Canarm IPL318A03AL Handleiding
Canarm
Verlichting
IPL318A03AL
Bekijk gratis de handleiding van Canarm IPL318A03AL (1 pagina’s), behorend tot de categorie Verlichting. Deze gids werd als nuttig beoordeeld door 4 mensen en kreeg gemiddeld 4.7 sterren uit 2.5 reviews. Heb je een vraag over Canarm IPL318A03AL of wil je andere gebruikers van dit product iets vragen? Stel een vraag
Pagina 1/1
INSTALLATION:
Imported By: CANARM LTD., 2157 Parkedale Ave., Brockville, Ontario, K6V 5V6, Tel: (613) 342-5424, Fax: (613) 342-8437
SAFETY PRECAUTIONS:
!
“INSTRUCTIONS PERTAINING TO RISK OF FIRE OR INJURY TO PERSONS”
“READ ALL INSTRUCTIONS”
“IMPORTANT SAFETY
INSTRUCTIONS”
“SAVE THESE INSTRUCTIONS”
4. Connect the ground wire
(bare copper or green) from
your fixture to the ground
wire (bare copper or green)
or ground screw in the
electrical outlet box. Connect
black wire from fixture to black
wire in outlet box and connect
the white wire from fixture to
white wire in outlet box.
5. Tuck electrical wires into
outlet box and position fixture
over studs or nipple on
mounting bracket assembly.
Secure fixture in place with star
washers and cap nuts.
6. Install the proper bulb
type and wattage (not
included).
White
Fixture
Black
Ground
Wire
Studs
“B”
Star
Washer
Cap
Nut
Fixture
Stud
1. Loosen “B”. Adjust stud to
desired length and lock in place
with “B”.
2. Mount the mounting
bracket to outlet box using
outlet box screws
(not included)
.
Make sure the studs or nipple
on the mounting bracket are
facing out from the outlet box.
3. Screw lower downrod into
the fixture. Install swivel to the
rod, ensuring that the sleeve is
at the swivel. Tighten the
locking nut to secure rod to the
fixture.
Note: Remove fixture pan, plate
and rods if required (If you wish
to change the downrod length)
Install the length of rod that is
required by threading wire
through the rod and securing it
to the fixture.
Caution: Risk of fire, keep at least
an 14 3/4” distance from the
ceiling to the top surface of
diffuser.
Outlet Box
Screws (not included)
Outlet
Box
Mounting
Bracket
Fixture
Locking
Nut
Sleave
Rod
at
least
14 3/4”
Swivel
TOOLS AND MATERIALS REQUIRED:
Star-headed
Screwdriver
Wire Cutters
Pliers Wrench
Wiring supplies
as required by
the Canadian
Electrical Code
and/or the
Quebec
Electrical code
QUESTIONS OR CONCERNS CONTACT CANARM AT:
1-800-265-1833 (English) 1-800-567-2513 (French)
Monday through Friday 8:00 AM to 5:00 PM E.S.T.
IPL318A03
01/16
SUSPENDED
TRACK LIGHTING
1. TURN OFF ELECTRICAL POWER BEFORE STARTING INSTALLATION OF LIGHT FIXTURE.
2. THIS PRODUCT MUST BE INSTALLED IN ACCORDANCE WITH THE APPLICABLE INSTALLATION CODE
BY A PERSON FAMILIAR WITH THE CONSTRUCTION AND OPERATION OF THE PRODUCT AND THE
HAZARDS INVOLVED.
3. CONNECT THE GROUND WIRE (BARE COPPER OR GREEN) FROM YOUR FIXTURE TO THE GROUND
WIRE (BARE COPPER OR GREEN) OR GROUND SCREW IN THE ELECTRICAL OUTLET BOX.
Bulb
Product specificaties
| Merk: | Canarm |
| Categorie: | Verlichting |
| Model: | IPL318A03AL |
Heb je hulp nodig?
Als je hulp nodig hebt met Canarm IPL318A03AL stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Verlichting Canarm
27 Augustus 2025
25 Augustus 2025
11 Juni 2025
11 Juni 2025
10 Juni 2025
4 April 2025
4 April 2025
4 April 2025
4 April 2025
4 April 2025
Handleiding Verlichting
- Dorr
- Beper
- Light4Me
- Sirius
- Gewiss
- IFM
- Rotolight
- Nedis
- Dupla
- INKEE
- Varta
- Pauleen
- Jung
- Currey & Company
- Easymaxx
Nieuwste handleidingen voor Verlichting
28 Augustus 2025
27 Augustus 2025
27 Augustus 2025
27 Augustus 2025
27 Augustus 2025
27 Augustus 2025
27 Augustus 2025
26 Augustus 2025
26 Augustus 2025
26 Augustus 2025