Casio G-Shock GG-1000-1A5ER Handleiding

Casio Horloge G-Shock GG-1000-1A5ER

Lees hieronder de 📖 handleiding in het Nederlandse voor Casio G-Shock GG-1000-1A5ER (8 pagina's) in de categorie Horloge. Deze handleiding was nuttig voor 30 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/8

Congratulations upon your selection of this CASIO watch.

Applications

This watch has built-in sensors that measure direction and temperature.

Measurement results are indicated by the watch's hands and displays. These features make this watch

useful when hiking, mountain climbing, or when engaging in other such outdoor activities.

Warning!

• The measurement functions built into this watch are not intended for taking measurements that

require professional or industrial precision. Values produced by this watch should be considered

as reasonable representations only.

•

When engaging in mountain climbing or other activities in which losing your way can create a

dangerous or life-threatening situation, always use a second compass to conﬁ rm direction readings.

• Note that CASIO COMPUTER CO., LTD. assumes no responsibility for any damage or loss

suffered by you or any third party arising through the use of your watch or its malfunction.

E E-1

ENGLISH

Important!

• Whenever you use the digital compass of this watch for serious trekking, mountain climbing, or other

activities, always be sure to take along another compass to conﬁ rm readings. If the readings produced

by the digital compass of this watch are different from those of the other compass, perform bidirectional

calibration of the digital compass to ensure more accurate readings.

• Direction readings and digital compass calibration will not be possible if the watch is in the vicinity of a

permanent magnet (magnetic accessory, etc.), metal objects, high-voltage wires, aerial wires, or

electrical household appliances (TV, computer, cellphone, etc.)

E-2

About This Manual

• Depending on the model of your watch, display text appears either as

dark ﬁ gures on a light background, or light ﬁ gures on a dark

background. All examples in this manual are shown using dark ﬁ gures

on a light background.

• Button operations are indicated using the letters shown in the

illustration.

• Note that the product illustrations in this manual are intended for

reference only, and so the actual product may appear somewhat

different than depicted by an illustration.

E-3

Things to check before using the watch

1. Check the Home City and the daylight saving time (DST) setting.

Use the procedure under “To conﬁ gure Home City settings” (page E-13) to conﬁ gure your Home City and

daylight saving time settings.

Important!

Proper World Time Mode data depends on correct Home City, time, and date settings in the Timekeeping

Mode. Make sure you conﬁ gure these settings correctly.

2. Set the current time.

See “Conﬁ guring Current Time and Date Settings” (page E-15).

The watch is now ready for use.

E-4

Contents

About This Manual …………………………………………………………………………………………… E-2

Things to check before using the watch ………………………………………………………………… E-3

Mode Reference Guide ……………………………………………………………………………………… E-7

Timekeeping ………………………………………………………………………………………………… E-12

Conﬁ guring Home City Settings ………………………………………………………………………… E-13

To conﬁ gure Home City settings …………………………………………………………………… E-13

To change the daylight saving time (summer time) setting……………………………………… E-14

Conﬁ guring Current Time and Date Settings ………………………………………………………… E-15

To change the current time and date settings …………………………………………………… E-15

Hand Home Position Adjustment ……………………………………………………………………… E-18

To adjust home positions …………………………………………………………………………… E-18

Using the Digital Compass ……………………………………………………………………………… E-20

To perform a digital compass operation …………………………………………………………… E-20

To perform bidirectional calibration ………………………………………………………………… E-24

To perform magnetic declination correction ……………………………………………………… E-26

To store a direction angle reading in Bearing Memory ………………………………………… E-27

Taking Temperature Readings …………………………………………………………………………… E-32

To take temperature readings ……………………………………………………………………… E-32

To calibrate the temperature sensor ……………………………………………………………… E-34

E-5

Specifying Temperature Unit …………………………………………………………………………… E-35

To specify the temperature unit …………………………………………………………………… E-35

Checking the Current Time in a Different Time Zone ………………………………………………… E-36

To enter the World Time Mode …………………………………………………………………… E-36

To conﬁ gure World Time City and summer time settings ……………………………………… E-36

To swap your Home Time and World Time Cities ……………………………………………… E-38

Using the Stopwatch ……………………………………………………………………………………… E-39

To enter the Stopwatch Mode ……………………………………………………………………… E-39

To perform an elapsed time operation …………………………………………………………… E-39

To pause at a split time ……………………………………………………………………………… E-39

To measure two ﬁ nishes …………………………………………………………………………… E-40

Using the Countdown Timer ……………………………………………………………………………… E-41

To enter the Countdown Timer Mode ……………………………………………………………… E-41

To specify the countdown start time ……………………………………………………………… E-41

To perform a countdown timer operation ………………………………………………………… E-42

To stop the alarm …………………………………………………………………………………… E-42

Using the Alarm …………………………………………………………………………………………… E-43

To enter the Alarm Mode …………………………………………………………………………… E-43

To set an alarm time ………………………………………………………………………………… E-44

To test the alarm …………………………………………………………………………………… E-44

To turn an alarm and the Hourly Time Signal on and off………………………………………… E-45

To stop the alarm …………………………………………………………………………………… E-45

E-6

Illumination ………………………………………………………………………………………………… E-46

To illuminate the display manually ………………………………………………………………… E-46

To change the illumination duration ……………………………………………………………… E-46

To enable or disable auto light……………………………………………………………………… E-48

Button Operation Tone …………………………………………………………………………………… E-50

To enable or disable the button operation tone ………………………………………………… E-50

Low Battery Indication …………………………………………………………………………………… E-51

Troubleshooting …………………………………………………………………………………………… E-52

Speciﬁ cations ……………………………………………………………………………………………… E-55

E-7

Mode Reference Guide

The mode you should select depends on what you want to do.

To do this: Enter this mode: See:

• View the current date in the Home City

• Conﬁ gure Home City and daylight saving time (DST) settings

• Conﬁ gure time and date settings

Timekeeping Mode E-12

• Determine north and the bearing to a destination

• Record a bearing (Bearing Memory)

• Determine your current location using the watch and a map

Digital Compass Mode E-20

Determine the temperature at your current location Thermometer Mode E-32

View the current time in one of 48 cities (31 time zones) around the globe World Time Mode E-36

Use the stopwatch to measure elapsed time Stopwatch Mode E-39

Use the countdown timer Countdown Timer Mode E-41

• Set an alarm time

• Turn the hourly time signal on or off Alarm Mode E-43

Operation Guide 5476

E-8

Selecting a Mode

• The illustration below shows which buttons you need to press to navigate between modes.

• To return to the Timekeeping Mode from any other mode, hold down D for about two seconds.

Stopwatch Mode

Countdown Timer Mode

World Time Mode

Alarm Mode

E-9

• The mode dial hand indicates the watch’s current mode.

Timekeeping Mode

Thermometer Mode

Digital Compass Mode

Mode dial hand

E-10

General Functions (All Modes)

The functions and operations described in this section can be used in all of the modes.

Direct Timekeeping Mode Access

• To enter the Timekeeping Mode from any other mode, hold down

D for about two seconds.

Auto Return Features

• The watch will automatically return to the Timekeeping Mode if you do not perform any button operation

for a particular amount of time in each mode.

Mode Name Approximate Elapsed Time

Alarm, Digital Compass 3 minutes

Thermometer 1 to 2 minutes

Setting screen (digital setting ﬂ ashing) 3 minutes

Initial Screens

When you enter the Alarm, World Time, or Digital Compass Mode, the data you were viewing when you

last exited the mode appears ﬁ rst.

Scrolling

The E and B buttons are used on the setting screen to scroll through data on the display. In most

cases, holding down these buttons during a scroll operation scrolls through the data at high speed.

E-11

Digital Meter

• The digital meter indicates the seconds count in the Timekeeping Mode (page E-12), World Time Mode

(page E-36), and Timer Mode (page E-41). In the Stopwatch Mode (page E-39) it indicates the 1/10-second count.

• While viewing bearing memory contents in the Digital Compass mode (page E-20), the digital meter shows

a bearing pointer.

Digital Meter

E-12

Timekeeping

Use the Timekeeping Mode to set and view the current time and date.

• Each press of A in the Timekeeping Mode will change screen contents as shown below.

Mode dial hand

Day of week

Second hand

Minute hand PM indicator Seconds

Hour : Minutes

Hour hand

Month Day

Digital meter

Date Screen Time Screen

E-13

Conﬁ guring Home City Settings

There are two Home City settings: actually selecting the Home City and selecting either standard time or

daylight saving time (DST).

To conﬁ gure Home City settings

1. In the Timekeeping Mode, hold down A until ADJ appears in the

lower display.

• When you release A (after ADJ appears), SET will be ﬂ ashing in

the upper display. This is the setting mode.

• The watch will exit the setting mode automatically if you do not

perform any operation for about two or three minutes.

2. Use E (East) and B (West) to scroll through the available city codes.

• For details about city codes, see the “City Code Table” at the back

of this manual.

3. Press D.

• This will cause DST to appear in the upper display and the DST

setting of the currently selected Home City to appear in the lower

display.

4. Press E to toggle the DST setting between daylight saving time (

ON)

and standard time (

OFF ).

• Note that you cannot switch between standard time and daylight

saving time (DST) while UTC is selected as your Home City.

City code

DST indicator

E-14

5. After all of the settings are the way you want, press A to exit the setting screen.

• The DST indicator appears to indicate that daylight saving time is turned on.

Note

• After you specify a city code, the watch will use UTC* offsets in the World Time Mode to calculate

the current time for other time zones based on the current time in your Home City.

* Coordinated Universal Time, the world-wide scientiﬁ c standard of timekeeping.

The reference point for UTC is Greenwich, England.

To change the daylight saving time (summer time) setting

1. In the Timekeeping Mode, hold down A until ADJ appears in the

lower display.

• When you release A (after ADJ appears), SET will be ﬂ ashing in

the upper display.

2. Press D.

• This will cause DST to appear in the upper display and the DST

setting of the currently selected Home City to appear in the lower

display.

3. Press E to toggle the DST setting between daylight saving time (

ON ) and standard time (OFF).

4. After all of the settings are the way you want, press A to exit the setting screen.

• The DST indicator appears to indicate that daylight saving time is turned on.

E-15

Conﬁ guring Current Time and Date Settings

You can use the procedure below to adjust the Timekeeping Mode time and date settings if they are off.

Changing the digital Home City data should cause the analog time setting to change accordingly. If the

analog time does not indicate the digital time, check the home positions of the hands and make

adjustments if necessary (page E-18).

To change the current time and date settings

1. In the Timekeeping Mode, hold down A until ADJ appears in the

lower display.

• When you release A (after ADJ appears), SET will be ﬂ ashing in

the upper display.

City code

Operation Guide 5476

E-16

2. Press D to move the ﬂ ashing in the sequence shown below to select the other settings.

City Code

(page E-13)

DST

(page E-14) 12/24-Hour Format Seconds Hour Minutes

Illumination Duration

(page E-46)

Button Operation Tone On/Off

(page E-50) Day Month Year

3. When the timekeeping setting you want to change is ﬂ ashing, use E and/or B to change it as

described below.

Screen To do this: Do this:

Change the city code See page E-13.

Toggle between daylight saving time (

) and

standard time (

OFF). See page E-13.

Toggle between 12-hour (

12H) and 24-hour (24H)

timekeeping. Press E.

Reset the seconds to

(If the current seconds count is between 30 and 59,

one is added to the minute count).

Press E.

Change the hour or minutes Use E (+) and B (–).

Change the year, month, or day

E-17

4. After all of the settings are the way you want, press A to exit the setting screen.

Note

• For information about selecting a Home City and conﬁ guring the DST setting, see “Conﬁ guring

Home City Settings” (page E-13).

• While the 12-hour format is selected for timekeeping, a P (PM) indicator will appear for times from

noon to 11:59 p.m. No indicator appears for times from midnight to 11:59 a.m. With 24-hour format,

time is displayed from 0:00 to 23:59, without any P (PM) indicator.

• The watch’s built-in full automatic calendar makes allowances for different month lengths and leap

years. Once you set the date, there should be no reason to change it except after you have the

watch’s battery replaced.

• The day of the week changes automatically when the date changes.

• Refer to the pages shown below for more information on Timekeeping Mode settings.

- Button operation tone on/off: “To enable or disable the button operation tone” (page E-50)

- Illumination duration setting: “To change the illumination duration” (page E-46)

E-18

Hand Home Position Adjustment

Strong magnetism or impact can cause the hands of the watch to go out of alignment.

• Home position adjustment is not necessary when the analog time and digital time are the same time in

the Timekeeping Mode.

To adjust home positions

1. In the Timekeeping Mode, hold down A and keep it depressed for

about ﬁ ve seconds until H.SET appears on the lower display.

• When you release A after H.SET appears, the second hand will

move to 12 o’clock. This indicates the second hand home position

adjustment mode.

• Though ADJ will appear in the lower display about two seconds

after you hold down A, do not release the button yet. Keep it

depressed until H.SET appears.

• Use the D button to select a hand for adjustment. Each press of

D cycles in sequences from the second hand, to the hour and minute

hands, and then the mode dial hand. Selecting a hand causes it to

move to 12 o’clock and the content of the upper display changes

as shown in the table below.

Upper display Selected hand

Flashing 00 Second hand

Flashing 0:00 Hour and minute hands

Flashing Sub Mode dial hand

• If the selected hand does not move exactly to 12 o’clock, perform step 2 below to adjust it.

E-19

• The watch will return to regular timekeeping automatically if you do not perform any operation for

about two or three minutes. Any changes you have made to settings up to that point will be saved.

2. Use E (+) and B (–) to adjust the position of the currently selected hand.

• Holding down either button will cause the hand to move at high speed. Once started, high-speed

hand movement will continue even if you release the button. To stop high-speed hand movement,

press any button.

• The second hand and mode dial hand will automatically stop high-speed movement after they

complete one revolution. The minute hand will stop automatically after 12 revolutions.

3. Press A to exit home position correction and return to regular timekeeping.

Note

After performing home position adjustment, enter the Timekeeping Mode and check to make sure that the

analog hands and the upper display indicate the same time. If they do not, perform home position

adjustment again.

E-20

Using the Digital Compass

You can use the Digital Compass Mode to determine the direction of north, and to check your bearing to a

destination.

• For information about what you can do to improve digital compass reading accuracy, see “Calibrating

the Bearing Sensor” (page E-23) and “Digital Compass Precautions” (page E-30).

To perform a digital compass operation

1. Place the watch on a ﬂ at surface. If you are wearing the watch, make sure that your wrist is horizontal

(in relation to the horizon).

2. Point the 12 o’clock position of the watch in the direction you want to check.

3. In any mode (except a setting mode), press C to perform a digital compass operation.

• This will cause the mode dial hand to move to COMP.

• COMP will appear in the lower display to indicate that a digital compass operation is in progress.

• After about two seconds, the second hand will point in the direction of magnetic north, and the

display will show the direction or the bearing angle that 12 o’clock is pointed.

E-21

315°

0°

North

Bearing to Objective:

Northwest

N: North

E: East

W: West

S: South

Objective

Bearing Angle Meaning

Bearing Angle to Objective

• See “Digital Compass Readings” (page E-22) for information about how direction readings are

indicated by the watch.

Note

• If there is an angle value in the lower display, it means that the bearing memory record (page E-27) is

displayed. If this happens, press

E to exit the bearing memory record.

4. To return to the mode you were in immediately before entering the Digital Compass Mode, press

To enter the Timekeeping Mode, hold down D for at least two seconds.

E-22

Digital Compass Readings

• When you press C to start a digital compass operation, COMP will initially appear on the lower

display. About two seconds after you start a digital compass operation, an indicator will appear in the

lower display to indicate what direction the 12 o’clock position of the watch is pointed. The second

hand will point to magnetic north.

• After the ﬁ rst reading is obtained, the watch will continue to take digital compass readings automatically

each second for up to 20 seconds. After that, the digital compass operation will stop automatically.

• The direction indicator and angle value will show

- - -

to indicate that the digital compass operation is

complete.

• Auto light is disabled during the 20 seconds that digital compass readings are being taken.

• The following table shows the meanings of each of the direction abbreviations that appear on the lower

display.

Direction Meaning Direction Meaning Direction Meaning Direction Meaning

NNorth NNE North-

northeast NE Northeast ENE East-

northeast

EEast ESE East-

southeast SE Southeast SSE South-

southeast

SSouth SSW South-

southwest SW Southwest WSW West-

southwest

WWest WNW West-

northwest NW Northwest NNW North-

northwest

• The margin of error for the angle value and the direction indicator is ±15 degrees while the watch is

horizontal (in relation to the horizon). If the indicated direction is northwest (

NW) and 315 degrees, for

example, the actual direction can be anywhere from 300 to 330 degrees.

E-23

• Note that performing a digital compass operation while the watch is not horizontal (in relation to the

horizon) can result in large error.

• You can calibrate the bearing sensor if you suspect the direction reading is incorrect.

• Any ongoing digital compass operation is paused temporarily while the watch is performing an alert

operation (daily alarm, Hourly Time Signal, countdown timer alarm) or while illumination is turned on (by

pressing B). The digital compass operation resumes for its remaining duration after the operation that

caused it to pause is ﬁ nished.

• See “Digital Compass Precautions” (page E-30) for important information about taking direction readings.

• The direction indicated by the Digital Compass is magnetic north.

You can use Magnetic Declination Correction to conﬁ gure the watch to indicate true north, if you want.

For details, see “Magnetic Declination Correction” below, “To perform magnetic declination correction”

(page E-26), and “Magnetic North and True North” (page E-30).

Calibrating the Bearing Sensor

You should calibrate the bearing sensor whenever you feel that the direction readings being produced by

the watch are off. You can use any one of two different bearing sensor calibration methods: bidirectional

calibration or magnetic declination correction.

• Bidirectional Calibration

Bidirectional calibration calibrates the bearing sensor in relation to magnetic north. Use bidirectional

calibration when you want to take readings within an area exposed to magnetic force. This type of

calibration should be used if the watch becomes magnetized for any reason.

Important!

• To ensure correct direction readings by the digital compass, be sure to perform bidirectional calibration

before using it. The digital compass may produce incorrect direction readings if you do not perform

bidirectional calibration.

Operation Guide 5476

Product specificaties

Merk:	Casio
Categorie:	Horloge
Model:	G-Shock GG-1000-1A5ER

Heb je hulp nodig?

Als je hulp nodig hebt met Casio G-Shock GG-1000-1A5ER stel dan hieronder een vraag en andere gebruikers zullen je antwoorden

Uw naam*

Jouw email*

Schrijf hier uw vraag

Handleiding Horloge Casio

Casio G-Shock GMA-S130 Handleiding

20 April 2024

Casio vEdifice EFV-C110 Handleiding

20 April 2024

Casio Edifice EFB-508 Handleiding

20 Maart 2024

Casio Vintage A158WEA-9 Handleiding

16 Maart 2024

Casio Vintage A100WEPC-1B Handleiding

16 Maart 2024

Casio Vintage A158WA-1J Handleiding

16 Maart 2024

Casio Vintage A120WE-1A Handleiding

16 Maart 2024

Casio Vintage A159WA-N1 Handleiding

16 Maart 2024

Casio Vintage A100WEL-1A Handleiding

16 Maart 2024

Casio Vintage A100WEF Handleiding

16 Maart 2024

Handleiding Horloge

Nieuwste handleidingen voor Horloge

Timberland Tilden TBL.14644 Handleiding

21 April 2024

Timberland Tilden TBL.15247 Handleiding

21 April 2024

Citizen Promaster Diver EO2028-06L Handleiding

10 April 2024

Citizen Sport Automatic NH7530-52L Handleiding

10 April 2024

Citizen Promaster AIR Automatic GMT NB6046-59E Handleiding

10 April 2024

Citizen Perpetual Calendar BL5421-01E Handleiding

10 April 2024

Citizen Limited Edition AQ4103-16E Handleiding

10 April 2024

Citizen Promaster Altichron BN4065-07L Handleiding

10 April 2024

Citizen Promaster Aqualand BN2038-01L Handleiding

10 April 2024

Citizen Attesa Satellite Wave GPS CC4055-65E Handleiding

10 April 2024