Casio Collection AE-1400WH-3AVEF Handleiding

Casio Horloge Collection AE-1400WH-3AVEF

Lees hieronder de 📖 handleiding in het Nederlandse voor Casio Collection AE-1400WH-3AVEF (5 pagina's) in de categorie Horloge. Deze handleiding was nuttig voor 18 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/5
Operation Guide 3458
E-9
Switching Between Time Screens
Each press of D cycles the time screens in the sequence shown below.
D D D
D
Displayed for one second.
A
E-8
Timekeeping
The Timekeeping Mode’s Multi Time feature gives you
quick and easy access to the current time and date in four
different cities, numbered from T-1 (Time 1) through T-4
(Time 4). T-1 is your Home City Time, and T-2, T-3, and
T-4 are Local Times. Local Times are kept in
synchronization with your Home City Time (T-1).
The digital dial at the top of the screen indicates the
current Home City Time (T-1). For details on reading the
map and digital dial, see “Map and Digital Dial” (page
E-32).
PM indicator
Digital dial
Map
Seconds
Month – Day
Day of week
Hour : Minutes
E-7
Alarm Mode Countdown Timer
Mode
Stopwatch Mode
E-6
General Guide
Press C to change from mode to mode.
In any mode, press L to illuminate the display.
Timekeeping Mode World Time Mode
Press C.
E-5
Specifications …………………………………………………………………………E-38
E-4
Alarms ……………………………………………………………………………………E-21
To set an alarm time ……………………………………………………………E-22
To test the alarm ………………………………………………………………E-24
To turn an alarm on and off ……………………………………………………E-25
To turn the Hourly Time Signal on and off ……………………………………E-26
Countdown Timer………………………………………………………………………E-27
To configure the countdown timer ……………………………………………E-28
To use the countdown timer …………………………………………………E-29
Stopwatch ………………………………………………………………………………E-30
To measure times with the stopwatch ………………………………………E-31
Reference ………………………………………………………………………………E-32
To turn the button operation tone on and off …………………………………E-34
To turn off Auto Display ………………………………………………………E-37
To turn on Auto Display ………………………………………………………E-37
E-3
Contents
About This Manual …………………………………………………………………… E-1
General Guide ………………………………………………………………………… E-6
Timekeeping …………………………………………………………………………… E-8
To toggle the Timekeeping Mode time between DST and
Standard Time ………………………………………………………………E-14
To turn on illumination …………………………………………………………E-17
World Time ………………………………………………………………………………E-18
To view the time for another city code ………………………………………E-18
To toggle a city code time between Standard Time and
Daylight Saving Time ………………………………………………………E-19
To change your Home Time city to the current World Time city …………E-20
E-2
Note that the product illustrations in this manual are intended for reference only,
and so the actual product may appear somewhat different than depicted by an
illustration.
E-1
About This Manual
Depending on the model of your watch, digital display
text appears either as dark figures on a light
background, or light figures on a dark background. All
examples in this manual are shown using dark figures
on a light background.
Button operations are indicated using the letters shown
in the illustration.
Each section of this manual provides you with the
information you need to perform operations in each
mode. Further details and technical information can be
found in the “Reference” section.
MO1709-EA © 2017 CASIO COMPUTER CO., LTD.
Operation Guide 3458
E-19
To toggle a city code time between Standard Time and Daylight Saving Time
1. In the World Time Mode, use D (east) or
B (west) to
display the city code (time zone) whose Standard Time/
Daylight Saving Time setting you want to change.
2. Hold down A for about one second to toggle Daylight
Saving Time ( displayed) and Standard Time ( DST DST
not displayed).
The DST indicator is on the display whenever you
display a city code for which Daylight Saving Time is
turned on.
Note that the DST/Standard Time setting affects only
the currently displayed city code. Other city codes
are not affected.
Note that you cannot switch between Standard Time
and Daylight Saving Time while UTC is selected as
the city code.
DST indicator
E-18
World Time
World Time shows the current time in 48 cities (31 time
zones) around the world.
All of the operations in this section are performed in the
World Time Mode, which you enter by pressing
C
(page E-6).
To view the time for another city code
In the World Time Mode, press
D to scroll eastwardly
through city codes, or B to scroll westwardly.
For full information about city codes, see the “City Code
Table” at the back of this manual.
If the current time for a city is wrong, check your
Timekeeping Mode time and time zone settings and
make the necessary changes.
City code
Current time and date in
the zone of the selected
city code
E-17
Illumination
An LED (light-emitting diode) illuminates the display for easy reading in the dark.
Illumination Precautions
The illumination provided by the light may be hard to see when viewed under direct
sunlight.
Illumination automatically turns off whenever an alarm sounds.
Frequent use of illumination runs down the battery.
To turn on illumination
In any mode, press L to turn on illumination.
You can use the procedure above to select either 1.5 seconds or 3 seconds as the
illumination duration. When you press L, the illumination will remain on for about
1.5 seconds or 3 seconds, depending on the current illumination duration setting.
E-16
4. Press D to toggle between Daylight Saving Time ( displayed) and Standard
Time ( displayed).
5. After the settings are the way you want, press
A.
Changing Your Home City Time
Use the following procedure to change your current Home City Time to any one of the
three Local Times.
1. In the Timekeeping Mode, press
D to display the Local Time which you want to
make your Home City Time.
2. Press A and B at the same time.
This makes the Local Time you selected in step 1 your new Home City Time.
E-15
12/24-Hour Format
With the 12-hour format, the PM indicator appears to the left of the hour digits for
times in the range of noon to 11:59 p.m. and no indicator appears to the left of the
hour digits for times in the range of midnight to 11:59 a.m.
With the 24-hour format, times are displayed in the range of 0:00 to 23:59, without
any indicator.
The 12-hour/24-hour timekeeping format you select in the Timekeeping Mode is
applied in all other modes.
Changing the City Setting of a Local Time
You can select any one of the city codes in the table at the back of this manual as a
Local Time city.
1. Display the Local Time whose city setting you want to change, and then hold down
A for about two seconds until the current city code starts to flash.
2. Use D (east) and B (west) to select the city code you want.
3. Press C to display the DST setting screen.
E-14
To toggle the Timekeeping Mode time between DST and Standard Time
1. Use D to display the current Home City Time (T-1)
screen.
2. Hold down A until the seconds start to flash, which
indicates the setting screen.
3. Press C to display the DST setting screen.
4. Press D to toggle between Daylight Saving Time
( displayed) and Standard Time ( displayed).
5. Press A to exit the setting screen.
The DST
indicator appears on the Timekeeping
screen to indicate that Daylight Saving Time is turned
on.
DST indicator
E-13
5. Press A to exit the setting screen.
The day of the week is displayed automatically in accordance with the date
(year, month, and day) settings.
Daylight Saving Time (DST)
Daylight Saving Time (summer time) advances the time setting by one hour from
Standard Time. Remember that not all countries or even local areas use Daylight
Saving Time.
E-12
Screen To do this: Do this:
Reset the seconds to . Press
D.
Toggle between Daylight Saving Time ( ) and
Standard Time ( ). Press D.
Change the city code. Use
D (east) and B (west).
Change the hour or minutes. Use
D (+) and B (–).
Toggle between 12-hour ( ) and 24-hour ( )
timekeeping. Press D.
Change the year. Use
D (+) and B (–).
Change the month or day. Use
D (+) and B (–).
Toggle the setting between 1.5 seconds ( ) and
3 seconds ( ). Press D.
See “Daylight Saving Time (DST)” on page E-13 for details about DST setting.
E-11
Changing the Current Home City Time and Date Settings
1. Use D to display the current Home City Time (T-1)
screen.
2. Hold down A until the seconds start to flash, which
indicates the setting screen.
3. Press C to move the flashing in the sequence shown
below to select other settings.
Seconds Minutes
12/24-Hour
Format
Illumination
Duration Setting
City CodeDST Hour
YearMonthDay
4. When the setting you want to change is flashing, use
D and B to change it as
described below.
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
E-10
While the Home City Time (T-1) screen is displayed, pressing A will switch the day
of the week / month-day indication to the currently selected Home City code and
the T-1 indicator for about one second.
You can change the current time setting for your Home City Time (T-1) only.
For Local Times (T-2, T-3, T-4), you can change the city code and DST settings
only.
Operation Guide 3458
E-29
To use the countdown timer
Press D while in the Countdown Timer Mode to start the
countdown timer.
When the end of the countdown is reached, the alarm
sounds for ten seconds or until you stop it by pressing
any button. The countdown time is reset to its starting
value automatically after the alarm operation ends.
Press D while a countdown operation is in progress to
pause it. Press D again to resume the countdown.
To stop a countdown operation completely, first pause
it (by pressing D), and then press B. This returns the
countdown time to its starting value.
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
E-28
To configure the countdown timer
1. While the countdown start time is on the display in the
Countdown Timer Mode, hold down A until the current
countdown start time starts to flash, which indicates the
setting screen.
2. Press C to move the flashing in the sequence shown
below to select other settings.
Seconds
MinutesHours
3. When the setting you want to change is flashing, use
D (+) and B (–) to change
the flashing item.
To specify a countdown start time of 24 hours, set .
4. Press A to exit the setting screen.
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
E-27
Countdown Timer
The countdown timer can be set within a range of one
second to 24 hours. An alarm sounds when the
countdown reaches zero.
All of the operations in this section are performed in the
Countdown Timer Mode, which you enter by pressing
C (page E-7).
Seconds
Hours
Minutes
1/10 second
E-26
To turn the Hourly Time Signal on and off
1. In the Alarm Mode, use D to select the Hourly Time
Signal.
2. Press A to toggle it on and off.
The Hourly Time Signal on indicator is shown on the
display in all modes while this function is turned on.
Hourly time signal
on indicator
E-25
To turn an alarm on and off
1. In the Alarm Mode, use D to select an alarm.
2. Press A to cycle through the alarm settings as shown below.
One-Time Alarm
On
Daily Alarm OnAlarm Off
In all modes, the alarm on indicator is shown for the alarm that is currently turned
on.
The alarm on indicator flashes while the alarm is sounding.
E-24
Alarm Operation
The alarm tone sounds at the preset time for 10 seconds, regardless of the mode the
watch is in.
Alarm and Hourly Time Signal operations are performed in accordance with the
Timekeeping Mode time.
To stop the alarm tone after it starts to sound, press any button.
To test the alarm
In the Alarm Mode, hold down D to sound the alarm.
E-23
3. Press C to move the flashing in the sequence shown below to select other
settings.
One-time Alarm/Daily Alarm Selection
MinutesHour
4. While a setting is flashing, use
D and B to change it as described below.
Screen To do this: Do this:
Change the hour and
minutes.
Use D (+) and B (–).
With the 12-hour format, set the time correctly
as a.m. or p.m. ( PM indicator).
/ Toggle between One-time
Alarm and Daily Alarm.
Press D
.
One-time Alarm on:
Daily Alarm on:
5. Press A to exit the setting screen.
E-22
To set an alarm time
1. In the Alarm Mode, use D to scroll through the alarm
screens until the alarm number you want to set is
displayed.
2. After you select an alarm, hold down A until the hour setting of the alarm time
starts to flash, which indicates the setting screen.
This operation turns on the One-time Alarm automatically.
E-21
Alarms
Your watch has a total of five alarms, each of which you
can configure as a daily alarm or one-time alarm.
Daily Alarm: Sounds at the preset time each day.
One-time Alarm: Sounds once at the preset time and
then is disabled automatically.
You can also turn on an Hourly Time Signal that causes
the watch to beep twice every hour on the hour.
All of the operations in this section are performed in the
Alarm Mode, which you enter by pressing C (page E-7).
Alarms operate in coordination with the current Home
City Time.
Alarm on indicator
Alarm number
Alarm time
(Hour : Minutes)
E-20
To change your Home Time city to the current World Time city
1. In the World Time Mode, use D to display the city you want to make your new
Home Time city.
2. Press A and B at the same time.
This makes the World Time city you selected in step 1 your new Home Time city.


Product specificaties

Merk: Casio
Categorie: Horloge
Model: Collection AE-1400WH-3AVEF

Heb je hulp nodig?

Als je hulp nodig hebt met Casio Collection AE-1400WH-3AVEF stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Horloge Casio

Handleiding Horloge

Nieuwste handleidingen voor Horloge