Canarm Treehouse IOL303 Handleiding

Bekijk gratis de handleiding van Canarm Treehouse IOL303 (1 pagina’s), behorend tot de categorie Verlichting. Deze gids werd als nuttig beoordeeld door 7 mensen en kreeg gemiddeld 4.7 sterren uit 3 reviews. Heb je een vraag over Canarm Treehouse IOL303 of wil je andere gebruikers van dit product iets vragen? Stel een vraag

INSTALLATION:

Rubber

washer

Cap

Nut

OUTDOOR LIGHTING

Tel: (613) 342-5424, Fax: (800) 263-4598

White

Black

House supply

Ground wire

Fixture

Ground wire

IOL303

09/16

SAFETY PRECAUTIONS:

TOOLS AND MATERIALS REQUIRED:

Phillips

Screwdriver

Wire Cutters

PliersWrench

!

INSTRUCTIONS PERTAINING TO RISK OF FIRE OR INJURY TO PERSONS

READ ALL INSTRUCTIONS

IMPORTANT SAFETY

INSTRUCTIONS

SAVE THESE INSTRUCTIONS

QUESTIONS OR CONCERNS CONTACT AT:

1-800-265-1833 (English) / 1-800-567-2513 (French)

Monday through Friday 8:00 AM to 5:00 PM E.S.T.

Wiring supplies

as required by

local electrical

code

1. TURN OFF ELECTRICAL POWER BEFORE STARTING INSTALLATION OF LIGHT FIXTURE.

2. THIS PRODUCT MUST BE INSTALLED IN ACCORDANCE WITH THE APPLICABLE INSTALLATION CODE

BY A PERSON FAMILIAR WITH THE CONSTRUCTION AND OPERATION OF THE PRODUCT AND THE

HAZARDS INVOLVED.

3.

CONNECT THE GROUND WIRE (BARE COPPER OR GREEN) FROM YOUR FIXTURE TO THE GROUND

WIRE (BARE COPPER OR GREEN) OF SUPPLY WIRE.

4. TO CLEAN THE FIXTURE, TURN OFF THE POWER, WAIT FOR IT TO COOL, AND WIPE THE FIXTURE WITH A

CLEAN, SOFT CLOTH.

NOTE: Product may not look exactly as shown in figures.

Bulb

1.

Set fixture over the post and mark the location of the three

mounting holes on the post. Drill the three holes in the post

using a drill bit.

2.

Connect the ground wire from the fixture to the supply

ground. Attach the black wire from the fixture to the black wire of

the supply wire, then white wire to white wire using marrets.

3.

Tuck the wires into the post. Align the holes on the fixture with

the holes in the post and secure with three mounting screws.

4.

Install proper bulb type and wattage (not included).

5.

Position the top over the fixture and secure with the rubber

washers and cap nuts.

Mounting

Screws

Top cover

Product specificaties