Casio DQ-542 Handleiding

Casio Klok DQ-542

Lees hieronder de đź“– handleiding in het Nederlandse voor Casio DQ-542 (2 pagina's) in de categorie Klok. Deze handleiding was nuttig voor 32 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/2
Operation Guide DQ-542/542B
1
MA0508-EB
ILLUSTRATION
•A sticker is affixed to the glass of the clock when you purchase it. Be sure to remove the sticker before using the
clock.
•Depending on the clock model, its configuration may differ somewhat from that shown in the illustration.
Current time
(Hour, minutes)
Date
(month – day)
PM indicator Alarm time
Alarm on indicator
Alarm Off Snooze Alarm OnAlarm On
Snooze on indicator
Alarm on indicator
GENERAL GUIDE
11
11
1SNOOZE/LIGHT button
•Press this button to illuminate the display for about three seconds.
•Pressing this button while the alarm is sounding stops the alarm.
22
22
212 • 24/YEAR button
•Press this button to toggle between 12-hour and 24-hour timekeeping.
•Pressing this button while “CALENDAR” is selected by the Mode switch 5 advances the year setting.
33
33
3MIN/DATE button
•Pressing this button while “TM” is selected by the Mode switch 5 advances the minute setting.
•Pressing this button while “CALENDAR” is selected by the Mode switch 5 advances the day setting.
44
44
4HR/MONTH button
•Pressing this button while “TM” is selected by the Mode switch 5 advances the hour setting.
•Pressing this button while “CALENDAR” is selected by the Mode switch 5 advances the month setting.
55
55
5Mode switch
NORMAL: For normal use
AL: For adjusting the alarm setting
TM: For adjusting the time setting
CALENDAR: For adjusting the date setting
66
66
6Alarm Mode selector
SNZ: Snooze alarm on
ON: Alarm on
OFF: Alarm off
77
77
7Battery
SETTING THE CLOCK
1. Slide the Mode switch 5 to “TM”. This
causes the current time to flash on the
display.
2. Use the 12 • 24/YEAR button 2, MIN/
DATE button 3, and HR/MONTH
button 4 to set the time. Holding down
the MIN/DATE button 3 or HR/
MONTH button 4 changes the
corresponding setting at high speed.
•Make sure you set the correct am/pm
time if you are using 12-hour
timekeeping. The PM indicator indicates
PM times, while nothing is indicated for
AM times.
•The seconds count reverts to 00
automatically whenever you finish
adjusting the minute setting.
3. Slide the Mode switch 5 to
“CALENDAR”. This causes the current
date to flash on the display.
4. Use the 12 • 24/YEAR button 2, MIN/
DATE button 3, and HR/MONTH
button 4 to set the date. Holding down
any button advances the corresponding
setting at high speed.
•You can set the year in the range of 2004
to 2039.
5. Slide the Mode switch 5 to “NORMAL”. This will cause the figures on the display to
stop flashing.
PM indicator
Hour Minutes
Press to toggle between
12-hour and 24-hour
timekeeping.
Press to advance the
minute setting.
Press to advance the
hour setting.
Year
Month Day
Press to advance the
year setting.
Press to advance the
day setting.
Press to advance the
month setting.
Operation Guide DQ-542/542B
2
Hour Minutes
Press to toggle between
12-hour and 24-hour
timekeeping.
Press to advance the
alarm time minute
setting.
Press to advance the
alarm time hour
setting.
USING THE ALARM
The alarm sounds when the current time reaches the alarm time. The face illuminates for the first 5 seconds of the
alarm operation as well. The alarm tone alternates between three levels.
You can also use the Alarm Mode selector 6 to select the snooze alarm feature.
Setting the Alarm Time
1. Slide the Mode switch 5 to “AL”. This
causes the alarm time setting to flash
on the display.
2. Use the 12 • 24/YEAR button 2, MIN/
DATE button 3, and HR/MONTH
button 4 to set the alarm time. Holding
down the MIN/DATE button 3 or HR/
MONTH button 4 changes the
corresponding setting at high speed.
•Make sure you set the correct am/pm
time if you are using 12-hour
timekeeping. The PM indicator indicates
PM times, while nothing is indicated for
AM times.
3. Slide the Mode switch 5 to “NORMAL”. This will cause the figures
on the display to stop flashing.
4. Turning the Alarm On and Off
Use the Alarm Mode selector 6 on the top of the clock to turn the
alarm on and off, and to select the snooze feature.
•The light also turns on for the first five seconds that the alarm sounds.
Stopping the Alarm
•When alarm is sounding, press the SNOOZE/LIGHT button 1 to stop it. When the snooze feature is turned on,
the alarm will sound again in about five minutes.
•To turn off the snooze feature, slide the Alarm Mode selector 6 to OFF.
Testing the alarm
•While the mode switch setting is “NORMAL”, hold down the HR/MONTH button 4 and MIN/DATE button 3 at
the same time to sound the alarm. All of the display’s digital segments will appear at this time. Release the
buttons to stop the alarm.
Alarm Mode selector Description
The alarm sounds at the preset time for one minute. You can stop the alarm by
pressing the SNOOZE/LIGHT button 1. The snooze feature will cause the alarm to
sound again about five minutes after it stops. A indicator flashes on the display
during the period between alarms.
•
If you keep stopping the alarm manually by pressing the SNOOZE/LIGHT button
11
11
1
The alarm will sound again, about five minutes after you stop it.
•If the alarm is not stopped manually
The alarm will sound three times for one minute, at five-minute intervals. After that the
snooze feature will be cancelled automatically.
The alarm sounds at the preset time for one minute.
The alarm does not sound.
SNZ
ON
OFF
USING THE LIGHT
Hold down the SNOOZE/LIGHT button 1 to illuminate the display. The light will go out automatically after about
three seconds, even if you keep the button depressed.
Important!
•Overuse of the light can shorten battery life.
BATTERY REPLACEMENT
Replace the battery whenever the display of the clock becomes dim and difficult to read.
1. Open the battery compartment cover as shown in the illustration.
2. Remove the old battery.
3. Load a new battery. Make sure that the positive (+) and negative (–) ends of the battery are facing correctly. An
incorrectly loaded battery can burst and damage the clock.
4. Replace the battery compartment cover.
Battery precautions
•Keep batteries out of the reach of small children. If a battery is swallowed accidentally, contact your physician
immediately.
•Be sure to load the battery with its positive (+) and negative (–) ends facing correctly.
•Never charge the battery that comes with the clock.
•Should a battery ever leak while in the clock, wipe out the fluid with a cloth, taking care not to let any get onto
your skin.
•Replace the battery at least once a year, even if the current battery is working properly.
•The battery that comes with the clock loses some power during transport and storage.


Product specificaties

Merk: Casio
Categorie: Klok
Model: DQ-542

Heb je hulp nodig?

Als je hulp nodig hebt met Casio DQ-542 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Klok Casio

Casio

Casio DQ-981 Handleiding

15 Augustus 2022
Casio

Casio DQ-980 Handleiding

16 Augustus 2022
Casio

Casio DQ-745S Handleiding

17 Augustus 2022
Casio

Casio DQD-120B Handleiding

16 Augustus 2022
Casio

Casio DQ-982N Handleiding

16 Augustus 2022
Casio

Casio DQD-105 Handleiding

16 Augustus 2022
Casio

Casio DQ-747 Handleiding

16 Augustus 2022
Casio

Casio DQ-970 Handleiding

16 Augustus 2022
Casio

Casio DQ-950S Handleiding

15 Augustus 2022
Casio

Casio DQ-542 Handleiding

2 September 2022

Handleiding Klok

Nieuwste handleidingen voor Klok