Casio DQ-543B Handleiding

Casio Klok DQ-543B

Lees hieronder de 📖 handleiding in het Nederlandse voor Casio DQ-543B (2 pagina's) in de categorie Klok. Deze handleiding was nuttig voor 25 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/2

USER’S GUIDE PQ-30/31 DQ-543/583

TO SET THE TIME

1. Slide the selector to TM SET (TIME SET).

2. Press HR MIN to increase the hour digits and to increase the minutes digits. Holding down either button changes its setting at high speed.

• .Though the seconds are not displayed, they reset to 00 when you press MIN

3. After you set the time, change the selector to NORM (NORMAL).

USING THE ALARM

The alarm of this clock features a Snooze Function, which lets you catch a few more minutes sleep in the morning.

To set the alarm time

1. Slide the selector to AL SET (ALM SET).

2. Press HR MIN to increase the hour digits and to increase the minutes digits. Holding down either button changes its setting at high speed.

3. After you set the alarm time, change the selector to NORM (NORMAL).

To turn the alarm on and off

Slide the selector to position to switch the alarm on, or to SNZ (SNOOZE) or AL ON (ALM ON) AL OFF (ALM OFF) position to switch it off.

To use the alarm

1. Set the alarm time and switch the alarm on.

2. When the alarm time you set is reached, the alarm starts to sound. When alarm is sounding, press the button to stop it. When the snooze feature isSNOOZE/LIGHT

turned on, the alarm will sound again in about 8 minutes.

• You can stop the repeating alarm at any time by sliding the selector to AL OFF (ALM OFF) position.

To view the current alarm time setting

1. Slide the selector to NORM (NORMAL).

2. Press HR MIN or to display the currently alarm time setting.

To test the alarm

1. Slide the selector to SNZ (SNOOZE) or AL ON (ALM ON).

2. Press HR MIN and at the same time to sound the alarm.

TO ILLUMINATE THE DISPLAY

Hold down the button to illuminate the display.SNOOZE/LIGHT

BATTERY REPLACEMENT

Replace batteries whenever the display of the clock becomes dim and difficult to read.

1. Pressing down lightly on the battery compartment cover, slide it in the direction indicated by the arrow and remove it.

2. Remove both old batteries.

3. Load new batteries. Make sure that their positive (+) and negative (–) ends face in the correct directions. If you load batteries incorrectly they can burst and damage

the clock.

4. Replace the battery compartment cover.

Battery precautions

•Be sure to load the batteries with their positive (+) and negative (–) ends facing correctly.

•Replace the batteries at least once a year, even if the current batteries are working properly.

•Never charge the batteries that come with the clock.

•Should the batteries ever leak while in the clock, wipe out the fluid with a cloth, taking care not to let any get onto your skin.

•The batteries that come with the clock lose some of their power during transport and storage.

•Never mix old and new batteries, or batteries of different brands.