Casio Baby-G BA-110PI-2AER Handleiding

Casio Horloge Baby-G BA-110PI-2AER

Lees hieronder de 📖 handleiding in het Nederlandse voor Casio Baby-G BA-110PI-2AER (5 pagina's) in de categorie Horloge. Deze handleiding was nuttig voor 22 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/5
Operation Guide 5338
MA1304-EA
© 2013 CASIO COMPUTER CO., LTD.
E-1
ENGLISH
Congratulations upon your selection of this CASIO watch.
E-2
About This Manual
Depending on the model of your watch, display text
appears either as dark fi gures on a light background, or
light gures on a dark background. All sample displays
in this manual are shown using dark fi gures on a light
background.
Button operations are indicated using the letters shown in
the illustration.
Note that the product illustrations in this manual are
intended for reference only, and so the actual product may
appear somewhat different than depicted by an illustration.
E-3
Things to check before using the watch
1. Check the Home City and the daylight saving time (DST) setting.
Use the procedure under “To confi gure Home City settings” (page E-12) to confi gure
your Home City and daylight saving time settings.
Important!
Proper World Time Mode data depend on correct Home City, time, and date
settings in the Timekeeping Mode. Make sure you configure these settings
correctly.
2. Set the current time.
See “Adjusting the Digital Time and Date Settings” (page E-15).
The watch is now ready for use.
E-4
Contents
E-2 About This Manual
E-3 Things to check before using the watch
E-7 Mode Reference Guide
E-11 Timekeeping
E-12 Confi guring Home City Sett ings
E-12 To confi gure Home City settings
E-14 To change the Daylight Saving Time (summer time) setting
E-15 Adjusting the Digital Time and Date Settings
E-15 To confi gure the digital time and date settings
E-19 Checking the Current Time in a Different Time Zone
E-19 To enter the World Time Mode
E-19 To view the time in another time zone
E-5
E-20 To specify standard time or daylight saving time (DST) for a city
E-21 Using the Alarm
E-22 To enter the Alarm Mode
E-22 To set an alarm time
E-23 To test the alarm
E-24 To turn an alarm and the Hourly Time Signal on and off
E-24 To stop the alarm
E-25 Using the Stopwatch
E-25 To enter the Stopwatch Mode
E-26 To perform an elapsed time operation
E-26 To pause at a split time
E-26 To measure two fi nishes
E-28 Countdown Timer
E-28 To enter the Countdown Timer Mode
E-29 To confi gure the countdown timer
E-6
E-30 To perform a countdown timer operation
E-30 To stop the alarm
E-31 Adjusting the Analog Hand Setting
E-31 To adjust the analog time
E-33 Illumination
E-33 To turn on illumination
E-34 Button Operation Tone
E-34 To turn the button operation tone on and off
E-35 Troubleshooting
E-36 Main Indicators
E-38 Specifi cations
E-7
Mode Reference Guide
Your watch has 5 “modes”. The mode you should select depends on what you
want to do.
To do t his: Enter t his mode: See:
View the current date in the Home City
Confi gure Home City and daylight saving time (DST)
settings
Confi gure time and date settings
Select 12-hour or 24-hour timekeeping
Adjust the analog hands
Timekeeping Mode E-11
View the current time in one of 48 cities
(29 time zones) around the globe World Time Mode E-19
Set an alarm time Alarm Mode E-21
Use the stopwatch to measure elapsed time Stopwatch Mode E-25
Use the countdown timer Countdown Timer Mode E-28
E-8
Selecting a Mode
Press to cycle between the modes as shown below.C
Timekeeping Mode World Time Mode
CC
E-9
C
Stopwatch Mode Countdown Timer Mode Alarm Mode
CC
In any mode (except when a setting mode, with fl ashing digits is on the display),
press to illuminate the display.B
Operation Guide 5338
E-10
General Functions (All Modes)
The functions and operations described in this section can be used in all of the
modes.
Auto Return Features
If you leave a setting mode with fl ashing digits on the display for two or three
minutes without performing any operation, the watch exits the setting mode
automatically.
Initial Screens
When you enter the World Time Mode or Alarm Mode, the data you were viewing
when you last exited the mode appears fi rst.
Scrolling
The and buttons are used on the setting mode to scroll through data on the B D
display. In most cases, holding down these buttons during a scroll operation scrolls
through the data at high speed.
E-11
Timekeeping
Use the Timekeeping Mode to set and view the current time and date.
Each press of toggles the digital display between the two formats shown D
nearby.
D
Hour
Day of the week
Day of the week
Hour : Minutes
Minutes
Seconds
Month-Day PM indicator
Seconds
Day
E-12
Confi guring Home City Settings
There are two Home City settings: actually selecting the Home City, and selecting
either standard time or daylight saving time (DST).
To con gure Home City settings
1. In the Timekeeping Mode, hold down for about two A
seconds until the seconds start to fl ash. This is the
setting mode.
The watch will exit the setting mode automatically if
you do not perform any operation for about two or
three minutes.
Seconds
E-13
2. Press twice to move the ashing to the city code.C
For details about city codes, see the “City Code
Table” at the back of this manual.
3. Press (East) and (West) to select the city code D B
you want to use as your Home City.
Keep pressing or until the city code you want D B
to select as your Home City appears on the display.
4. After the setting is the way you want, press to return A
to the Timekeeping Mode.
Note
After you specify a city code, the watch will use UTC* offsets in the World Time
Mode to calculate the current time for other time zones based on the current time
in your Home City.
* Coordinated Universal Time, the world-wide scientifi c standard of timekeeping.
The reference point for UTC is Greenwich, England.
City Code
E-14
To change the Daylight Saving Time (summer time) setting
1. In the Timekeeping Mode, hold down for about two A
seconds until the seconds start to fl ash. This is the
setting mode.
2. Press to display the DST setting mode.C
3. Press to toggle between Daylight Saving Time ( ) DON
and Standard Time ( ).OFF
4. After the setting is the way you want, press to A
return to the Timekeeping Mode.
The indicator appears to indicate that Daylight DST
Saving Time is turned on.
DST indicator
E-15
Adjusting the Digital Time and Date Settings
Use the procedure below to adjust the digital time and date settings.
To con gure the digital time and date settings
1. In the Timekeeping Mode, hold down for about two A
seconds until the seconds start to fl ash. This is the
setting mode.
Seconds
E-16
2. Press to move the ashing in the sequence shown below to select the other C
settings.
Seconds
C
DST
C
Home City Code
C
Hour
C
Minutes
C C
Day
C
Month
C
Year
C
12/24-Hour Format
The following steps explain how to con gure timekeeping settings only.
E-17
3. When the timekeeping setting you want to change is ashing, use and/or D B
to change it as described below.
Screen To do t his: Do this:
Reset the seconds to 00 Press .D
Toggle between Daylight Saving Time ( ) ON
and Standard Time ( )OFF Press .D
Change the city code Use (East) and (West).D B
Change the hour or minute Use (+) and (–).D B
Toggle between 12-hour ( ) and 24-hour 12H
( ) timekeeping24H Press .D
Change the year, month, or day Use (+) and ().D B
4. Press to exit the setting mode.A
E-18
Note
For information about selecting a Home City and con guring the DST setting, see
Confi guring Home City Settings” (page E-12).
While 12-hour format is selected for timekeeping, a (PM) indicator will appear P
for times from noon to 11:59 p.m. No indicator appears for times from midnight to
11:59 a.m. With 24-hour format, time is displayed from 0:00 to 23:59, without any
P(PM) indicator.
The watch’s built-in full automatic calendar makes allowances for different month
lengths and leap years. Once you set the date, there should be no reason to
change it except after you have the watch’s battery replaced.
The day of the week changes automatically when the date changes.
E-19
Checking the Current Time in a Different Time Zone
You can use the World Time Mode to view the current
time in one of 29 time zones (48 cities) around the
globe. The city that is currently selected in the World
Time Mode is called the “World Time City”.
To enter the World Time Mode
Use to select the World Time Mode as shown on C
page E-8.
To view the time in another time zone
In the World Time Mode, use (East) to scroll through D
city codes.
Currently selected
World Time City
Current time in the currently
selected World Time City
Operation Guide 5338
E-20
To specify standard time or daylight saving time (DST) for a city
1. In the World Time Mode, use (East) to display the D
city code (time zone) whose Standard Time/Daylight
Saving Time setting you want to change.
2. Hold down for about two seconds.A
This toggles the city code you selected in step1
between Daylight Saving Time ( indicator DS T
displayed) and standard time ( indicator not DS T
displayed).
You cannot use the World Time Mode to change the DST setting of the city
currently selected as your Home City in the Timekeeping Mode.
Note that you cannot switch between standard time/daylight saving time (DST)
while is selected as the World Time City.UTC
The standard time/daylight saving time (DST) setting affects only the currently
selected time zone. Other time zones are not affected.
DST indicator
E-21
Using the Alarm
You can set ve independent daily alarms. When a
daily alarm is turned on, an alarm tone will sound
for about 20seconds each day when the time in the
Timekeeping Mode reaches the preset alarm time. One
of the alarms is a snooze alarm, while the other four
are one-time alarms. The snooze alarm operation will
repeat every ve minutes, up to seven times.
You can also turn on an Hourly Time Signal, which will
cause the watch to beep twice every hour on the hour.
Alarm number
Alarm time (Hour : Minutes)
E-22
To enter the Alarm Mode
Use to select the Alarm Mode as shown on page E-9.C
The snooze alarm screen is indicated by , while the other alarm screens are SNZ
numbered through . The Hourly Time Signal screen is indicated by .AL1 AL4 SI G
When you enter the Alarm Mode, the data you were viewing when you last exited
the mode appears rst.
To set an alarm time
1. In the Alarm Mode, use to scroll through the alarm D
screens until the one whose time you want to set is
displayed.
AL1 AL3 SNZAL2 AL4 SIG
DDDDD
D
Alarm ON/OFF indicator
Alarm indicator
E-23
2. Hold down for about two seconds until the alarm time starts to fl ash. This is A
the setting mode.
3. Press to move the ashing between the hour and minute settings.C
4. While a setting is fl ashing, use (+) and (–) to change it.D B
When setting the alarm time using the 12-hour format, take care to set the time
correctly as a.m. (no indicator) or p.m. ( indicator).P
5. Press to exit the setting mode.A
To test the alarm
In the Alarm Mode, hold down to sound the alarm.D
E-24
To turn an alarm and the Hourly Time Signal on and off
In the Alarm Mode, use to select an alarm or the D
Hourly Time Signal.
When the alarm you want or the Hourly Time Signal
is displayed, press to toggle it between on (A
displayed) and off (“ ” displayed).
The alarm on indicator (when any alarm is on), snooze
alarm indicator (when the snooze alarm is on), and the
Hourly Time Signal on indicator (when the Hourly Time
Signal is on) are shown on the display in all modes.
To stop the alarm
Press any button.
Hourly time signal
on indicator
Snooze alarm indicator
E-25
Using the Stopwatch
The stopwatch measures elapsed time, split times, and two fi nishes.
To enter the Stopwatch Mode
Use to select the Stopwatch Mode as shown on C
page E-9.
1/100 Seconds
Split
Seconds
Hours
Minutes
E-26
To perform an elapsed time operation
D D D D A
Start Stop (Restart) (Stop) Reset
To pause at a split time
D A A D A
Start Split
( displayed)SPL
Split release Stop Reset
To measure two fi nishes
D A D A A
Start Split
( displayed)SPL
First runner nishes.
Display time of fi rst
runner.
Stop
Second runner
nishes.
Split release
Display time of
second runner.
Reset
E-27
Note
The Stopwatch Mode can indicate elapsed time up to 23hours, 59minutes,
59.99seconds.
Once started, stopwatch timing continues until you press to stop it, even if D
you exit the Stopwatch Mode to another mode and even if timing reaches the
stopwatch limit defi ned above.
Exiting the Stopwatch Mode while a split time is frozen on the display clears the
split time and returns to elapsed time measurement.
E-28
Countdown Timer
The countdown timer can be set within a range of
one minute to 24hours. An alarm sounds when the
countdown reaches zero.
To enter the Countdown Timer Mode
Use to select the Countdown Timer Mode as shown C
on page E-9.
Seconds
MinutesHours
E-29
To con gure the countdown timer
1. While the countdown start time is on the display in
the Countdown Timer Mode, hold down until the A
current countdown start time starts to fl ash, which
indicates the setting mode.
If the countdown start time is not displayed, use the
procedure under To perform a countdown timer
operation” (page E-30) to display it.
2. Press to move the ashing in the sequence shown C
below to select other settings.
Start Time (hours) Start Time (minutes)
C


Product specificaties

Merk: Casio
Categorie: Horloge
Model: Baby-G BA-110PI-2AER

Heb je hulp nodig?

Als je hulp nodig hebt met Casio Baby-G BA-110PI-2AER stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Horloge Casio

Handleiding Horloge

Nieuwste handleidingen voor Horloge