® MyQ® account, you must add the
Chamberlain® Internet Gateway to the account. It is easy to do from a computer; this can
also be done from an internet enabled smartphone or tablet. See section 3 for downloading
the MyQ® app and sections 5 and 6 for using the app.
To add the Chamberlain® Internet Gateway to your account, the GREEN LED on the
Internet Gateway must be on continuously. If the GREEN LED is off, see
Section 1, Connect & Create. The Chamberlain
® Internet Gateway must have an
internet connection for the website or phone to nd it.
In the www.mychamberlain.com website, add the Chamberlain
® Internet Gateway.
Click on “Manage Places” to add the Internet Gateway. If this is the fi rst Chamberlain
®
Internet Gateway connected to the account, the screen will already be at the step of
“Register Gateway”. You will need the from the bottom label of SERIAL NUMBER
the Internet Gateway. The serial number is a series of ten characters, 0 – 9 or a – f.
Be sure to use the correct characters (e.g., a zero “0” instead of an “O”) and keep
the character spacing correct (XXXX-XXX-XXX). If this is the second Chamberlain
®
Internet Gateway to be added, just click on “Manage Places>Add New Place”. For
instructions on how to complete this step with the MyQ
® app, see sections 5 and 6.
Name the Chamberlain® Internet Gateway (e.g., “123 Main Street” or “Home Sweet
Home”). Click “Save and Close” to complete this step.
You can add MyQ® devices like the garage door opener, gate operator, lights, or other
accessories from the “Manage Places” page, or you can download the MyQ
® app and
add any MyQ® device from a smartphone or tablet. To add the garage door opener or
other devices, click on “Manage Places>Add New Device” and follow the steps.
Once you click ADD you have 3 minutes to go to the garage door opener or device
and press it’s learn button. To add a gate operator ensure that the gate is closed. Give
the operator an OPEN command. Within 30 seconds, when the gate is at the open
limit press and release the reset button 3 times (on primary gate). The Chamberlain
®
Internet Gateway will pair to the operator.
Once a device is programmed, it will appear on the screen. You can then name the
device (e.g., left garage door, table lamp, etc.).
3
3 GETTING A SMARTPHONE APP
If you have an older OS, the phone or tablet will not be able to
locate the MyQ® app. You may need to upgrade the phone’s
OS to be able to nd, download, and use the MyQ® app.
Smartphone apps are available for Apple
® and Android™ devices:
Apple® iPhone®, iPad®, and iPod Touch®
- Visit the Apple App Store
SM from your Apple device
to download the MyQ® app (search for “MyQ” by The
Chamberlain Group, Inc.).
Android™ smartphones and tablets
- Visit Google Play from your smartphone to download
the MyQ® app (search for “MyQ” by The Chamberlain
Group, Inc.).
BlackBerry®, Windows, and other smartphones
- You can access your MyQ® account to monitor and control your garage door
opener, gate operator, and other MyQ
® accessories on other smartphones by
pointing your phone’s browser to www.mychamberlain.com/mobile.
- Bookmark this page for later use.
- The mobile website has the same functionality as the smartphone apps.
After the app is installed on your smartphone, you
can add a new device to your account by following the
instructions for your smartphone in Sections 5 – 6.


Product specificaties

Merk: Chamberlain
Categorie: Niet gecategoriseerd
Model: CIGBU

Heb je hulp nodig?

Als je hulp nodig hebt met Chamberlain CIGBU stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Niet gecategoriseerd Chamberlain

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd